- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: LookO2 v4F - maintenance-free smog / dust / air purity PM1 / PM2.5 / PM10, HCHO, temperature, humidity sensor
Maintenance-free WiFi LookO2 v4F air purity sensor based on the PMS5003 system. The v4F version also has a built-in formaldehyde, temperature and humidity sensor. Thanks to the built-in WiFi module and 3D antenna, it is possible to send data to a web server. The device uses laser measurement to test the concentration of PM1, PM2.5 and PM10 dust. The data collected by the sensor is sent to the main server www.looko2.com , where, after analysis, they are placed on the website together with data from other sensors. Local measurement is performed every 60 seconds. LookO2 allows you to read data via a website or through a dedicated application for a smartphone with iOS or Android. On the front panel of the module you can find five colored LEDs informing about the level of air pollution. The module is powered with the voltage of 5 V using the included power supply or, for example, a power bank. The applied waterproof housing allows for external mounting.
A detailed description of the operation can be found in the user manual .
Smog sensor LookO2 v4F.
LookO2 v4F wireless air quality sensor.
Main features of the LookO2 v4F sensor
- Air pollution level and measurement statistics available on the website
- Works with applications available for Android and iOS mobile devices
- Possibility to power e.g. from a power bank with 5 V via a USB type C connector
- Built-in WiFi module with 3D antenna
- Information panel that allows you to read the last measurement of PM1, PM2.5, PM10 in the local network
- Diagnostic panel informing about the device status
- Intelligent LED system that informs about the need to send the device for technical inspection over time
- Possible reconfiguration of the sensor without the need for a physical reset
- Automatic software update system to a newer version, without the need to send the device to the service
- Allows you to enter GPS coordinates
- It allows you to use data (via API) and add readings from the sensor to smart home systems (including Fibaro HC2, Fibaro HC3, Home Assistant, Domoticz)
- Provides free data stored in the archive
- It shows the pollution measurement by 5 bright LEDs
Specification of the LookO2 v4F sensor
- Chip: PMS5003
- Automatic sensor, maintenance-free
- Supply voltage: 5 V (power adapter included)
- Power Connector: USB Type-C
- Maximum power consumption: less than 0.9W
- Dust sensor:
- Measurement range:
- 0.3 μg / m3 to 1 μg / m3
- from 1 μg / m3 to 2.5 μg / m3
- 2.5 μg / m3 to 10 μg / m3
- Measurement resolution: 1 μg / m3
- Maximum measurement error:
- in the range from 0 μg / m3 to 100 μg / m3: 10 μg / m3
- in the range from 100 μg / m3 to 500 μg / m3: +/- 10%
- Formaldehyde sensor:
- Measuring range of formaldehyde: from 0 mg / m3 to 1 mg / m3
- The maximum range of formaldehyde: from 0 mg / m3 to 2 mg / m3
- Accuracy of formaldehyde measurement: 0.001 mg / m3
- Maximum error of formaldehyde consistency: <+/- 5%
- Temperature sensor:
- Maximum temperature measurement range: -20 ° C to 99 ° C
- Measurement accuracy: up to 0.1 ° C
- Maximum temperature measurement error: +/- 0.5 ° C
- Humidity sensor:
- Maximum range of humidity measurement: from 0% to 99%
- Accuracy of humidity measurement: 0.1%
- Maximum humidity measurement error: +/- 2%
LookO2 v4F - maintenance-free smog / dust / air purity PM1 / PM2.5 / PM10, HCHO, temperature, humidity sensor.
The sensor is equipped with colored LEDs.
- Working temperature: from -10 ° C to 60 ° C
- Storage temperature: -40 ° C to 60 ° C
- Humidity range: 0% to 99%
- Displays the pollution level on the website
- Information about measurements available in the local network
- Cooperation with smartphone applications
- Measurement made every 60 seconds
- Built- in WiFi module with 3D antenna
- Watertight housing for outdoor installation
- The possibility of updating the software
- The ability to save the GPS position: it facilitates the location on the site
- The LookO2 platform provides an API for building your own application
- Device dimensions: 115 x 90 x 55 mm
Kit contents
- LookO2 v4F - maintenance-free smog / dust / air purity PM1 / PM2.5 / PM10, HCHO, temperature, humidity sensor
- 5 V power supply with 120 cm cable
- Guarantee
- Lanyard LookO2
- Mounting brackets
