Product description: NVMe SSD adapter for NanoPi M4
The NanoPi adapter from FriendlyARM allows you to connect the SSD to the ARM NanoPi M4 board based on the RK3399 SoC. The adapter provides a read and write speed of 500 MB / s , supports a 12V fan via PWM. It is equipped with 1 PCIe 2.1 slot and 2 M.2 slots. The adapter supports the following operating systems: Android 7.1.2, Android 8.1, Lubuntu 16.04, FriendlyCore 18.04, FriendlyDesktop 18.04. The actual dimensions of the device are 88.9 x 56 x 19.5 mm. The weight of the device is 19.5 g.
NVMe SSD Adapter for NanoPi M4.
NanoPi NVMe SSD Adapter.
Description of the pins on the board:
- JST GH-3-pin connector for 12 V fan (PWM control)
- Antenna socket x2
- M.2 KEY-M (PCIe 2.1 x2, NVMe SSD)
- Power button
- CON1
Additional information can be found in the user's guide prepared by the manufacturer
Specification of NVMe SSD adapter for NanoPi M4
- Interfaces:
- 1x PCIe 2.1
- 2x M.2 Key-M slot
- 1x JST GH-3-Pin connector for 12 V fan (PWM1 control)
- Button: 1x power button
- Supported module: NanoPi M4
- Supported Operating Systems:
- Android 7.1.2
- Android 8.1
- Lubuntu 16.04 (32-bit)
- FriendlyCore 18.04 (64-bit)
- FriendlyDesktop 18.04 (64-bit)
- Weight: 19.5 g
- Dimensions: 88.9 x 56 x 19.5 mm
The NanoPi adapter from FriendlyARM.
Useful links |
