Soldering station Yihua 995D+ hotair with fan - 720W

Index: DLT-10680 EAN: 5908272000368

Tip-based soldering iron and hot air iron in one. The total capacity of the station is 720 watts. The device has a PID controller, LCD display, adjustable temperature and the tip-based iron with more heat power (50 to 100V). The air blow is realized through a fan located in the iron.

Soldering station Yihua 995D+ hotair with fan - 720W
€160.90
€130.81 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Yihua

Description

WEP 995D+ soldering station with hot air iron and soldering iron. The device is equipped with PID controller that checks the performance and adjusts it to the preset values.

 

Specification
  • Voltage: 220 - 240 V / 50 Hz (network)
  • Power: 720 W
  • The device has a PID controller
  • Compact design with clear LCD display
  • Automatic cooling when you put down the iron
  • Sleep function
  • Technology ESD Safe

 

  • Soldering Iron Hotair:
    • Adjustable temperature hot air from 100 - 480 °C
    • Temperature stability +/-1 °C
    • LCD display
    • Temperature setting buttons
    • Smooth adjustmentof temperature in the range
    • Air flow up to 120 l/min
    • Długość cable bulb: up to 90 cm
    • The air blow is realized through a fan located in the iron

 

  • Tip-based Soldering Iron
    • Adjustable temperature soldering tip: 200°Cto 480 °C
    • Temperature stability: +/- 1 °C
    • Soldering iron power: from 50 to 100 W
    • The resistance to ground of up to 2 Ohms
    • Potencjał relative to earth ground 2 mV
    • System: ESD safe
    • Mode sleep: activated after idle operation 0-99 minutes.
    • Iron: 907L

 

Includes:
  • Station Yihua 995D+
  • Hotair iron stand
  • Set of nozzles:
    • round with a diameter of 4.4 mm
    • round with a diameter of 8 mm
    • round with a diameter of 9 mm
    • square 12x12 mm
  • Stand for soldering iron along with a cleaning sponge
  • Soldering iron with T-I tip
  • A gripper for lifting circuits
  • Power cable
  • Manual

 

First run

  • You should not run the device immediately after delivery.
  • Equipment must remain for about 12 hours at room temperature before switching on.
  • All complaints caused by running of the equipment too soon will be denied.
  • You must completely remove the screw/screws from the bottom of the station if the compressor is the source of air supply. These screws are marked in red (1 or 3 screws depending on model).

 

Our range of accessories for soldering:
Voltage to 220 V AC
Voltage from 240 V AC
Voltage nominal 230 V AC
Nominal power 720 W
Temperature 200 - 480 °C
Solder - Fan yes
Solder - real temperature reading yes
Solder - Hotair yes
Solder - Type A/C digital
Package width 28.5 cm
Package height 17 cm
Package depth 20 cm
Package weight 3.14 kg

Be the first to ask a question about this product!

Product reviews

Soldering station  Yihua 995D+ hotair with fan - 720W

4.8/5

Average grade

3

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

Agata 13.03.2023 Confirmed purchase Translated review
A very decent device, I recommend it
Lubomir 12.02.2023 Confirmed purchase Translated review
The soldering station is a very useful assistant when working with SMD. The price/performance for use in the home workshop stands out here.....
Michal R. 14.06.2022 Confirmed purchase Translated review
Work fine

Customers who bought this product also bought:

Products from the same category: