Electric case 2pin 10A/250V in case with strain relief boots
Index: KAB-08074
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
- On sale!
- Promotion
List of products by brand Pololu - Strona 2
Loading...
Step-Down Voltage Converter D36V28F3 - 3,3V 3,6A - Pololu 3781
A step-down converter with a 3.3 V output voltage and current capacity from 3.2 A to 4.5 A (typical 3.6 A). The supported input voltage is 4.5 V to 50 V. Module dimensions...
Index: PLL-17168
Index: PLL-17168
Step-Up Voltage Regulator U1V11F3 - 3,3V 1,2A - Pololu 2561
A step-up converter with a 3.3 V output voltage. Maximum input current up to 1.2 A. Supply voltage in the range 0.5 V - 5.5 V. The system has a standby mode.
Index: PLL-01894
Index: PLL-01894
Vibration Motor 11,6x4,6x4,8mm - Pololu 2265
Vibration motor with displaced mass placed on the shaft. It draws approximately 60 mA of current with a 3 V supply.
Index: PLL-02037
Index: PLL-02037
19:1 Metal Gearmotor 12V 37Dx68Lmm with 64 CPR Encoder - Pololu 4751
Polol's engine with 19:1 gearbox generates 530 rpm, torque is 8 kg*cm. The motor is powered by 12 V and the average current consumption is about 200 mA. The motor is...
Index: PLL-16116
Index: PLL-16116
DC Motor Dagu DG02S-L with 48:1 Gear 4,5V - angular with double sided extended shaft - 2pcs.
Angle motor with 48:1 gearbox. Plastic double-shaft gearbox rotates up to approx. 90 rpm, torque is 0.8 kg*cm (0.078 Nm). Powered by 4.5 V, it consumes an average of 190 mA of...
Index: DGU-02487
Index: DGU-02487
- On sale!
MAX14870 - single-channel motor controller 36V/1.7A - Pololu 2961
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 2.5 A). Supply voltage from 4.5 V to 36 V.
Index: PLL-04200
Index: PLL-04200
TB67H420FTG Dual/Single Motor Driver Carrier - Pololu 2997
Single channel DC motor controller. Continuous current per channel 2.6 A (momentary up to 5 A). Supply voltage from 4.5 V to 28 V .
Index: PLL-12059
Index: PLL-12059
Vibration Motor 10 x 3,4 mm - Pololu 1636
Small motor generating vibrations of 0.75g amplitude. It consumes about 60mA of current when powered by 3 V.
Index: PLL-00589
Index: PLL-00589
Step-Down Voltage Regulator D24V6F12 - 12V 0,6A - Pololu 2109
Step-down converter with 12 V output voltage. Maximum current up to 600 mA. Supply voltage in the range 14 V - 42 V.
Index: PLL-01347
Index: PLL-01347
Magnetic Encoder Pair Kit for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V - Pololu 3499
A pair of magnetic quadrature sensors, designed for installation in 20D motors from Pololu. It consists of a board with the Hall sensor and the plastic impeller with magnets,...
Index: PLL-08258
Index: PLL-08258
Mini switch Push MOSFET SV 4,5-40V/4A - with protection before reverse current - Pololu 2809
Pushbutton module as an alternative to mechanical buttons. The switch is bistable, one press turns the power on and another press turns it off. Additional inputs enable e.g....
Index: PLL-04854
Index: PLL-04854
Step-Down Voltage Regulator D24V22F7 - 7,5V 2,4A - Pololu 2860
Step-down converter with 7.5 V output voltage. The maximum current is 2.4 A. The supply voltage is in the wide range from 8 V to 36 V. The module dimensions are 18 x 18 mm.
Index: PLL-04980
Index: PLL-04980
- Reduced price
- Promotion
42x19mm Wheels - 2pcs. - Pololu 1090
The set includes a pair of Pololu wheels (2 pieces) in the size 42 x 19 mm.
Index: PLL-00521
Index: PLL-00521
Ball Caster 3/8'' - plastic - Pololu 950
Lightweight plastic ball in the bowl with a diameter of 3/8 inches, it is used to support the front of the two-wheeled robot.
Index: PLL-00030
Index: PLL-00030
Stepper Motor SY28STH45-0674A 200 steps 4,5V / 0,67A / 0,095Nm - Pololu 1206
Bipolar stepper motor 200 steps (1.8 °) 4.5 V with 670 mA current per coil, 0.95 kg*cm (0.095 Nm) torque. Dimensions: 28 x 28 x 45 mm (NEMA 11).
Index: PLL-00469
Index: PLL-00469
Force sensor FSR-406 - 2kg square 38mm - Pololu 1645
Force sensor changes its resistance when the force applied to the square tip, increases. The sensor in the form of a rectangle with side of 38 mm.
Index: PLL-01040
Index: PLL-01040
90x10mm Wheels - black - Pololu 1435
Set of plastic wheels (2 PCs.) with rubber tyres, providing a high adhesion. They are suitable for engines with Pololu gears.
Index: PLL-00454
Index: PLL-00454
RC Switch with MOSFET 30V/15A transistor - Pololu 2803
The module processes the RC signals to a digital on/off statuses. It has a built-in MOSFET transistor which allows for the control of devices with current consumption of up to...
Index: PLL-01931
Index: PLL-01931
Step-Up Voltage Regulator U3V70F5 - 5V 10A - Pololu 2891
Step-up converter with 5 V output voltage. Maximum current up to 10 A. Supply voltage between 2.9 V and 5 V.
Index: PLL-14003
Index: PLL-14003
Solarbotics RW2i Wheel - internal mount - Pololu 1127
Wheel with tyre for high grip. Ideal for minisumo robots and linefollowers. Dimensions: 31,2 x 13,2 mm
Index: PLL-00024
Index: PLL-00024
Step-Down Voltage Regulator D24V10F12 - 12V 1A - Pololu 2834
A step-down pulse inverter module with an efficiency of 80 % - 93 %. Converts the input voltage from 12.1 V to 36 V to a 12 V output value. The maximum continuous current is 1 A.
Index: PLL-03022
Index: PLL-03022
30:1Metal Gearmotor 12V 37Dx68Lmm with 64 CPR Encoder - Pololu 4752
Polol's engine with a 30:1 gearbox generates 330 rpm, torque is 14 kg*cm. The motor is powered by 12 V and the average current consumption is about 200 mA. The motor is...
Index: PLL-16115
Index: PLL-16115
Romi - Magnetic Encoders set for Romi Chassis - 2 pieces - Pololu 3542
A pair of magnetic quadrature sensors, designed for mounting on Romi Chassis. Consists of a plate with the Hall sensor and the plastic rotor with magnets, a set of makes up...
Index: PLL-07350
Index: PLL-07350
Ball Caster 3/4" - plastic - Pololu 2691
Lightweight plastic ball in the bowl with a diameter of 1 inch, it is ideal to use to support the front of the two-wheeled robot.
Index: PLL-04650
Index: PLL-04650
