Product description: Raspberry Pi SSD Kit 256 GB - SSD kit for Raspberry Pi 5
The Raspberry Pi SSD Kit consists of a Raspberry Pi M.2 HAT+ and an official 256 GB Raspberry Pi SSD NVMe drive . The SSD Kit is the perfect solution for Raspberry Pi 5 users who require the high data transfer speeds provided by an NVMe drive. The NVMe SSD provides incomparably better performance compared to traditional USB drives or SD cards . The dedicated Raspberry Pi solution is ready to go right out of the box.
Raspberry Pi SSD Kit 256 GB - SSD kit for Raspberry Pi 5.
Raspberry Pi M.2 HAT+ with accessories.Key Features of the Raspberry Pi SSD Kit
- Excellent SSD performance : the kit comes in two versions: 256 GB or 512 GB of NVMe SSD memory, which provides high data read and write speeds.
- HAT+ Compatibility : The Raspberry Pi M.2 HAT+ is compliant with the Raspberry Pi HAT+ specification, meaning it integrates seamlessly with the Raspberry Pi 5. This gives you peace of mind knowing the product is a perfect fit for your setup.
- Ready to use right out of the box : the SSD is already mounted on the Raspberry Pi M.2 HAT+, allowing you to get up and running immediately without any additional assembly.
- Easy installation with cooling : the kit includes a 16mm spacer and screws, which allows the M.2 HAT+ to be mounted on the Raspberry Pi 5 even when using active cooling. This guarantees not only performance, but also stability under intense loads.
Convenient installation with active cooling
The Raspberry Pi SSD Kit is designed for users who use active cooling on their Raspberry Pi 5. A 16mm standoff and mounting screws are included that allow you to easily mount the M.2 HAT+ to your Raspberry Pi, even if you use a fan or other type of cooling.
Raspberry Pi SSD Kit designed to work with Raspberry Pi 5.
Raspberry Pi 256GB NVMe SSD.Raspberry Pi SSD Kit Specifications
- Disk:
- Memory capacity: 256 GB
- Type: NVMe SSD
- Compatibility: Raspberry Pi M.2 HAT+
- Included: 16 mm spacer, mounting screws
- Supported Device: Raspberry Pi 5
- Disk format: 2230
- Interface: PCIe Gen3x4
- Flash Memory Type: TLC
- Read speed: 3260 MB/s
- Write speed: 2660 MB/s
- Read IOPS (4KB): 40K (256GB) / 50K (512GB)
- Write IOPS (4KB): 70K (256GB) / 90K (512GB)
- Operating voltage: 3.3 V
- Current consumption: 2 A
- Maximum power consumption: 2.8 W
- Operating temperature: 0°C to 70°C
- Dimensions: 22 x 30 x 2.3 mm
- M.2 HAT+:
- Power: PCIe 2.0 / GPIO Raspberry Pi 5
- Maximum data transfer speed: up to 500 MB/s
- Maximum current for M.2 devices: 3 A
- Supported formats: 2230, 2242
- Dimensions: 65 x 56.5 mm
Kit Contents
- NVMe SSD 256GB (installed)
- Raspberry Pi M.2 HAT+
- Distance 16mm
- Mounting screws
