- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: LookO2 v4 - maintenance-free smog / dust / air purity PM1 / PM2.5 / PM10 sensor
LookO2 v4 is a maintenance-free WiFi air purity sensor based on the PMS5003 system. It measures the concentration of PM1, PM2.5 and PM10 dust in the air. It has a built- in WiFi module with a 3D antenna, thanks to which it is possible to send data to a web server. The device uses laser measurement to test the concentration of PM1, PM2.5 and PM10 dust. The data collected by the sensor is sent to the main server www.looko2.com , where, after analysis, they are placed on the website together with data from other sensors. The sensor is measured locally every minute. LookO2 allows you to read data via a website or through a dedicated application for a smartphone with iOS or Android. Additionally, on the front panel there are five colored LEDs informing about the level of air pollution. The module is powered with the voltage of 5 V using the included power supply or, for example, a power bank. The applied waterproof housing allows for external mounting.
A detailed description of the operation can be found in the user manual .
Smog sensor LookO2 v4.
LookO2 wireless air quality sensor v4.
Main features of the LookO2 v4
- Air pollution status and statistics available on the website
- Works with applications available for mobile devices
- Possibility to power e.g. from a power bank with 5 V
- Built-in WiFi module with 3D antenna
- Information panel that allows you to read the last measurement of PM1, PM2.5, PM10 in the local network
- Diagnostic panel informing about the device status
- Intelligent LED system that informs about the need to send the device for technical inspection over time
- Allows you to reconfigure the sensor without the need for a physical reset
- Automatic software update system to a newer version, without the need to send the device to the service
- Allows you to enter GPS coordinates
- It allows you to use data (via API) and add readings from the sensor to smart home systems (including Fibaro HC2, Fibaro HC3, Home Assistant, Domoticz)
- Provides free data stored in the archive
- It shows the pollution measurement by 5 bright LEDs
LookO2 v4 sensor specification
- Chip: PMS5003
- Automatic sensor, maintenance-free
- Supply voltage: 5 V (power adapter included)
- Power Connector: USB Type-C
- Maximum power consumption: less than 0.9W
- Measurement range:
- 0.3 μg / m3 to 1 μg / m3
- from 1 μg / m3 to 2.5 μg / m3
- 2.5 μg / m3 to 10 μg / m3
- Measurement resolution: 1 μg / m3
- Maximum measurement error:
- in the range from 0 μg / m3 to 100 μg / m3: 10 μg / m3
- in the range from 100 μg / m3 to 500 μg / m3: +/- 10%
- Working temperature: from -30 ° C to 60 ° C
- Storage temperature: -40 ° C to 60 ° C
- Humidity range: 0% to 99%
- Displays the pollution level on the website
- Information about measurements available in the local network
- Cooperation with smartphone applications
- Measurement made every 60 seconds
- Built- in WiFi module with 3D antenna
- Watertight housing for outdoor installation
- The possibility of updating the software
- The ability to save the GPS position: it facilitates the location on the site
- The LookO2 platform provides an API for building your own application
- Device dimensions: 115 x 90 x 55 mm
Kit contents
- LookO2 v4 - maintenance-free smog / dust / air purity PM1 / PM2.5 / PM10 sensor
- 5 V power supply with 120 cm cable
- Guarantee
- Lanyard LookO2
- Mounting brackets
LookO2 v4 - maintenance-free PM1 / PM2.5 / PM10 smog / dust / air purity sensor.
