- EOL
Attention! The product has been discontinued. Check other products in category. |
Description
The XBee module which adds the wi-fi network's abilities to Arduino. It supports remote programming. It works in the IEEE 802.11 b/g/n 2.4 GHz standard. It has 14 channels and also supports the most popular encryption methods and also the transmission of TCP/IP. It can work in Access Point mode or Station mode.
The system is suitable for standard XBee slot. In the case of the Arduino Uno and Mega, you can also remotely upload the program so there is no need to use USB cable. This is a useful feature for debugging robots or mobile applications.
Specification
- Microcontroller: MT7681
- Protocol: IEEE 802.11 b/g/n
- WiFi range: up to 180 m
- Number of channels: 14
- Operating frequency: 2.4 GHz to 2.4835 GHz
- The transmission power: from 15 dbm to 18 dbm
- Supported encryptions:
- WEP
- WPA-PSK
- WPA2-PSK
- TKIP
- AES
- Operation modes: AP, STA
- Port 1000 TCP: port of TCP-UART data
- Port 1001 TCP: port of AT commands
- Port 3333 UDP the broadcast port
- Working voltage: 3.3 V
- Recommended input voltage: 3.3 V
- Current consumption: 75 mA
- UART port: 1
- Built-in PCB antenna
- UART data transfer rate:
- 9600 b/s
- 14400 b/s
- 19200 bits/sec
- 38400 b/s
- 57600 b/s
- 115200 b/s (by default)
- Dimensions: 32 x 24 mm
- Weight: 3.5 g
Useful links |