- Reduced price
Product description: Devil Design Silk 1,75 mm 1 kg - White
FilamentSilkis a thermoplastic material in the form of fiber and is used for3D printingby FFF method. Filament is pre-wound on a spool and vacuum packed with moisture absorber. Spool contains 1 kg of product. It can be used in all FFF printers, which are not protected against the use of filaments from external suppliers. Silk is a mixture of PLA and PETG materials, which is characterized by a very high gloss.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design Silk 1,75 mm 1 kg - White.
Suggested parameters of printing with the felt
| Printing temperature | From 225 ° C to 245 ° C |
| Table temperature | From 50°C to 60°C |
| Print cooling | Optional |
There may be a noticeable swelling of the material coming out of the nozzle when loading the filament or during printing with it. However, this is a completely natural effect, which results from the surface tension of polymers included in the filament material. For better results, the manufacturer recommends setting a high fan power during printing and lowering the printing speed.
|
Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the felt
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the filament | +/- 0.05 mm |
| Colour | White |
| Material surface | High gloss |
| Material shrinkage | Very low |
| Printing temperature | From 225°C to 245°C |
| Table temperature | From 50°C to 60°C |
| Spool material | Silk |
| Spool diameter | 200 mm |
| Spool width | 70 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packaging | Yes |
| Roundness | +/- 0,02 mm |
| Packaging dimensions | 205 x 205 x 80 mm |
| Net weight | 1 kg |
Useful links |
