- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Shield for Bluno M3 that extends the capabilities of I/O pins. It has, i.a. led out digital pins from D0 to D38 with a pair of VCC and GND power, including 5 UART, SPI, I2C interfaces, 8 PWM and 8 analog inputs as well as the possibility of turning on the voltage transducer of 3.3 V - 5 V.
In our offer you will find also boardBluno M3 with core ARM Cortex.
Specification
- The user has the option of switching the operating mode of the pins via jumper: 3.3 V or 5 V
- For each digital and analog pins, led out was a pair: GND and VCC
- A separate connector of UART, I2C and SPI interfaces,enable you to easily connect, for example,a reader of the memory card
- Led out RESET button allows to restart Bluno M3 at any time
- It has led out 39 GPIO pins with a pair of VCC and GND power
- Screw connector PWR allows to attach a power of any wire, e.g. ofservo
DFRobot IO Expansion Shield - the distribution of elements on the board.
Useful links |
