Extremely easy to use,ready to use right after taking it out of the box,the robot's shoulder withload capacity up to 0.5 kg. The device can be controlled, in particular, from the USB portor wirelessly, usingwi-fi or Bluetooth, for example, usingsmartphone apps. Through the simple mechanism of replacing tips, the robot can perform many functions, for example,drawing, engraving with a laser,ormoving objects.
See also other movies showing the robot doing:
The contents of the set
|1||The shoulder of the robot||x||x|
|5||Kit for 3D printing||x||x||x|
|6||The Bluetooth Module||x||x|
|7||Tip with laser||x||x|
Shoulder Dobot Magician can be controlled in various ways. The manufacturer has equipped the device, in particular in:
- Bluetooth- for wireless communication, such as a phone or other BT module.
- The wi-fi moduleallows you to communicate via the Internet.
- USB portfor connection with a computer for programming movements, for example, in the form of blocks or in C, C++, C#, Python, or Java using a specialized API.
- The joystickprovides manual control of mechanical shoulder.
- The manufacturer also claims the ability to control usingvoice commands, or even brain waves, in case of creating appropriate software with the use of additional modules.
The function of Handhold teaching
You can register the moves and then repeat them over the shoulder Dobot. This function allows to control in a very simple and quick way.
Thanks to the use of a simple mechanism, instruments installed on the end of the robot can be very easily changed. The shoulder can be a 3D printer and after a whille it can draw pictures with a marker or cut openings using a laser.Check what tools you will find in the kit!
Dobot Studio allows you to monitor, configure and change the settings of the shoulder without creating any code.
The function of drawing and engraving
Dobot Magician can create images with a pen on paper. It supports file formats: BMP, SVG, DXF, works with an accuracy of 0.2 mm. Tip can be changed to the laser, then the robot will gain the opportunity of engraving, e.g. in wood or leather.
The shoulder has 13 additional ports for connection of modules, for example, speech recognition, buttons, or analog sensor. One programmable button, and an integrated 2 MB of memory for commands that makes the using robot is very convenient.
USB communication programming
The USB port provides communication via serial interface with the environment for developers of the Blocky Robot. The user may also create software in C++, C#, Java or Python.
|Number of axes||4|
|Load capacity||500 g|
|Maximum reach||320 mm|
|Positioning accuracy||+/- 0.1 mm|
USB (USB TO UART)
|Power supply (included)||
from 100 V to 240 V
V 50 / 60 Hz
|Robot's power supply||
12 IN THE POST. DC / 7 A
to 60 In
from 10 °C to 60 °C
|The movement of axis|
with load up to 250 g
|1. Base rotation||from -135 ° to 135 °||320 °/sec|
|2. The rear part of the shoulder||from 0 ° to 85 °||320 °/sec|
|3. The front part of the shoulder||from 10 ° to 95 °||320 °/sec|
|4. Twist of the fixture||from +90 ° to -90 °||
|The dimensions of the base||158 x 158 mm|
|Materials||Aluminum 6061, ABS plastic|
|Mount||for putting on a table, countertop|
|Case dimensions||307 x 224 x 330 mm|
DobotStudio, Repetier Host
GrblController3.6, Graphic programming
|Creatin the software||
USB Communication protocol - UART
Libraries of DOBOT
|Interfaces of I/O expansion||
10 x I/O with function of PWM and analog input
4 x power supply output 12 V
Size: 150 x 150 x 150 mm
Resolution: 0.1 mm
Power: 500 MW
Type: 405 nm (blue)
Power Supply: 12 V
|Marker's handle||The marker's diameter: 10 mm|
Diameter: 20 mm
Pressure: -30 kPa
Range: 40 mm
Force: 8 N
Dobot at the Volkswagen factory
The following parts of the robot have a 6-month warranty:
The warranty does not cover:
- The shoulder of the robot
- Pneumatic holder
- Holder with suction pump
- A drawing kit with a marker
- Kit for 3D printing
- The Bluetooth Module
- Wi-Fi Module
- Tip with laser