- New
Product description: Aeotec aerQ - temperature and humidity sensor - Z-Wave
The Aeotec aërQ is a small sensor for monitoring key indoor air parameters. It measures temperature , relative humidity , and calculates dew point , providing precise data to the smart home system. Based on the readings, the central unit can control heating, ventilation, or dehumidification , improving user comfort. The sensor uses Z-Wave Plus V2 (Z-Wave 700) wireless technology, which ensures stable communication, long network range, and low energy consumption. An additional function of the sensor is to analyze the risk of mold formation based on temperature and humidity, allowing you to quickly respond to unfavorable room conditions. Its energy-efficient design allows it to operate for up to 2 years on a single CR2477 battery , making it a practical component of a modern home automation system.
The sensor requires a compatible Z-Wave gateway to function properly.
Aeotec aerQ - temperature and humidity sensor - Z-Wave.
Temperature and humidity sensor operating in the Z-Wave standard.
Main features of the Aeotec aërQ sensor
- Temperature measurement : operating range from -10°C to 65°C, accuracy up to ±1°C
- Relative humidity measurement : range from 0% RH to 80% RH, accuracy ±3%
- Dew point : automatic calculation of a value helpful in assessing comfort and moisture condensation
- Mold risk detection : local LED indication and reporting to the control panel
- Z-Wave 700 : greater range, low power consumption and stable communication
- SmartStart : quickly add a device to the network by scanning a QR code
- S2 Security : AES-128 encryption for increased transmission security
- Long battery life : up to 2 years with factory settings
- Compact housing : small dimensions make it easy to install in a home, apartment or office
Modern Z-Wave Plus V2 communication and S2 security in Aeotec aërQ
The Aeotec aërQ sensor utilizes the modern Z-Wave Plus V2 communication standard, based on the Z-Wave 700 (Gen7) hardware platform. This technology provides greater communication range, lower power consumption, and faster data transmission between smart home devices. The Z-Wave system creates a mesh network in which mains-powered devices can act as signal amplifiers for other components. This ensures stable operation of the entire system, even in larger homes. The S2 Security standard ensures a high level of communication security. It utilizes AES-128 encryption, protecting devices from unauthorized access and potential network attacks. Additionally, the SmartStart feature allows for automatic addition of devices to the network by scanning a QR code.
The sensor is equipped with an LED - green indicates suitable conditions, while red warns against the possibility of mold formation.
Aeotec aërQ has a very small size, making it suitable for a variety of spaces.
Compatible Z-Wave Gateways for Aeotec aërQ
The sensor works with many Z-Wave-enabled smart home controllers . The Aeotec aërQ is fully compatible with select Aeotec, Fibaro, Homey, Ezlo, and Z-Wave.Me gateways. Compatible controllers include:
- Aeotec Smart Home Hub
- ezlo Plus
- Fibaro Home Center 3
- Fibaro Home Center 3 Lite
- Homey Bridge
- Homey Pro 2023
- Homey Pro 2026
- Z-Wave.Me UZB Smart Home Stick
- Z-Wave.Me Z-Station
Technical specifications of the Aeotec aërQ temperature and humidity sensor
- Communication: Z-Wave Plus V2
- Hardware platform: Z-Wave 700
- Security: S2 Security
- SmartStart support: yes
- Temperature measurement: -10°C to 65°C
- Temperature measurement accuracy: ±1°C
- Humidity measurement: 0% RH to 80% RH
- Humidity measurement accuracy: ±3%
- Dew point measurement: -10°C to 65°C
- Operating humidity: 10% to 95%
- Operating temperature: 0°C to 45°C
- Storage temperature: -30°C to 70°C
- Indoor range: over 50 m
- Outdoor range: up to 150 m
- Power supply: 1 x CR2477 battery, 3V
- Battery life: up to 2 years
- Degree of protection: IP20
- Frequency: 868.4 MHz
- Dimensions: 34 x 34 x 16 mm
- Weight: 12 g
Contents of the set
- Aeotec aërQ sensor
- CR2477 battery
- User manual
The sensor is powered by a CR2477 battery.
Useful links |
