- Reduced price
- Promotion
- Reduced price
- Promotion
iNode MCU Relay - Bluetooth 4.1 and WiFi - for iNode Care Sensor
Index: INO-21204
- On sale!
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
Raspberry Pi 5 GPIO extensions and HAT - Strona 3
Loading...
HiFiBerry DAC+ ADC Pro - sound card for Raspberry Pi 4B/3B+/3B
Sound card in the form of a 40-pin overlay for the Raspberry Pi minicomputer version 4B / 3B+ / 3B and above. Overlay powered directly from the minicomputer. It is equipped...
Index: RHF-16965
Index: RHF-16965
- Reduced price
- Promotion
Proto Hat to Raspberry Pi 4B/3B+/3B/2B
Board allows for independent creation of electronic circuits. It is connected directly to the GPIO pins of the Raspberry Pi minicomputer, version 4B / 3B+ / 3B / 2B.
Index: MOD-09422
Index: MOD-09422
PCF8591 - A/D and D/A converter, 8-bit I2C v2
Module with A/D converter - 4 channels and D/A - 1 output. It works with voltage from 2.5 V to 6.0 V, and communicates over I2C. The board also contains: potentiometer,...
Index: MOD-02632
Index: MOD-02632
RPi Relay Board - 3 relays - cap for Raspberry Pi - Waveshare 11638
Cap fitted to connectors of Raspberry Pi GPIO in version 4B, 3B+, 3B, 2B, B+ and A+, with three relays with parameters of 250 V / 10 A. Board has a screw connector....
Index: WSR-06804
Index: WSR-06804
Cap HAT GSM / GPRS / GNSS / Bluetooth for Raspberry Pi - Waveshare 13460
Cap adjusted to the GPIO connectors for Raspberry Pi 3 / 2 / Zero / Zero, which provides connection through standard GSM, GPRS, GPS and Bluetooth. Allows voice chat, to send...
Index: WSR-09893
Index: WSR-09893
ReSpeaker Mic Array v2.0 by Seeed is another more extended version of ReSpeaker Mic Array v1. The board with built-in long-range microphone, capable of detecting voices at a...
Index: SEE-14133
Index: SEE-14133
IQaudIO DAC+ - sound card for Raspberry Pi 4B/3B+/3B
The sound card designed for the Raspberry Pi minicomputer provides high quality Full HD 24-bit/192 kHz audio with built-in hardware volume control via the Linux built-in...
Index: RPI-18615
Index: RPI-18615
The module enables easy connection of all GPIO Raspberry minicomputer outputs in versions 4, 3, 2 and B+ with any contact plate without the need for soldering. The chip is...
Index: ADA-02781
Index: ADA-02781
OnOff SHIM - on / off switch - overlay for Raspberry Pi
OnOff SHIM is a shield for the Raspberry Pi, mounted on the GPIO connectors. After disconnecting the power supply to the micro USB port on the shield, you can turn on and off...
Index: PIM-10633
Index: PIM-10633
Ethernet / USB (B) HUB - 3xUSB 1xRJ45 Ethernet - frontend Overlay for Raspberry Pi - Waveshare 20416
Overlay for Raspberry Pi, adding three USB ports and one RJ45 Ethernet port. It has an embedded Ethernet RTL8152B chip. The pogo pin layout allows the overlay to connect...
Index: WSR-20080
Index: WSR-20080
PCIe Pipe 50mm flexible cable for NVMe Base and Raspberry Pi - Pimoroni PIM702
A flexible 50 mm long ribbon cable allows easy connection of NVMe Base with Raspberry Pi 5 . Designed for PCIe Gen 3 speeds, it also perfectly supports Gen 2 , making...
Index: PIM-24852
Index: PIM-24852
ADS1015 - ADC 12-bit 4-channel I2C converter - Adafruit 1083
Module with analog-to-digital converter with 12-bit accuracy. Operates at speed up to 3300 samples per second. Has the ability to change the amplification up to 16 x. It is...
Index: ADA-02618
Index: ADA-02618
Qwiic HAT for Raspberry Pi - SparkFun DEV-14459
Shield, type HAT for Raspberry Pi, facilitating the connection of modules SparkFun via connectors Qwiic. The shield connects the I2C bus on the Raspberry Pi with connectors Qwic.
Index: SPF-10664
Index: SPF-10664
The module with the HAT shield for Raspberry Pi is equipped with eight HLS8L relays with a coil powered with a voltage of 5 V along with optoelectronic insulation. The system...
Index: WSR-13301
Index: WSR-13301
HiFiBerry Digi2 Pro 2.2 - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero
HiFiBerry Digi2 Pro 2.2 is a Hat overlay sound card for Raspberry Pi versions 4B / 3B+ / 3 / 2 / B+ / A+ and Zero. Manufactured by HiFiBerry , it features a high quality...
Index: RHF-19063
Index: RHF-19063
SIM868 GSM/GPRS/GNSS + Bluetooth - communication module for Raspberry Pi Pico - Waveshare 20268
CAN FD Expansion HAT is a CAN bus expansion overlay produced by Waveshare. It supports the original CAN 2.0 protocol and the CAN FD expansion with higher data throughput....
Index: WSR-20081
Index: WSR-20081
1 Wire Pi Plus DS2482 - 1-Wire module for Raspberry Pi
Shield for Raspberry based on DS2482-100 system which allows you to use the 1-Wire protocol. The module provides a conversion of the I2C interface. It has built-in a RJ12...
Index: ABE-11711
Index: ABE-11711
Argon Fan HAT v1.5 - module with fan for Raspberry Pi
Overlay with 40 x 40 mm fan for Raspberry Pi 4B / 3B+ / 3B. After downloading the script from the manufacturer's website, you can adjust the fan speed . There is a power /...
Index: ARG-15394
Index: ARG-15394
Mini PoE Hat - PoE module for Raspberry Pi 4B/3B+/3B + fan - UCTRONICS U6110
A cap to power Raspberry Pi minicomputers using Power over Ethernet technology. This solution allows you to power the minicomputer using a network cable with an RJ-45...
Index: ACM-16898
Index: ACM-16898
Motor Driver HAT TB6612FNG - dual channel 12V/3A for Raspberry Pi - SB Components SKU21789
Overlay for Raspberry Pi equipped with 40-pin GPIO connector, including model 4B / 3B+ / 3B. HAT features a TB6612FNG dual channel DC motor driver, operating from 6 V to...
Index: SBC-20401
Index: SBC-20401
- On sale!
- Promotion
Pineboards HatDrive! Nano - NVMe 2230, 2242 adapter for Raspberry Pi 5
HatDrive! Nano is a dedicated adapter that allows you to connect an NVMe SSD drive to a Raspberry Pi 5 single-board computer. Designed with memory expansion in mind, it...
Index: PIB-25170
Index: PIB-25170
Logic level converter I2C PCA9306 - SparkFun BOB-15439
The module allows bidirectional communication between circuits using different voltage levels for I2C and SMBus. PCA9306 converts voltages from lower range from 1.2 V to 3.3 V...
Index: SPF-01709
Index: SPF-01709
ADC 16-bit converter - 4-channel ADS1115 - overlay for Raspberry Pi
Shield for Raspberry Pi with analog-digital converter of 16-bit accuracy and a small package MSOP-10. It has programmable data transfer speed from 8 to 860, 4 analog inputs and...
Index: MOD-09861
Index: MOD-09861
HiFiBerry Amp2 amplifier of class D 60 W for Raspberry Pi 4B/3B+/3B/2/B+/A+
Cap type Hat for Raspberry version 4B, 3B+, 3B, 2B, A+, B with a built-in class D amplifier with power of 60 W. The device supports speakers with an impedance of 4 Ω to 8 Ω,...
Index: RHF-09886
Index: RHF-09886
