Grove modules - Strona 8
Grove - Lightning Sensor - AS3935 - Seeedstudio 101021072
The Grove AS3935 sensor is an advanced, easy-to-use sensor that can detect both cloud-to-ground and intra-cloud lightning , up to a 40 km radius. It communicates via the...- New
Grove - StarterKit v3 - IoT starter package for Arduino
Starter set introducing the world of IoT (Internet of Things) for Arduino boards. The set includes i.a.: sensors of light, touch, temperature, servo, display and many others....Arduino MKR Connector Carrier ASX00007 - shield for Arduino MKR
Module for Arduino from the MKR that extends the capabilities of I/O pins. It is designed for modules and sensors from the Grove series. It has 4-pin connectors, works with...Grove - set of 5 female-female 4-pin - 2mm/50cm with latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. The length of the cable is 50 cm. Version with a latch.Grove - 125kHz RFID reader with antenna - Seeedstudio 113020002
Easy to use module of RFID reader with UART and Wiegand interface. Works with UEM4100 RFID modules. The kit includes antenna which allows you to communicate in a range up to 7...Grove - LCD display 2x16 characters with backlight (White on Blue)
Monochrome 2 x 16 character LCD display with high brightness backlight from Grove. The module communicates with the control board via the two-row I2C bus. The screen is powered...Grove - ProtoShield - prototype board
Prototype board Grove with a soldered socket. It allows for an easy access to four lines of a standard Grove-S0, S1, VCC and GND series connection cable. The layout of the...Grove - a set of 5 female-female 4-pin - 20cm cables
A set of five 4-pin Grove cables. They are used to connect M5Stack series developer modules with caps and Unit modules. The cable has 4 lines: two for data...Grove - push button with backlight - red
Module from the Grove is equipped with a button with a yellow led. It is powered with the voltage from 3.3 V to 5 V. It has the Grove connector that allows for the direct...Grove Shield for Raspberry Pi Pico - Seeedstudio 103100142
Grove frontend for Raspberry Pi Pico module . Converts Pico GPIO connectors to Grove type connectors such as I2C, UART and digital and analog ports. It allows you to...Grove - TSL2561 - digital I2C ambient light sensor
Module from Grove with a digital sensor measuring the light intensity of the environment. It has a linear spectral response in the visible light range to the human eye. The...Grove - RGB LED strip WS2813 - digital, addressed - IP65 30LED/m, 9W/m, 5V - 1m
RGB LED bar with Grove connector is equipped with digital, individually addressed WS2813 diodes in density of 30 pcs. per meter. The diodes have been sealed with a layer of...Grove - RGB LED v2.0 - module with RGB diode
Module with RGB diode from Grove. It a llows you to control RGB diode using the digital pins of the microcontroller, and simultaneous connection of even 1024 modules using...Grove - 12-bit Magnetic Rotary Position Sensor / Encoder (AS5600)
The module is equipped with AS5600 magnetic encoder with 12-bit resolution. It has greater accuracy, is non-contact and has no angle limitation, unlike a traditional...Grove - 6-axis accelerometer and gyroscope LSM6DS3 - Seeedstudio 105020012
The module is equipped with a 6-axis accelerometer and a gyroscope based on the LSM6DS3 system with a built-in power regulator. It allows to measure 6 sizes: acceleration X,...Grove - Base Hat for Raspberry Pi Zero - shield for Raspberry Pi Zero
Overlay for Raspberry Pi Zero / Zero W based STM32 microcontroller with 12-bit ADC, with Grove connectors, allows to connect sensors and modules from Grove series communicating...Grove - set of 5 female-female 4-pin - 2mm / 40cm with latch
A set containing five 4-pin Grove cables with a clip, 40 cm long. The cables are used to connect the sensors to the Grove connector with the base cover.Grove - Sensor for measuring EMG muscle activity
Module from the Grove series that allows you to collect the bioelectric signal generated by the human muscles (EMG). The output is an analog signal that can be read using any...Grove AC-Voltage sensor - RMS AC voltage sensor - MCP6002 - Seeedstudio 101991032
The sensor is equipped with the MCP6002 system and is designed to measure the rms value of AC voltage . It has adjustable gain for various voltage inputs from 120 V to...Grove - radio transmitter + 433MHz receiver module
Set from Grove including the transmitter and receiver that communicate with each other at a frequency of 433 MHz . It works with voltage of 5 V. Supports the ASK modulation....See also
- QR readers
- Piezoelectric sensors
- Optical sensors
- Oxygen sensors
- Resistance sensors
- Door sensors
- Nfc readers
- Inductive sensors
- RPM sensors
- Led motion detectors
- Tilt sensors
- Accelerometers
- Twilight sensors
- Wifi temperature sensors
- Hall effect sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Limit switches
- Sensors of light and color
- Gas sensors
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Gravity modules