Cap HAT GSM / GPRS / GNSS / Bluetooth for Raspberry Pi - Waveshare 13460

Index: WSR-09893 EAN: 5904422376376

Cap adjusted to the GPIO connectors for Raspberry Pi 3 / 2 / Zero / Zero, which provides connection through standard GSM, GPRS, GPS and Bluetooth. Allows voice chat, to send sms messages. On the Board are: connector for SIM card, microUSB slot, 3.5 mm jack connector, place for battery and antenna connector u.FL.

Cap HAT GSM / GPRS / GNSS / Bluetooth for Raspberry Pi - Waveshare 13460
€31.50
€25.61 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Waveshare
Compatibility: Raspberry Pi

Description

Cap adjusted to the GPIO connectorsRaspberry Pi3 / 2 / Zero / Zero, which provides connection through standard GSM, GPRS, GPS and Bluetooth. Allows voice chat, sending sms messages, connecting to the Internet, transfering data via Bluetooth, has navigation system. On the Board are: connector for SIM card, microUSB slot, 3.5 mm jack connector, place for battery and antenna connector u.FL.

The subject of the sale is the cap with accessories, minicomputerRaspberry Pimust be purchased separately.

On the board is

  1. Module SIM868
  2. Led: ZMM5V1
  3. Diode TVS: SMF05C
  4. Converter USB to UART: CP2102
  5. Chip of power: MP1482
  6. The voltage level translator: NDC7002N
  7. The GPS status indicator 
  8. Indicator NET:
  • quick flashing - the module takes off
  • slow flashing - after successful registration in the network GSM
  • The indicator of operation of module STA
  • Indicator SIM868 UART Tx / Rx
  • The power indicator
  • Control button SIM868: press and hold for 1 sec to turn on / off the module
  • GPIO connector of the Raspberry
  • The SIM card slot
  • USB to UART interface
  • Headphone / microphone jack connector 3.5 mm
  • Antenna GNSS connector 
  • Antenna Bluetooth connector 
  • Antenna GSM connector 
  • Battery slot for RTC
  • Switch UART
    • A: control of the module SIM868 via USB to UART
    • B: control of the module SIM868 using Raspberry Pi
    • C: access of the Raspberry Pi via USB to UART

    Specification

    • Supply voltage: 5 V
    • Operating temperature: -40°C to 85°C
    • Storage temperature: from -45°C to 90°C
    • Dimensions: 30,2 x 65 mm
    • Compatible with Raspberry Pi 3 / 2 / Zero / Zero In
    • Supports: SMS, voice calls, GPRS, DTMF, HTTP, FTP, MMS, email, GPS, compass, GLONASS, LBS, omni-positioning, etc.
    • Bluetooth 3.0
    • USB to UART: Converter CP2102
    • Led: 6, to indicate the status of the module operation
    • Slot for SIM card: 1.8 V to 3 V
    • Battery slot for the RTC (CR1220 battery 3 V- not included in the package)
    • Baudrate: from 1,200 bps up to 115,200 bps
    • Managed by AT commands
    • GSM/GPRS:
      • A band
        • GSM 850 / 900 / 1800 / 1900 MHz
        • automatic search for Quad-band
      • Power
        • Class 4 (2 W 850/ 900 MHz)
        • Class 1 (1 W 1800 / 1900MHz)
      • Data transfer
        • Download speed up to 85.6 kbps
        • Transfer rate: up to 85.6 kbps
        • Coding scheme: CS-1 / CS-2 / CS-3 / CS-4
        • Supports: PAP / PBCCH / USSD
      • SMS
        • Supports: MT / MO / CB / Text / PDU
        • SMS storage: SIM card
      • Audio
        • Encoding / decoding of voice: Half Rate / Full Rate / Enhanced Full Rate / adaptive multi rate
        • Removing of echo
        • Noise reduction
    • GNSS
      • Receiver type
        • 33 tracking channels 
        • 99 purchased channels 
        • GPS L1 C / A
      • Frequency
        • Tracking: -165 dBm
        • Cold start: -148 dBm
      • Time-To-First-Fix
        • Cold start: 28 seconds
        • Warm start: up to 1 sec.
        • Hot start: 26 sec
      • Accuracy up to 2.5 m CEP
    • Bluetooth
      • An integrated AT commands
      • Compatible with Bluetooth 3.0 + EDR
      • Supports: SPP / OPP / HFP / HSP

    The kit includes

    • Cap HAT
    • The microUSB - USB cable
    • GSM antenna
    • GPS antenna
    • Antenna Bluetooth

    Voltage to 3.3 V
    Voltage from 3.3 V
    Interface UART
    Test 3
    Package width 13.6 cm
    Package height 4.2 cm
    Package depth 9.8 cm
    Package weight 0.17 kg

    Radosław

    12/28/20

    Question: Is this overlay compatible with Raspberry Pi 4?
    Answer: Yes, the overlay is also compatible with the Raspberry Pi 4B.

    Product reviews

    Cap HAT GSM / GPRS / GNSS / Bluetooth for Raspberry Pi - Waveshare 13460

    5/5

    Average grade

    5

    Customers opinion
    The following opinions are collected
    and verified by
    an external partner Trustmate
    and come from the post-purchase process.
    Mateusz L. 12.07.2022 Confirmed purchase Translated review
    USB-tested, elegant and no problems.
    Marek W. 02.07.2021 Confirmed purchase Translated review
    very good
    Ksawery M. 14.02.2021 Confirmed purchase Translated review
    I RECOMMEND
    Jozef 08.02.2024 Confirmed purchase
    Przemysław 25.01.2024 Confirmed purchase

    Customers who bought this product also bought:

    Products from the same category: