- New
- On sale!
- Promotion
- New
- New
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Motor drivers and servos - Strona 9
Loading...
DRV8256P - single-channel motor controller 48V/1,9A - Pololu 4039
A small, single channel DRV8256E motor driver created by Pololu. The module is powered from 4.5 V to 48 V. Continuous current per channel is 1.9 A (momentary up to 6.4 A...
Index: PLL-20440
Index: PLL-20440
DRV8256E - single-channel motor controller 48V/1,9A - Pololu 4038
A small, single-channel DC motor driver. The DRV8256E module developed by Pololu is powered from 4.5 V to 48 V . Continuous current per channel is 1.9 A (momentary up to...
Index: PLL-20441
Index: PLL-20441
Motoron M3S256 - 3 channel motor controller - 48V/2A - shield for Arduino - assembled - Pololu 5030
Three -channel motor driver for Motoron M3S256 manufactured by Pololu. The input voltage of the controller is in the range from 4.5 V to 48 V , the continuous current...
Index: PLL-21356
Index: PLL-21356
Three -channel motor driver for Motoron M3S256 from Pololu. The input voltage ranges from 4.5 V to 48 V with a continuous current consumption of up to 2 A , momentary (for...
Index: PLL-21358
Index: PLL-21358
The Motoron M3H256 from Pololu is a three-channel driver for DC motors in the form of an overlay for Raspberry Pi minicomputers, version B + and newer. The supply voltage of...
Index: PLL-21621
Index: PLL-21621
Motoron M3H256 Triple Motor Controller Kit for Raspberry Pi - soldered - Pololu 5034
The Motoron M3H256 is a three-channel driver for DC motors manufactured by the Pololu company. Input voltage for powering DC motors should be in the range from 4.5 V to 48 V...
Index: PLL-21623
Index: PLL-21623
The engine driver designed by Pololu is a module in the form of an overlay for Raspberry Pi minicomputers. The module has a 40-pin connector to which you can connect other...
Index: PLL-21979
Index: PLL-21979
The Motoron M2H24v14 motor driver is a module in the form of an overlay for Raspberry Pi minicomputers, designed by the Pololu company. The module is equipped with a...
Index: PLL-21980
Index: PLL-21980
Motoron M2H18v20 - a two-channel motor driver designed by Pololu in the form of an overlay for Raspberry Pi minicomputers. It is equipped with a 40-pin connector to which...
Index: PLL-21981
Index: PLL-21981
Two-channel Motoron M2H18v18 motor driver designed by Pololu in the form of an overlay for Raspberry Pi minicomputers. The module has a 40-pin connector to which you can...
Index: PLL-21982
Index: PLL-21982
The Motoron M2S24v16 from Pololu allows you to control two high-power DC motors powered by a voltage ranging from 6.5 V to 40 V , and the maximum continuous output current...
Index: PLL-21983
Index: PLL-21983
Two-channel driver for Motoron M2S18v20 DC motors created by the Pololu company. The driver input voltage is between 6.5V and 30V and the maximum continuous output current...
Index: PLL-21984
Index: PLL-21984
The Motoron M2S18v18 DC motor driver created by Pololu allows you to control two motors. The driver input voltage is between 6.5V and 30V and the maximum continuous output...
Index: PLL-21985
Index: PLL-21985
The Motoron M2S24v14 motor controller created by Pololu allows you to control two high-power DC motors. The driver input voltage is between 6.5V and 40V and the maximum...
Index: PLL-21986
Index: PLL-21986
DRV8434A stepper motor driver 48V/2A - Pololu 3764
Stepper motor driver module based on the DRV8434A chip from Texas Instruments. It allows you to control a motor with a maximum current consumption of up to 2 A per coil,...
Index: PLL-22217
Index: PLL-22217
DRV8434S stepper motor driver 48V/2A SPI with potentiometer - Pololu 3766
Stepper motor driver module based on the DRV8434S chip from Texas Instruments. It is powered with the voltage in the range from 4.5 V to 48 V. It offers a wide range of step...
Index: PLL-22218
Index: PLL-22218
M2T256 - two-channel motor controller 48V/1,8A - I2C interface - Pololu 5065
A driver based on the M2T256 system that allows you to control two DC motors using the I2C interface . The M2T256 can work with motors supplied with a voltage of 4.5 V to...
Index: PLL-22592
Index: PLL-22592
M1T256 - single-channel motor controller 48V/2,2A with connectors - I2C interface - Pololu 5060
A driver based on the M1T256 chip that allows you to control one DC motor using the I2C interface . The module can work with motors supplied with a voltage of 4.5 V to 48...
Index: PLL-22770
Index: PLL-22770
M1T256 - single-channel motor controller 48V/2,2A - I2C interface - Pololu 5061
A driver based on the M1T256 system that allows you to control one DC motor. It uses the I2C interface for communication. The module can work with motors supplied with a...
Index: PLL-22771
Index: PLL-22771
Stepper motor 28BYJ-48 5V / 0.1A / 0.03Nm with ULN2003 controller
Five wire stepper motor with driver on Darlington chip. It has an integrated 64:1 gear ratio, is powered by 5 V, and draws 100 mA current per coil. The holding torque...
Index: GRL-12807
Index: GRL-12807
See also
- Computer accessories
- Automobile accessories
- Cooling
- Diodes
- Sound and acoustics
- Mounting components
- Passive elements
- Wearables (e-textiles, smart clothes)
- Cameras and recorders
- Memory cards & disks
- Communication
- Converters
- Electronics courses
- Microcontrollers
- Animal repellers
- LED lighting
- Programmers
- Relays
- Voltage regulators
- Artificial intelligence
- Integrated circuits
- Displays and screens
- Tablets and smartphones
- Consoles
