Product description: Filter cartridge for Snapmaker 2.0 air purifier
Filter cartridge designed for the Snapmaker 2.0 air pur ifier. Five layers of different filters combined into one, designed to absorb everything that is emitted into the air during the laser engraving or 3D printingprocess.
- G4 filter for coarse filtration. It is designed for particles larger than 5 μm in diameter. Filters out more than 90% of PM10 and PM5 particles, as well as solid particles and dust.
- F9 filter for more precise filtration. Works on particles with a diameter of 1 μm or more. Filters more than 95% of PM10, PM5 and PM2.5 particles.
- The manufacturer has also used a carbon filter. It was added to absorb volatile organic compounds that particle filters are unable to capture. Unpleasant odor will therefore no longer be a problem.
- As a final filter, two 70 mm HEPA H13 layers are used. They are able to capture up to 99.97% of all airborne particles of all sizes, including PM0.3.
Snapmaker 2.0 Air Purifier Filter Cartridge.
The cartridge is constructed with 5 layers of different filters.
Life of the filter cartridges
To maximize the life of the cartridge, the different filter levels are arranged in a specific order. This way, you won't have to replace the cartridge until it is fully utilized. The Snapmaker 2.0 monitors filter performance in real time and shows filter usage on the touch screen. The device will signal when it's time to replace the cartridge.
Technical specifications of the filter cartridges:
- Cartridge life: approximately 3 months
- Number of cartridges per package: 2
- Filter cartridge dimensions: 191 mm × 229 mm × 308 mm
- Package dimensions: 436 mm × 283 mm × 390 mm
- Weight of single filter cartridge: 2.4 kg
- Weight with packaging: 6.1 kg
