GSM module - Although the transfer of information at distance accompanies man since ancient times, this use for this purpose the electricity (and soon electromagnetism) had its beginning less than two centuries ago. Today no one is surprised by the possibility of voice communication with another person, regardless of whether it is in the same building or on the other side of the globe. Thanks to modern GSM modules is also possible communication with the device controllers, telemetry systems or robots and flying cars. In this category you will find the GSM modules for installation on the target device, as all ready shieldy and Board compatible with Arduino and has an integrated GSM modules.
- New
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
PicoBricks IoT Expert Kit - development kit for Raspberry Pi Pico
Index: RBI-22768
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
GSM modules
Loading...
Cap HAT GSM / GPRS / GNSS / Bluetooth for Raspberry Pi - Waveshare 13460
Cap adjusted to the GPIO connectors for Raspberry Pi 3 / 2 / Zero / Zero, which provides connection through standard GSM, GPRS, GPS and Bluetooth. Allows voice chat, to send...
Index: WSR-09893
Index: WSR-09893
LTE GPS HAT - NB-IoT / LTE / GPRS / GPS SIM7000E - for Raspberry Pi 3B+/3B/2B/Zero - Waveshare 14865
Shield for Raspberry Pi that allows you to send text messages in the GSM network. It also has a GPS and LTE module. It communicates via serial interface UART (RX, TX) using the...
Index: WSR-12531
Index: WSR-12531
SIM868 GSM/GPRS/GNSS + Bluetooth - communication module for Raspberry Pi Pico - Waveshare 20268
SIM868 GSM/GPRS/GNSS + Bluetooth is a communication module for Raspberry Pi Pico. It supports a wide range of 2G frequency bands and communication protocols such as TCP /...
Index: WSR-20092
Index: WSR-20092
DFRobot Shield NB-IoT / LTE / GNSS / GPRS / GPS SIM7070G - Shield for Arduino - DFRobot DFR0572
An Arduino shield that allows you to send text messages and create connections in the GSM network. It also has a GPS and LTE module. It communicates via the UART serial...
Index: DFR-12362
Index: DFR-12362
DFRobot - SIM7600CE-T 4G (LTE) - shield do Arduino
Shield for Arduino module which allows you to send text messages and create calls in the GSM network. It is also equipped with GPS and LTE module. It communicates via UART...
Index: DFR-14047
Index: DFR-14047
A7670E LTE Cat-1 HAT for Raspberry Pi, Multi Band, 2G GSM / GPRS, LBS - Waveshare 20049
A7670E Cat-1 HAT is a module that supports wireless communication modes including LTE-TDD LTE-FDD, GSM, GPRS and EDGE, with 10 Mbps download speed and 5 Mbps uplink speed. It...
Index: WSR-20110
Index: WSR-20110
A-II GSM Shield, GSM/GPRS/SMS/DTMF v.2.105 - for Arduino and Raspberry Pi - assembled
The module working with Arduino and Raspberry Pi that provides communication in GSM and GPRS standard. It allows for voice chat, sending SMS messages. On the board are: two...
Index: RPI-05405
Index: RPI-05405
PiTalk 2G HAT - Wireless Communication Module - for Raspberry Pi - SB Components SKU25978
PiTalk 2G HAT is a module supporting GSM/GPRS + GNSS wireless communication based on the SIM868 chip. It works at 850/900/1800/1900 MHz frequencies. The maximum...
Index: SBC-22961
Index: SBC-22961
Arduino Pro 4G - EMEA - LTE Cat.4 mini PCIe module for Arduino Portenta - TPX00201
Arduino Pro 4G is an advanced mini PCIe module that allows you to add 4G connectivity to projects based on the Portenta platform , ensuring fast data transfer and wide...
Index: ARD-24562
Index: ARD-24562
i-hatGSM3G and c-uGSM/d-u3G/h-nanoGSM for Raspberry Pi
The module facilitating the connection of Raspberry Pi with a radio module of c-uGSM and d-u3G or powering module of g-SPS.
Index: MOD-07065
Index: MOD-07065
- On sale!
- Promotion
A-II GSM Shield, GSM/GPRS/SMS/DTMF v.2.105 - for Arduino and Raspberry Pi + connector for Arduino
The new version of the module working with Arduino and Raspberry Pi that provides communication in GSM and GPRS. Based on Quectel M95, it allows for voice calls, sending SMS...
Index: ITB-10242
Index: ITB-10242
LTE GPS HAT - LTE / GPRS / GPS SIM7600E-H - for Raspberry 4B/3B+/3B/2B/Zero - Waveshare 14952
Shield for Raspberry Pi that allows you to send text messages and create calls in the GSM network. It also has a GPS module. It supports LTE CAT4 up to 150 Mbps. It...
Index: WSR-12533
Index: WSR-12533
The Guardio Micro GSM module is a device enabling communication and supervision via SMS. The device can be used in many areas, e.g. to control a garage door, roller shutters,...
Index: REM-16232
Index: REM-16232
iNode MCU GSM - Bluetooth/WiFi/GSM gateway - ESP32
The iNode MCU GSM device is based on the ESP32 chip and programmed in the microPython language. GSM MCU has no specific functionality, it can, for example, periodically send...
Index: INO-21649
Index: INO-21649
- On sale!
- Promotion
PiTalk 4G HAT - Wireless Communication Module - for Raspberry Pi - SB Components SKU25985
The PiTalk 4G HAT communication module in the form of an overlay compatible with Raspberry Pi minicomputers is based on the Quectel EG25-G system, which enables wireless...
Index: SBC-22963
Index: SBC-22963
Device Prototype Micromis Base V1 WiFi/Bluetooth/GSM - development board - ESP32
Micromis Base V1 is an innovative development board that communicates using WiFi, GSM and Bluetooth wireless networks. Equipped with an accelerometer, gyroscope and...
Index: DPT-23486
Index: DPT-23486
2G/GSM module - u-GSM shield v2.19 M95FA - for Arduino and Raspberry Pi - SMA connector
u-GSM shield v2.19 module with the Quectel M95FA chip enabling GSM connectivity around the world. You can use it to make voice calls and send SMS text messages . On the...
Index: ITB-23891
Index: ITB-23891
j-328GSM3GLader for c-uGSM/d-u3G/h-nanoGSM and Arduino Micro
Module to facilitate connecting an Arduino Micro with the radio modules c-uGSM and d-u3G or powering module g-SPS.
Index: MOD-07067
Index: MOD-07067
- On sale!
- Promotion
A-II GSM Shield, GSM/GPRS/SMS/DTMF v.2.105 - for Arduino and Raspberry Pi
The new version of the module working with Arduino and Raspberry Pi that provides communication in GSM and GPRS. Based on Quectel M95, it allows for voice calls, sending SMS...
Index: ITB-10243
Index: ITB-10243
PiTalk 4G IoT Dongle - USB Wireless Communications Module - SB Components SKU25909
PiTalk 4G IoT Dongle is a USB module based on the Quectel EG25-G LTE Cat 4 chip, providing a 4G LTE-FDD and LTE-TDD connection, as well as 3G WCDMA and 2G GSM . The...
Index: SBC-22962
Index: SBC-22962
Power supply module from the DDRV network source - g-SPS 1.02 for c-uGSM and d-u3G
The powering module and voltage converter for modules of c-uGSM and d-u3G to use with the AC power supply. Input voltage ranges from 5 V to 16 V. The output voltage is 4 V with...
Index: MOD-05174
Index: MOD-05174
f-audioOutputs - audio extender board for c-uGSM and h-nanoGSM shields
Extension that adds a 2 jack connectors to the c-uGSM module. It facilitates the connection of a microphone and headphones or speakers to the Jack 3,5 mm contact.
Index: MOD-07068
Index: MOD-07068
B-GSMGNSS Shield v2.105 GSM/GPRS/SMS/DTMF GPS Bluetooth for Raspberry Pi + connectors for Arduino
Module cooperating with Arduino and Raspberry Pi, which enables communication in GSM and GPRS standard and also GPS + GLONASS and Bluetooth communication. Based on...
Index: ITB-10244
Index: ITB-10244
B-GSMGNSS Shield v2.105 GSM/GPRS/SMS/DTMF + GPS + Bluetooth for Arduino and Raspberry Pi
Module cooperating with Arduino and Raspberry Pi, which enables communication in GSM and GPRS standard and also GPS + GLONASS and Bluetooth communication. Based on...
Index: ITB-10245
Index: ITB-10245
See also
GSM modules, i.e. SMS, HTTP communication and much more
GSM modules produced today allow you to take advantage of almost all the benefits brought by the development of modern mobile telephony networks (in the GSM standard). The module operating in the GSM network is also used in alarm systems (e.g. sending danger notifications). And although many modules still support voice connections, currently this function is relatively least used in devices outside the mobile phone segment - for the purposes of transmitting control, measurement or control data, the ability to send and receive SMS messages and establish Internet connections is much more useful.
In the latter case, you can choose from virtually all the most important protocols and operating modes - including sending HTTP queries, low-level TCP and UDP connections, as well as supporting file transfers to/from FTP servers. Importantly, virtually all GSM modules support AT commands, i.e. an easy-to-implement text protocol that can be successfully used to perform "manual" module tests through any terminal program that supports virtual serial ports (using a USB-UART converter).
GSM modules in all sizes
Our offer includes a wide range of GSM modules (using the telephone line), both in the form of miniature systems to be soldered onto the board of the target device, and ready-made boards equipped with power supply circuits, antennas and all necessary connectors and configuration elements.
The first group includes, for example, the excellent Fibcom G510 Q50-00 GSM/GPRS module, designed for surface mounting using solder pins located on all four sides of the base with dimensions of 20.2x22.2 mm.
The ready-made GSM GPRS Bluetooth module is slightly larger - h-nanoGSM v.1.08. The tiny board measuring 30x32 mm contains (in addition to the module itself) two U.FL antenna connectors, a Power button, a miniUSB socket, LEDs, a SIM card slot and pads for soldering the 2.54 mm goldpin connector. As if that was not enough, there is even an integrated lithium-polymer battery charge controller on the same board.
GSM shields for Arduino and Raspberry Pi
If your project is based on Arduino and you want to avoid running wires between the GSM module and the base board, you will certainly like one of the Arduino Shield shields we offer, containing a GSM module mounted on a board with a design that is 100% hardware compatible with Arduino.
A good example is DFRobot Shield GSM/LTE/GPRS/GPS - the board offers not only fast digital connectivity via the cellular network, but also access to current geolocation (thanks to the GPS receiver).
For Raspberry Pi, we propose an analogous Waveshare LTE GPS HAT module, compatible in size with Raspberry Pi Zero, and therefore also with all other modules from the 3B+/3B and 2B series. We cordially invite you to familiarize yourself with the entire range of the communication section, where you can find, among others: Bluetooth modules , GPS modules , radio modules and many others.
GSM modules - FAQ
The GSM module is an electronic element that enables the implementation of GSM ( Global System for Mobile Communication ) communication in the device, which allows, for example, sending SMS messages or making telephone calls.
Recommended GSM modules for Arduino are offered by brands such as Itbrain Power, Raspberry Pi, DFRobot and Seeedstudio.