List of products by brand DFRobot - Strona 24
DFRobot WT8266-S1 WiFi Module Based on ESP8266
Wi-fi module based on the chip ESP8266. It works in the wi-fi 802.11 b/g/n standard at 2.4 GHz. It is equipped with 18 pins - pitch of 2 mm, 9 of which are GPIO, 1 ADC and...- EOL
Ardublock KIT- set for graphical programming
The kit includes the base board DFRduino Uno with sensors and extensions that can be programmed graphically using the Ardublock environment via coloured blocks. Friendly and...- EOL
LattePanda Delta 432 - 4GB RAM + 32G eMMC Intel Celeron - Windows 10
Professional development board from LattePanda in Delta version allows to increase the efficiency of created projects. The device is equipped with Intel Celeron N4100...- EOL
DFRobot Accessory Shield for Arduino and Bluno
Shield designed specifically for modules Bluno (Arduino + BLE) containing an LCD display, potentiometer, relay, joystick with button, temperature and humidity sensor, LED RGB...- EOL
WiFiBee-MT7681 (Support Arduino WiFi Wireless Programming)
The XBee module which adds the wi-fi network's abilities to Arduino. It supports remote programming. It works in the IEEE 802.11 b/g/n 2.4 GHz standard. The system is...- EOL
DFRobot Gravity - ultraviolet light sensor UV - ML8511
Analog UV light sensor powered with the voltage of 5 V. The output is an analog voltage, proportional to the intensity of UV light. The sensor can be used to detect harmful...- EOL
DFRobot Interface Shield for Arduino
A shield which extends the capabilities of the Arduino. Interface shield supports several interfaces such as SPI, IIC, microSD, SD, TLC. Shield is compatible with the Arduino...- EOL
DFRobot IO Expansion Shield for Bluno M3
Shield for Bluno M3 that extends the capabilities of I/O pins. It has, i.a. led out digital pins from D0 to D38 with a pair of VCC and GND power, including 5 UART, SPI, I2C...- EOL
- EOL
DFRobot E-paper of 2.13" 212x104px - pad with tri-color display SPI for FireBeetle
Shield with e-paper 2.13" display with a resolution of 212 x 104 pixels. It communicates via the SPI interface with the FireBeetle. It displays 3 colors: black, white and red.- EOL
Bluno M3 STM32 ARM Cortex + BLE Bluetooth 4.0 - compatible with Arduino
Module from DFRobot is based on the STM32 with 32-bit ARM Cortex-M3 core (72 MHz, 512 KB of Flash, 64 KB of RAM). It has 39 digital inputs/outputs, 11 analog inputs and the...- EOL
Bluno Beetle - Shield for Bluno Beetle module
Board allows you to led the analog and digital pins of the module Bluno beetle on the standard compatible with DFRobot IO Expansion Shield. Supply voltage ranging from 5 V to 8...- EOL
DFRobot Gravity Expansion board for BBC micro: bit
Expansion board for Micro:bit modules with 6 3-pin connectors, knob for volume control, audio jack, ON / OFF switch and microUSB connector for power.- EOL
DFRobot Bluno M0 STM32 ARM Cortex M0 - compatible with Arduino
Module from DFRobot company, is built on the basis of the STM32 microcontroller with 32-bit ARM Cortex M0 core (72 MHz, 68 kB of Flash, 20 KB of RAM). It has 31 digital...- EOL
M1W AI+lOT Module - K210 Deep learning - WiFi with antenna - DFRobot DFR0637
AI M1W module equipped with K210 chip as a base unit. This chip has 64-bit dual-core processor with independent FPU, 8 MB built-in SRAM and 400 MHz clock frequency. M1W...- EOL
RLY-8-POE-USB - 8 relays 270V/10A - USB/Ethernet PoE driver
The controller with eight relays operating with voltages up to 277 V AC and current up to 10 A allows the control of devices supplied with mains voltage. The device is...- EOL
Gravity - UV light sensor VEML6075 - DFRobot SEN0303
Sensor based on Vishay chip VEML6075 detects the UV light band, both UVA and UVB with a resolution of 16-bit. The module converts the intensity of UV light to digital output....- EOL
DFRobot Bluetooth Audio Receiver and Playback Module (Bluetooth 4.0)
Audio receiver module equipped with Bluetooth 4.0, USB connector and a slot for microSD memory cards. Built-in connector allows you to connect headphones or speakers to 3 W....- EOL
DFRobot Audio - Shield for DFRduino M0
Audio shield for DFRduino M0 with processor of sound WM8978 Wolfson. It is equipped with the core transmitting a signal in the HI-FI standard, it supports 3D ambient sound and...- EOL
Ultrasonic distance sensor URM07 750cm - UART - with temperature correction
Ultrasonic sensor from the DFRobot working in the range of up to 7.5 m. It is powered with the voltage from 3.0 V to 5.5 V. The average supply current is 5 mA, and in the rest...- EOL
DFRobot OpenMV Cam H7 - Video inspection camera
OpenMV Cam is a small, microcontroller board which allows you to easily deploy applications using the mechanical view camera. It uses the STM32F765VI ARM Cortex M7 chip. It...- EOL
DFRobot Matrix LED RGB 64x64 - 4096 diodes - 3mm
The matrix consists of 4096 RGB LEDs 2121 arranged in 64 rows and 64 columns. For the module you need to use 16 pins of the microcontroller. The matrix can be connected in...- EOL
DFRduino M0 Mainboard connector xBee - compatible with Arduino
The DFRobot module compatible with Arduino Leonardo. It has 31 digital inputs/outputs, 6 analog inputs, as well as popular communication interfaces. The colored connectors...- EOL
DFRobot Gravity StarterKit - set of sensors for LattePanda
A set of sensors and modules for minicomputer LattePanda with the operating system Windows 10. It allows the construction of several projects, including: LEDs, weather sensor,...- EOL