The Laboratories of the Future program is a project implemented by the Ministry of Education and Science in cooperation with the GovTech Center at the Chancellery of the Prime Minister. It aims to create a friendly and modern environment in primary schools, which will allow to carry out classes in an interesting way and to engage students in expanding and discovering new interests. The category includes 3D printers, soldering stations and microcontroller kits that are compatible with the equipment catalogue.
- New
Gravity - alcohol sensor 0-5ppm - I2C / UART - DFRobot SEN0376
Index: DFR-19016
- Reduced price
- Promotion
Converter VGA - DVI-D 24 + 1 pin with cable 15cm - Akyga AK-AD-50
Index: RCO-14908
- On sale!
- Promotion
Linear voltage regulator LDO 1,8V NCP1117DT18G - SMD TO-252 - 5pcs
Index: FAR-15251
- Reduced price
- Promotion
Laboratoria Przyszłości programme
Loading...
Apitor Robot X - educational robot building kit
Apitor Robot X set consists of 600 bricks which enable to build 12 different structures, designed for children aged 8+. Blocks included in the set are also compatible with...
Index: AKR-19703
Index: AKR-19703
3D printer - Flashforge Adventure 4
FDM 3D printer from the Adventurer product line, produced by Flashforge. The device has a fully closed working area with dimensions of 220 x 200 x 250 mm , which allows you to...
Index: FFO-19600
Index: FFO-19600
Soldering station 2in1 hotair and grotto ATTEN ST-8802 with fan in flask 800/65W
A device which combines the function of a soldering tip of 65 W with a hotair station of 800 W . The operating temperature of the soldering station is within the range...
Index: ATT-19409
Index: ATT-19409
Soldering station 2in1 hotair and grotto ATTEN AT-8586 with fan in flask 750W
Combination soldering tip 50 W with 700 W hot air station. The operating temperature of the soldering tip can be adjusted in the range from 150°C to 480°C. The maximum hot...
Index: ATT-19408
Index: ATT-19408
Filament Devil Design PLA 1,75mm 1kg - Violet
Filament in purple color with a diameter of 1,75 mm . PLA Films produced by Devil Design have properties that make them recommended to beginners in 3D printers. The product...
Index: DEV-18862
Index: DEV-18862
Try different colors of PLA filament - small set
Try different PLA colours - the small set is a product for fans of printing in many colours . It consists of 7 PLA filament reels with a diameter of 1.75 mm and different...
Index: ZES-18607
Index: ZES-18607
Abilix education mat for Krypton robots
Educational mat which complements the sets from the Krypton series. It contains elements allowing to get to know the operation of individual Krypton robot sensors in...
Index: AKR-16217
Index: AKR-16217
Filament Devil Design PLA 1,75mm 1kg - Dark Gray
Filament of Devil Design brand in dark grey with a diameter of 1.75 mm , net weight 1 kg . Vacuum-packed with the addition of a moisture absorber. Devil Design filters are...
Index: DEV-16059
Index: DEV-16059
3D printer - Flashforge Adventure 3
3D printer designed by Flashforge. It is designed to print three-dimensional models of dimensions up to 150 x 150 x 150 mm. It has a closed type housing , internal...
Index: FFO-15590
Index: FFO-15590
Filament Devil Design PLA 1,75mm - set of 6x0,33kg
Set of 6 filaments made of PLA material for 3D printers. The filament diameter is 1.75 mm, and the reel weight is 330 g.
Index: DEV-14434
Index: DEV-14434
Filament Devil Design PLA 1,75mm 1kg - Black
Filament Devil Design is made of PLA, used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg filament in Black color.
Index: DEV-14102
Index: DEV-14102
Filament Devil Design PLA 1,75mm 1kg - Galaxy Black
Filament Devil Design is made of PLA, used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg filament in Galaxy Black color.
Index: DEV-14101
Index: DEV-14101
Filament Devil Design PLA 1,75mm 1kg - Aluminum
Filament Devil Design is made of PLA, used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg filament in Aluminum color.
Index: DEV-14100
Index: DEV-14100
Filament Devil Design PLA 1,75mm 1kg - Bright Green
Bright orange filament for 3D printers and special printing pens. Made of easy to process PLA. Fully biodegradable . Obtained from renewable raw materials natural....
Index: DEV-14099
Index: DEV-14099
Filament Devil Design PLA 1,75mm 1kg - Navy Blue
PLA thermoplastic polyester filament . Colour navy blue. Used for FFF 3D printing and printing pens . PLA is a biodegradable material, made from renewable natural...
Index: DEV-14097
Index: DEV-14097
Filament Devil Design PLA 1,75mm 1kg - Super Blue
PLA Filament in super blue colour. Material with a diameter of 1,75mm, wound on spools containing 1kg of product. Inexpensive, easy to use filament for printing pens and 3D...
Index: DEV-14096
Index: DEV-14096
Filament Devil Design PLA 1,75mm 1kg - Gray
Filament Devil Design is made of PLA, used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg filament in Gray color.
Index: DEV-14094
Index: DEV-14094
Filament Devil Design PLA 1,75mm 1kg - Red
Filament Devil Design is made of PLA, used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg filament in Red color.
Index: DEV-14093
Index: DEV-14093
Filament Devil Design PLA 1,75mm 1kg - White
Filament Devil Design is made of PLA, used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg filament in White color.
Index: DEV-14090
Index: DEV-14090
Soldering stand ZD10D - handle with magnifying glass - Vorel 73500
Mounting handle with a magnifying glass 2.0 dioptres and two grippers. The product is perfect for working with small electronics, such as soldering or connecting...
Index: NSZ-00913
Index: NSZ-00913
Soldering tin Cynel 100g / 0.56mm
Soldering tin with flux with a diameter of 0.56 mm in spool with weight of 100 g.
Index: NSZ-00834
Index: NSZ-00834
Plastic brush with antistatic properties. It is safe to use it to clean electronics. Brush length is 22.5 cm and the bristles length is 8.8 cm
Index: NSZ-04774
Index: NSZ-04774
A device for removing tin excess. It has a metal case with a diameter of 20 mm, the length of the device is 190 mm.
Index: LUT-01575
Index: LUT-01575
Carbon filter for the AKS-153 fume absorber
Carbon filter designed for AKS-153 vapour absorber.
Index: LUT-06080
Index: LUT-06080