Product description: Filament Devil Design ABS+ 1.75 mm 1 kg - Dark Gray
The dark gray ABS+ filament is a special type of thermoplastic plastic that is a modification of standard ABS. This type of filament is intended for use in 3D printers that have no restrictions on the source of the filament, as well as in "open source" printers. ABS+ is widely used, especially in the toy and automotive industries. It can be mechanically processed and is resistant to scratches and damage . The ABS+ filament is delivered in a vacuum-packed spool, with an additional moisture absorber to maintain its properties. Each spool contains 1 kg of filament with a diameter of 1.75 mm .
Filament Devil Design ABS+ 1.75 mm 1 kg - Dark Gray.
The ABS+ filament is resistant to scratches and damage.
Suggested filament printing parameters
| Head temperature | From 235°C to 255°C |
| Table temperature | From 90°C to 100°C |
| Print cooling | Not recommended |
Due to differences in the design of printers, the above data should be treated as guidelines and the appropriate values should be determined experimentally.
Technical specifications and properties of the Devil Design ABS+ filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75mm |
| Dimensional tolerance of the filament | +/- 0.05mm |
| Color | Dark Grey |
| Printing temperature | From 235°C to 255°C |
| Table temperature | From 90°C to 100°C |
| Print speed | 55 mm/s |
| Material | ABS+ |
| Desiccant | Yes |
| Vacuum packaging | Yes |
| Net weight | 1 kg |
