• EOL

Power supply EA1018A 12V/1,5A - DC plug 5,5/2,5mm

Index: WAK-13633

Stabilized mains power supply. Supply voltage: 100 V to 240 V. Output Voltage: 12 VDC. Output current: 24 W 1.2 A. [ A. Connector: DC plug 5,5 / 2,5 m (compatible with 5.5 / 2.1 mm).

Power supply EA1018A 12V/1,5A - DC plug 5,5/2,5mm
€1.90
€1.54 tax excl.
Product was replaced by other
Manufacturer: OEM

Attention!

The product has been discontinued. Check other products incategory.

Description

Stabilized mains power supply. Supply voltage: 100 V to 240 V. Output Voltage: 12 VDC. Output current: 18W. Connector: DC plug 5,5 / 2,5 m (compatible with 5.5 / 2.1 mm).

Specification

  • Supply voltage: 100 to 240 VAC
  • Output voltage: 12 V DC
  • Output current: 1,5 A
  • Supply frequency: 47~63 Hz
  • Change of the output voltage depending on supply voltage: 1% MAX
  • Change of the output voltage depending on load: ± 5%
  • Ripple and noise: 1% MAX
  • Efficiency: 79%
  • Over voltage protection: YES
  • Short-circuit protection: YES
  • Operating temperature: 0~40°C
  • Storage temperature: -20~85°C
  • Connector: DC plug 5,5 / 2,5 mm (compatible with 5.5 / 2.1 mm)
  • Stabilized power supply, power supply
  • IP rating: internal
  • Cable length: approx. 150 cm
  • Protection class: Class II
  • Safety standards: EN60950-1, IEC60950-1
  • Safety / EMC: TUV, PSB, CE
  • MTBF: 30000 hours
  • Indicator: NO
  • Dimensions (l x W x h): 40 x 75 x 55 mm
  • Weight: 180g
  • It can power, for example,Arduino board
Cable - type supply
Cable length 1.5 m
Voltage output from 12.0 V
Output voltage to 12.0 V
Nominal output voltage 12.0 V
Nominal power 18 W
Current 1.5 A
Power supply - type typical plug-in
Power supply - Plug 5.5 / 2.5 mm
Package width 15 cm
Package height 3.2 cm
Package depth 17 cm
Package weight 0.12 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: