Description: Fiberlogy FiberSilk 1,75mm 0,85kg - Anthracite
WaterproofFiberSilkfilament in anthracite colourwitha diameter of 1.75 mm. The material is characterized by a silky,metallic glowthat brings out every detail of the model and all its bends and curves, and is distinguished by its high strength, impact resistance and very good combination of layers during printing. FiberSilk ismore durable than traditional PLA.It can be used in allFFF/FDM printersthat do not have protection against filaments from other manufacturers.0.85 kg ofmaterial is wound on the spool.
In our offer of filaments you will also find other materials and colors.
Filament Fiberlogy FiberSilk 1.75 mm 0.85 kg - Anthracite.
When loading the file and during printing you can see swelling of the material, this is a normal effect with this type of material. This is due to the surface tension of the polymers included in the filament. For better effects, the manufacturer recommends setting high airflow during printing and lowering the printing speed.
Suggested parameters of printing with the filament
Printing temperature | From 210°C to 230°C |
Table temperature | From 50°C to 70°C |
Print speed | From 35 to 60 mm/s |
Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the pillar
Parameter | Scope |
---|---|
Diameter of pillar | 1.75 mm |
Dimensional tolerances of the philanthropy | +/- 0,02 mm |
Colour | Anthracite (anthracite) |
Printing temperature | From 210°C to 230°C |
Table temperature | From 50°C to 70°C |
Material | FiberSilk |
Reel diameter | 200 mm |
Reel width | 80 mm |
Mounting hole diameter | 52 mm |
Moisture absorber | Yes |
Vacuum packing | Yes |
Roundness | +/- 0.01 mm |
Packaging dimensions | 205 x 205 x 90 mm |
Net weight | 0.85 kg |
The graph of the properties of the filament.
Useful links |