- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
ROBOTS AND MECHANICS - Strona 35
Loading...
Micro motor N20-BT01 75:1 220RPM - 6V
N20 series miniature motor with 75:1 gearing, has 220 RPM , torque is 0.8 kg*cm (0.078 Nm). The supply voltage is from 1 V to 6 V.
Index: DNG-12541
Index: DNG-12541
Aluminum Side Servo Mount Feetech FK-SB-001
Aluminum side mounting designed for SCS09, SCS15, FR0109M, FR0115M servos . It is used to connect the sides of the servos.
Index: FTC-09200
Index: FTC-09200
Aluminum servo mount Feetech FK-YS-001
Aluminum servo mount made by a company Feetech, with length of 6.3 cm Work in particular with standard servos.
Index: FTC-09209
Index: FTC-09209
Linear Actuator LA10P 500N 13mm/s 12V with potentiometer - stroke 5cm
Linear actuator powered by 12 V with potentiometer . The maximum extension is 5 cm and the permitted load capacity is 50 kg (500 N) . The actuator has an IP65 rating to...
Index: WLS-17098
Index: WLS-17098
Aluminum servo horn Feetech FK-AP-2 - 30mm / 6mm
Aluminium servo horn made by company Feetech, length of 3 cm and a diameter of the mounting hole is 6 mm. It comes in blue color. Working with standard servos.
Index: FTC-09183
Index: FTC-09183
Aluminum servo horn Feetech FK-AP-8 - 95mm / 6mm
Aluminium servo horn made by company Feetech, length of 9.5 cm and a diameter of the mounting hole is 6 mm. There are two screws for adjustment. It works with standard...
Index: FTC-09189
Index: FTC-09189
Stepper Motor JK42HS40-1206 200 steps 3,6V/1,2A/0,27Nm
Unipolar stepper motor , six-wire. Has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 3.6 V, draws 1200 mA per coil. Torque is 2.8 kg*cm (0.27 Nm)....
Index: MOT-03611
Index: MOT-03611
DFRobot Baron 4WD - Rectangular Chassis 4WD with DC Motor Drive
Platform with four-wheel drive is made of durable aluminum. It can climb and overcome obstacles. The set also includes 4 DC motors with encoders that can be controlled using...
Index: DFR-05967
Index: DFR-05967
DFRobot Gravity - DC motor + propeller module
Module with DC motor and built-in transistor, it does not require an additional driver. Control is via PWM signal. It has a connector adapted to DFRobot IO Expansion Shield.
Index: DFR-05965
Index: DFR-05965
HPCB Motor with 30:1 Gear - doublesided shaft - Pololu 3072
Polol' s miniature high power engine with durable carbon brushes. It has a 30:1 transmission, speed is 1000 rpm , torque is 0.45 kg*cm (0.044 Nm). It has an extended...
Index: PLL-05092
Index: PLL-05092
DC Motor with Gear 6V 210RPM + encoder
Motor with 34:1 gearing , 210 rpm, 10.0 kg*cm (0.9 Nm) torque. DC current is 3.2 A. The device has a quadrature encoder with a resolution of 11 pulses per revolution (after...
Index: DFR-09531
Index: DFR-09531
Set of 20 pieces of shafts with the length of 20 mm and a diameter of 3 mm.
Index: GRL-12519
Index: GRL-12519
Hexagonal Wheel Adapter - 12mm/3mm - 2pcs. - Pololu 2682
Aluminum adapter converting the 12 mm, hexagonal shaft suitable for different wheels, for 3 mm motor's shaft. The length of the adapter is equal to 17 mm.
Index: PLL-06091
Index: PLL-06091
DC Motor Dagu DG02S-L with 48:1 Gear 4,5V - angular with double sided extended shaft - 2pcs.
Angle motor with 48:1 gearbox. Plastic double-shaft gearbox rotates up to approx. 90 rpm, torque is 0.8 kg*cm (0.078 Nm). Powered by 4.5 V, it consumes an average of 190 mA of...
Index: DGU-02487
Index: DGU-02487
19:1 Metal Gearmotor 12V 37Dx68Lmm with 64 CPR Encoder - Pololu 4751
Polol's engine with 19:1 gearbox generates 530 rpm, torque is 8 kg*cm. The motor is powered by 12 V and the average current consumption is about 200 mA. The motor is...
Index: PLL-16116
Index: PLL-16116
HP Motor with 75:1 Gear - Pololu 2361
A miniature high-power motor by Pololu with a gearbox of 75: 1, has 400 rpm, the torque is 1.6 kg * cm (0.156 Nm).
Index: PLL-00722
Index: PLL-00722
NEMA 34 - L-type Step Motor Mount - 86x86mm
NEMA 34 standard stepper motor mount . The mount has universal mounting holes for most NEMA 34 standard motors. Mounting screws will be required for motor mounting , which...
Index: GRL-16953
Index: GRL-16953
Index: NSZ-08084
Metal Spacers Delock M2,5 10mm + screws for Raspberry Pi - 4 pieces
Metal spacers with a length of 10 mm, designed for installation of extension boards for Raspberry Pi. Elements of this type are based on the screw, allow to keep the same...
Index: RPI-08115
Index: RPI-08115
Dagu motor gear with 75:1 6V 133RPM
Motor with 75:1 metal gearbox providing 12 kg*cm (1.1 Nm) of torque. The supply voltage is 6 volts and the speed is 133 rpm.
Index: DGU-09406
Index: DGU-09406
Micro motor N20-BT24 50:1 625RPM - 9V
The N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is equal to 1.1 kg*cm (0.107 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12566
Index: DNG-12566
25Dx48L Motor with 227:1 Gear 12V 33RPM - Pololu 3233
Polol's engine with a 227:1 transmission generates 33 rpm , torque is 23 kg*cm (2.25 Nm). The motor is supplied with 12V at an average current consumption of 200mA without...
Index: PLL-16382
Index: PLL-16382
Stepper Motor JK35HY26-0284 200 steps 7,4V/0,6A/0,06Nm
Bipolar stepper motor, four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 7.4 V, draws 600 mA per coil. Torque is 0.65 kg*cm (0.064 Nm)....
Index: MOT-04849
Index: MOT-04849
Mini Vibration Motor MT63 1,5 V
Small metal vibrating motor powered by 1.5 V. Idle current 180 mA. Dimensions: 17 x 10 x 12 mm.
Index: MOT-04725
Index: MOT-04725