- Coming soon
Over 500,000 customers already trust us. With us you get:
same-day shipping for products marked “24h shipping”
our own service centre in Poland
30 days to return and free delivery in Poland from PLN 500
4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)
VAT invoice, leasing and instalments for businesses
For businesses
individual quote for larger quantities
VAT invoice
For schools and universities
orders based on requests for quotation
help with choosing kits for your lab
5-Toolhead Upgrade Kit for Original Prusa XL 3D Printer with 2 Toolheads - DIY Assembly
Upgrade kit for the Original Prusa XL printer from 2 to 5 toolheads with an electronics extension.
- Three Nextruder toolheads with 0.4 mm nozzles and spool holders included
- XLSplitter board and an extra power supply for the upgraded printer
- Up to five filaments in one print after assembly and calibration
Five toolheads in the Original Prusa XL printer
The 5-toolhead upgrade kit is a package of parts for the Original Prusa XL printer with 2 toolheads. Once you install the Prusa Research kit, you have a printer with 5 Nextruder toolheads. In the box you will find three new toolheads with 0.4 mm nozzles, and for each of them a filament spool holder and a silicone heater block sock.
You also get an electronics expansion with an XLSplitter board and an additional power supply, as well as two 0.4 mm replacement nozzles for the existing toolheads. This lets you combine up to five filaments of different materials and colors in a single print.

Electronics extension with an extra power supply and the XLSplitter board
5
printing toolheads in the Original Prusa XL after the upgrade
3
new Nextruder toolheads with a 0.4 mm nozzle and a spool holder
1
extra power supply in the electronics extension
6.2.4
minimum printer firmware version

Botland is a reseller of Prusa 3D printers in Poland. Buying from us means original equipment from a warehouse inside the country and fast technical support. We also offer a professional service in Poland and original spare parts.
Is it the right choice for you?
A good choice if:
- You have an Original Prusa XL with 2 toolheads and want to have 5 toolheads
- You print models from several materials or in several colors at once
- You want to reduce filament waste in multi-material prints
Consider another option if:
- You have an Original Prusa XL with 1 toolhead: 2-toolhead upgrade kit
- You want to buy an XL with five toolheads: Original Prusa XL with 5 toolheads
Did you know
Silver fans in the new toolheads
Since January 2026, Prusa Research has been shipping toolheads with a silver print fan instead of a black one, so after the upgrade both types may work in your printer. Before calibration, check the fan color on each toolhead and set its type in the printer menu separately for each tool, as the manual recommends.
Frequently asked questions
Which printer does this upgrade kit fit?
It fits the Original Prusa XL printer with 2 toolheads. An XL with 1 toolhead can be upgraded to 2 with a separate kit. For the Prusa XL+, the manufacturer offers separate kits from 1 to 2 and from 2 to 5 toolheads.
How does the kit assembly work?
The manufacturer's manual divides the assembly into six chapters: preparation, securing the printer, disconnecting the toolhead, installing the power supply and electronics with the XLSplitter board, installing the toolheads with spool holders, and first start-up.
What should I do after installing the new toolheads in the printer?
Restore the factory settings and run the wizard. It will repeat the calibration of the docking stations, the pressure sensor and the filament sensors for each toolhead, and at the end it will calibrate the tool offsets.

Nextruder toolhead in the kit packaging
What's in the box
- 3 x Nextruder toolhead with a 0.4 mm nozzle
- 3 x Filament spool holder
- 3 x Silicone heater block sock
- 1 x XLSplitter board
- 1 x Extra power supply
- 2 x 0.4 mm nozzle for the existing toolheads
Technical specifications
| Parameter | Value |
|---|---|
| Manufacturer | Prusa Research |
| Manufacturer's name | Original Prusa XL Dual-Head to Five-Head Upgrade |
| Type | DIY upgrade kit |
| Intended use | Original Prusa XL 3D printer with 2 toolheads |
| Number of toolheads after the upgrade | 5 |
| New toolheads | 3 Nextruder toolheads with a 0.4 mm nozzle |
| Electronics extension | XLSplitter board, extra power supply |
| Spare nozzles | 2 nozzles of 0.4 mm for the existing toolheads |
| Required firmware | version 6.2.4 or newer |
| Calibration after assembly | wizard: docking stations, load cell, filament sensors, tool offsets |
| Assembly tools | not included in the kit, supplied with the Original Prusa XL printer |
| Assembly workspace | workbench of at least 1 x 1 m |
| Assembly manual | 6 chapters, version 1.01 (05/2024) |
Useful links
Data according to the manufacturer (Prusa Research product page and the Original Prusa XL Dual-Head to Five-Head Upgrade assembly manual, version 1.01), as of November 2026.
| Name | Value |
|---|---|
| Prusa - model | XL |
| Width | 60 cm |
| Height | 40 cm |
| Depth | 30 cm |
| Weight | 7 kg |
The full delivery terms are on the page Delivery and payment.
30 days to return, without giving a reason
If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).
Complaints
If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.
Be the first to ask a question about this product!
Instructions and documents
GPSR data
Product information
This product is a component intended for further assembly or prototyping. It is not a finished product within the meaning of the product safety regulations.
There are no reviews for this product yet.
Products from the same category
See all ›
5-Toolhead Upgrade Kit for Original Prusa XL 3D Printer with 2 Toolheads - DIY Assembly
Ask about the product
Have a question about this product? Send us a message and we will get back to you.
We usually reply within one business day. The answer is sent to the e-mail address you provide.