MicroSD card reader module with 5V voltage converter - Pololu 2587

Index: PLL-04083 EAN: 5904422300371

The reader of memory micro SD card module from Pololu with goldpin connectors - 2.54 mm pitch for self-soldering. It communicates with main board via SPI interface, it has a built-in controller and converter so it works with a voltage of 5 V.

MicroSD card reader module with 5V voltage converter - Pololu 2587
€11.50
€9.35 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Pololu
Compatibility: Arduino

Description

The reader of memory micro SD card module from Pololu with goldpin connectors - 2.54 mm pitch for self-soldering. It communicates with main board via SPI interface, it has a built-in controller and converter so it works with a voltage of 5 V. In our offer, available are alsoreaders operating with the voltage of 3.3 V.

Czytnik kart micro SD 

The set includes the module and the goldpin strap for self-soldering, the microSD cardcan be purchased separately.

 

The product is compatible with Arduino

To use the module, you can usethe standard SD library.

 

Connection

The SD cards communicate using the SPI bus. Most of the microcontrollers, including those used inArduinoAVRy, have hardware control of this interface. The functions of the findings are presented in the array below.

 Czytnik kart microSD

Pin Description
GND The ground of the module.
VDD The supply voltage of 5 V.
EN Pin to activate the voltage regulator of 3.3 V. It is pulled up to VDD through a resistor of 100 so the regulator is enabled by default.
CD Card detection. In case of the absence of a pin card, it is in the low status, when the card is in the connector, the status is high. The pin is pulled up to VDD through a resistor of 100.

CS

Selecting device (chip select) in SPI mode. For operation of the module, you must indicate the low status.
SCLK

Clock line of the SPI bus.

DO

The output data (MISO) in SPI bus.

DI

Input data (MOSI) of the SPI bus.

3V3

The output ofthe voltage regulator of 3.3 V.
 
The module has a built-in regulator and voltage converter so you can connect it directly to boards operating with a voltage of 5 V, for example,Arduino UnoandLeonardo.

 Specification

  • Supply voltage: 5 V
  • Built-in slot for microSD memory cards
  • Built-in voltage regulator: 5 V / 3.3 V
  • Built-in converter of voltage
  • The set includes the goldpin strap for independent soldering
  • Board sizes: 24 x 23 x 3 mm
  • Weight: 1.8 g

 

Package width 7.7 cm
Package height 8.5 cm
Package depth 0.3 cm
Package weight 0.003 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: