Product description: Filament Spectrum r-PLA 1.75 mm 1 kg - Signal Red
Filament r-PLA by Spectrum for 3D printers in red in the form of a fiber wound on ecological cardboard spools. The diameter of the material is 1.75 mm , the net weight is 1 kg . The product is hermetically packed with a desiccant. The mounting hole diameter is 52 mm. The product requires a heated bed to properly form prints. Filament is an ecological creation made of recycled residual waste.
In our offer of filaments you will also find other materials and colors.
Filament Spectrum r-PLA 1.75 mm 1 kg - Signal Red.
Features of the r-PLA filament
- The product is made of recycled materials
- Less negative impact on the environment thanks to the reuse of waste
- Ecological, cardboard spool
- Ease of printing comparable to PLA filament
- No shrinkage after cooling down
- Heat deformation temperature - 55 ° C
Suggested filament printing parameters
| Printing temperature | 190 ° C to 215 ° C |
| Table temperature | 40 ° C to 50 ° C |
| Print speed | From 30 mm / s to 90 mm / s |
| Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Color | Red |
| Printing temperature | 190 ° C to 215 ° C |
| Table temperature | 40 ° C to 50 ° C |
| Material density | 1.24 g / cm³ |
| Spool - material | r-PLA |
| Spool outer diameter | 200 mm |
| Spool width | 67 mm |
| Mounting hole diameter | 52 mm |
| Package | Cardboard with print |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Spool dimensions | 200 x 52 x 67mm |
| Net weight | 1 kg |
