- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Module from DFRobot company, is built on the basis of the STM32 microcontroller with 32-bit ARM Cortex M0 core (72 MHz, 68 kB of Flash, 20 KB of RAM). It has 31 digital inputs/outputs, 6 analog inputs, as well as popular communication interfaces. The colored connectors help you identify the leads.
|
The communication protocol was written in such a way that the device can be programmed using the Arduino IDE environment - details inthe user guide. |
Key features
- High-performance microcontroller STM32 with 32-bit ARM Cortex core, clocked at 72 MHz
- Has the Bluetooth Serial Port
- The distribution of leads is compatible with Arduino Leonardo
The plate contains the IIS interface supporting play & record wav files, and, due to the presence of theIIS chip, available is professional Hi-Fi sound.
|
Leads operate at a voltage of 5 V. |
DFRobot introduced colored connectors that facilitate the identification of the leads:
- red- power pins,
- blue - analog pins,
- green- digitalpins.
|
In order to start Bluno M0, it is necessary to connect the system to computer usingmicroUSB cableand install the Arduino IDE. |
Specification
- Recommended supply voltage: 7 V to 12 V
- Working voltage: 5 V
- The distribution of connectors is similar to the Arduino Leonardo
- Microcontroller:Nuvoton NUC123ZD4AN0 (Cortex M0)
- Clock frequency: 72 MHz
- SRAM: 20kB
- Flash memory: 68 k
- I/O ports: 31
- Number of analog inputs: 6
- SerialInterfaces: 2x UART, 1x SPI, I2C, USB, Bluetooth
- External interrupts: 31 lines
- Connector: micro USB slot, type B (USB cable not included)
- Dimensions: 68,5 x 53,4 mm
- Weight: 30 g
Useful links |
