- New
ROBOTS AND MECHANICS - Strona 36
Metal robot Chassis 4WD four-wheeled with DC motors - rectangular
Metal, universal platform, allowing you to build a robot, for example, to track a line (line follower) or fighting (sumo). For control, you can use any controller, including...DC Motor Dagu DG01D with 120:1 Gear 4,5V - double sided shaft - 2pcs.
Plastic motor with 120:1 gearbox. Dual shaft turns at up to approx. 60 rpm, torque is 0.8 kg*cm (0.078 Nm). Powered by 4.5 V, it draws an average of 190 mA of current (max 250...Servo Feetech FS5103B - standard
Standard servo. The power voltage from 4.8 V to 6 V. Speed: 0.16 s/60°. Torque: 3.2 kg*cm Dimensions: 40.8 x to 20.1 x 38.0 mm Weight: 36 gMicro Pan/Tilt Servo Bracket with Camera Mount - plastic
Plastic handle that allows you to create a platform for control in two axes by using the micro servo. A kit for self-assembly allows to build, for example, the rotating stand...Wheel with tire 65x26mm - yellow
Wheel with 65 mm diameter tyre, tyre width is 26 mm. Compatible with bevelled shaft motors on both sides.Stepper Motor JK42HS34-0404 200 steps/pr 12V/0,4A/0,25Nm
A bipolar stepper motor, four wired. It has a resolution of 200 steps per rotation (1.8 degree). It is powered with a voltage of 12.0 V, consumes a current of 400 mA per coil....Electric liquid pump 130l/h 12V
Electric pump for liquids in black. It has a 1.6 m long cable and a DC socket 5.5 x 2.1 mm. The pump dimensions are small: 35 x 35 x 35 mm. It is designed for pumping out water...Telescopic Magnetic Gripper - 60cm
Telescopic magnetic gripper with adjustable length from 13,5 cm to 60 cm. It improves the extraction of small metal parts from hard to reach places. Sent in blue color.Micro Pan/Tilt Servo Bracket - SparkFun ROB-10335
Metal bracket enables creating platforms, controlled by servos. A kit for self-assembly allows to build, for example, rotating camera stand for face tracking.Electric liquid pump AD20P-1230E - 12V 240l/h
Mini submersible pump model AD20P-1230E in black, with the possibility of liquid flow up to 240 l/h. Its operating voltage is 12 V and current consumption is 300 mA. It has a...- EOL
Magnetic Pad for Screws 90x145mm
The magnetic washer on the screws. On the mat the lines have been drawn which allow to mark the place from which the screw was screwed out. Dimensions: 90 x 145 mmElectrical Actuator Super Power Jack 2000N 7,5mm/s 12V - 44cm stroke
The electric actuator powered with voltage of 12 V. The device has a load of 2000 N (200 kg), runs at a speed of 7.5 mm/sec. Maximum current consumption is 4.2 A. The encoder...Stepper Motor JK42HS40-0504 200 steps/rotations 12V/0,5A/0,43Nm
A bipolar stepper motor, four wired. Has a resolution of 200 steps per rotation (1.8 degree). It is powered with a voltage of 12.0 V, consumes 500 mA per coil. Torque is 4.4 k...Servo Feetech FS90R - micro - continuous work 360 degrees
Feetech FS90R v2 micro servo. Operates as a variable speed motor. Powered from 4.8 V. Speed: 0.07 s/60°. Torque: 1.5 kg*cm. Dimensions: 30.5 x 12 x 22 mm....Stepper motor 28BYJ-48 5V / 0.1A / 0.03Nm with ULN2003 controller
Five wire stepper motor with driver on Darlington chip. It has an integrated 64:1 gear ratio, is powered by 5 V, and draws 100 mA current per coil. The holding torque...Servo TowerPro SG-90 - micro - 180 degrees
Servo type micro. Speed: 0.1 sec/60 ° . Torque: 1.8 kg*cm Dimensions: 22 x 12 x 27 mm. Weight: 9 g.Mini Vibration Motor 10x2,7mm - 3V
Mini vibration motor powered by 3 V . Idle current consumption is 80 mA . The motor is 10 mm in diameter and 2.7 mm high. The module has two cables which are removed from...