Motoron M3S256 - 3 channel motor controller - 48V/2A - shield for Arduino - assembled - Pololu 5030

Index: PLL-21356
Three -channel motor driver for Motoron M3S256 manufactured by Pololu. The input voltage of the controller is in the range from 4.5 V to 48 V , the continuous current consumption is up to 2 A , and the instantaneous (for 1 second) up to 6.4 A. Motoron M3S256 shield designed for Arduino or a derivative board, such as A-Star 32U4 Prime. The subject of the sale is a fully assembled shield with connectors.
Motoron M3S256 - 3 channel motor controller - 48V/2A - shield for Arduino - assembled - Pololu 5030
€48.90
€39.76 tax excl.
Waiting time: 4-6 weeks
Only on request
PayPal payment
Manufacturer: Pololu
Compatibility: Arduino

Product description: Motoron M3S256 - three-channel motor driver - 48 V / 2 A - Arduino shield - assembled - Pololu 5030

Three -channel motor driver for Motoron M3S256 manufactured by Pololu. The input voltage of the controller is in the range from 4.5 V to 48 V , the continuous current consumption is up to 2 A , and the instantaneous (for 1 second) up to 6.4 A. Motoron M3S256 shield designed for Arduino or a derivative board, such as A-Star 32U4 Prime . The subject of the sale is a fully assembled shield with connectors.

The product is compatible with Arduino!

Before starting work, also check the user's guide prepared by the manufacturer.

Motoron M3S256 - three-channel motor driver - 48 V / 2 A - shield for Arduino - assembled - Pololu 5030.

Motoron M3S256 - three-channel motor driver - 48 V / 2 A - shield for Arduino - assembled - Pololu 5030.

How to connect the controller with the engine? - Motoron M3S256 driver connection diagram.

How to connect the controller with the engine? - Motoron M3S256 driver connection diagram.

Special features of the Motoron M3S256 controller

  • Equipped with a Motoron M3S256 driver system, which allows you to control up to three motors at a time
  • Performs optional cyclic redundancy checking (CRC)
  • It has a command timeout feature that stops the motors from running if the Arduino stops working
  • It has a built-in thermal cut-off circuit
  • It contains filter capacitors located on both power lines
  • Provides protection against motor reverse current

The subject of the sale is a fully assembled Motoron M3S256 engine controller. In our offer you will also find a version with connectors for self-assembly and a version without connectors .

Motoron M3S256 driver specification

  • Number of channels: 3
  • Input voltage: 4.5 V to 48 V
  • Logic supply voltage: 2.8 V to 5.5 V
  • Continuous output current: 2 A per channel
  • Maximum instantaneous current per channel: 6.4 A peak for 1 second
  • Communication interface: I2C
  • Maximum I2C frequency: up to 400 kHz
  • Configurable traffic parameters:
    • Maximum acceleration / deceleration forward / reverse
    • Initial speed forward / reverse
    • Forward / Reverse direction change delay
  • Maximum PWM frequency: configurable - eight options available from 1kHz to 80kHz
  • Configurable automatic error response
  • Measurement of engine supply voltage (VIN)
  • Two LEDs indicating the operating status of the controller

Kit contents

  • Motoron M3S256 - three-channel motor driver - 48 V / 2 A - Arduino shield - assembled - Pololu 5030
The location of the pins of the Motoron M3S256 driver.

The location of the pins of the Motoron M3S256 driver.

Voltage to 4.5 V
Voltage from 48.0 V
Current 2 A
Channels 3
Package width 9.3 cm
Package height 8.7 cm
Package depth 3.6 cm
Package weight 0.039 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: