Navigation accompanies man from the first attempts to traverse unknown areas. To find out about this, it is enough to recall the stories of ancient sailors and travelers on dry land who used a number of achievements of contemporary science and technology, such as star navigation or compass. Today, the role of the sun and other stars has been taken over by modern GPS and GLONASS systems.
- New
Filament Rosa3D PVB 1,75 mm 0,5 kg - Smooth Green Transparent
Index: ROS-23206
- Reduced price
- Promotion
USB-C Host Shield - hat for Arduino - MAX3421E - SparkFun DEV-21247
Index: SPF-22824
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
GPS modules
Loading...
Antenna Square GPS 2.4V - 5V SMA - 3m
GPS antenna at 1575.42MHz ± 1.02 MHz. Standard cable length is 3 meters. The antenna has a magnetic base so we can place it on a metal surface, e.g. on a car roof. It is...
Index: PSC-14775
Index: PSC-14775
LTE GPS HAT - NB-IoT / LTE / GPRS / GPS SIM7000E - for Raspberry Pi 3B+/3B/2B/Zero - Waveshare 14865
Shield for Raspberry Pi that allows you to send text messages in the GSM network. It also has a GPS and LTE module. It communicates via serial interface UART (RX, TX) using the...
Index: WSR-12531
Index: WSR-12531
Device Prototype Micromis GPS Shield - GPS Module - for Micromis Base V1
Micromis GPS Shield is an overlay for Micromis Base V1 based on the Quectel L70 system and enabling location determination. It is designed to enable precise position and...
Index: DPT-23487
Index: DPT-23487
Multi-GNSS module - L76K - GPS, BeiDou (BDS), GLONASS, QZSS - Waveshare 23721
The L76K GPS module manufactured by Waveshare is a Multi-GNSS module, supports GPS , BeiDou (BDS), GLONASS and QZSS systems and enables precise positioning in...
Index: WSR-22732
Index: WSR-22732
Gravity - BeiDou GNSS GPS receiver module - I2C/UART - DFRobot TEL0157
GNSS GPS BeiDou receiver module with Gravity connector manufactured by DFRobot. The GNSS positioning module supports positioning of both single and multiple systems. Works...
Index: DFR-22671
Index: DFR-22671
LTE GPS HAT - LTE / GPRS / GPS SIM7600E-H - for Raspberry 4B/3B+/3B/2B/Zero - Waveshare 14952
Shield for Raspberry Pi that allows you to send text messages and create calls in the GSM network. It also has a GPS module. It supports LTE CAT4 up to 150 Mbps. It...
Index: WSR-12533
Index: WSR-12533
GNSS/GPS/BDS/QZSS L76B module for Raspberry Pi Pico - Waveshare 20072
Waveshare GNSS module to enable multiple GPS satellite systems using Raspberry Pi Pico module. The overlay for RPi Pico is based on L76B chip and supports satellite systems...
Index: WSR-20109
Index: WSR-20109
Velleman VMA430 - GPS / GLONASS u-Blox NEO-7M UART module with antenna
GPS / GLONASS NEO-7M module on board with goldpin connectors mounted. It supports 56 channels , operates from 3.3 V to 5 V, communicates via the UART interface (TX, RX),...
Index: VEL-13032
Index: VEL-13032
SparkFun GPS Breakout - GPS module with SAM-M10Q chip and antena - Qwiic - SparkFun GPS-21834
SparkFun GPS Breakout - SAM-M10Q is the successor to the popular and frequently used SAM-M8Q GPS module from the same manufacturer. Compared to its predecessor, it has lower...
Index: SPF-23040
Index: SPF-23040
GPS module UBX-G7020-KIT + case - DFrobot
GPS UBX-G7020-KT module has a 56-channel GPS receiver, it operates with a voltage from 3.3 V to 5 V. The update frequency is from 1 Hz to 10 Hz. Communication is via the serial...
Index: DFR-04596
Index: DFR-04596
GNSS MAX-M10S module - Qwiic - SparkFun GPS-18037
SparkFun GNSS Receiver Breakout is a high-quality GNSS receiver with a built-in MAX-M10S chip and an SMA antenna connector. It enables simultaneous reception and processing...
Index: SPF-22065
Index: SPF-22065
Ultimate GPS Logger Shield with SD card reader - Shield for Arduino - Adafruit 1272
Shield for Arduino with a GPS module and a slot for micro SD card. It can be used as a data logger that has an internal antenna and a connector for an external version. It...
Index: ADA-02630
Index: ADA-02630
Ultimate GPS Hat + RTC for Raspberry Pi A+/B+/2/3/4 - Adafruit 2324
Do you want to know where your Raspberry Pi is at any time of the day or night? This shield allows you to read the actual time and position with a frequency of 10 Hz using a...
Index: ADA-03284
Index: ADA-03284
GPS NEO-M9N module - built-in antenna - Qwiic - SparkFun GPS-15733
NEO-M9N high quality module with 92 channel GNSS receiver and built-in antenna. It allows receiving signals from GPS , GLONASS , Beidou and Galileo with an accuracy...
Index: SPF-18450
Index: SPF-18450
PiTalk 4G HAT - Wireless Communication Module - for Raspberry Pi - SB Components SKU25985
The PiTalk 4G HAT communication module in the form of an overlay compatible with Raspberry Pi minicomputers is based on the Quectel EG25-G system, which enables wireless...
Index: SBC-22963
Index: SBC-22963
FeatherWing Ultimate GPS MTK3339 GPS module with antenna - trim to Feather - Adafruit 3133
Module from the Feather family is equipped with a GPS system. It can track 22 satellites, is working with a voltage from 3.0 V to 5.5 V, the frequency of the update is 10 Hz....
Index: ADA-06564
Index: ADA-06564
DFRduino Leonardo + module GSM/GPRS/GPS SIM808 - compatible with Arduino
Board is a combination of Leonardo with SIM808 GSM, GPRS and GPS. It features ATmega32u4 microcontroller and it has 20 digital inputs/outputs, 7 PWM channels, 12 analog inputs,...
Index: DFR-06289
Index: DFR-06289
B-GSMGNSS Shield v2.105 GSM/GPRS/SMS/DTMF GPS Bluetooth for Raspberry Pi + connectors for Arduino
Module cooperating with Arduino and Raspberry Pi, which enables communication in GSM and GPRS standard and also GPS + GLONASS and Bluetooth communication. Based on...
Index: ITB-10244
Index: ITB-10244
B-GSMGNSS Shield v2.105 GSM/GPRS/SMS/DTMF + GPS + Bluetooth for Arduino and Raspberry Pi
Module cooperating with Arduino and Raspberry Pi, which enables communication in GSM and GPRS standard and also GPS + GLONASS and Bluetooth communication. Based on...
Index: ITB-10245
Index: ITB-10245
Arduino MKR GPS Shield ASX00017 - Shield for Arduino MKR
Overlay for Arduino MKR series, allows you to create projects that require GPS location determination. On the board is integrated GNSS u-blox SAM-M8Q . The device can be...
Index: ARD-16718
Index: ARD-16718
The u-GSM shield module with the BG95M2 chip allows for communication in the GSM, LTE, NB IoT standard. With it, you can conduct voice chirps and send SMS text messages ....
Index: ITB-21602
Index: ITB-21602
xyz-mIoT BG95M2 GSM LTE NB IoT EGPRS GNSS module - for Arduino and Raspberry Pi
The xyz-mIoT board is equipped with the Quectel BG95M2 module, which enables LTE CATM1 + NB IoT (CAT NB2 + NB1) communication with GNSS positioning. The module is based on...
Index: ITB-21603
Index: ITB-21603
SparkFun GNSS Correction Data Receiver - NEO-D9S - Qwiic - SparkFun GPS-19390
SparkFun GNSS Correction Data Receiver is a satellite GNSS correction data receiver , designed for transmission with L-band correction . The module can also be configured...
Index: SPF-22244
Index: SPF-22244
RTK Reference Station - for surveying - SparkFun GPS-22429
The RTK reference station from SparkFun is a precise geolocation solution that provides time-referenced measurements. It can also be used by beginners in this field, because...
Index: SPF-23478
Index: SPF-23478
See also
Today we can use satellite technologies, ultra-precise electronics and correction algorithms based on the achievements of 20th-century relativistic physics. The achievements in navigation in the 21st century are simply amazing.
In this category, we present modern GPS modules and other devices for navigation. Thanks to such intelligent navigation systems, you will be sure that you will not get lost during the journey. You will always know not only where you are, but also what is around you. Check out all the products below!
GPS modules are not only on geolocation
The main purpose of the GPS and GLONASS modules is to precisely determine the location of the device. For this purpose, a mechanism has been designed, according to which we can find our current location through the module of geographical coordinates (latitude and longitude). The great advantage of these systems is the availability of satellite signals practically in all areas of the Earth. Depending on the local conditions for propagation of electromagnetic waves, signal reception may be difficult in some places. When it comes to reception in cities, there are practically no problems with GPS or GLONASS navigation today.
Importantly, however, the greater the number of satellites "visible" to the receiver, the better the tracking accuracy. It is worth knowing that global geolocation systems operate on the basis of measuring the propagation time of signals from individual satellites, using for this purpose extremely precise atomic clocks. The time of day information can therefore be used to synchronize the local real time clock of the device with worldwide time standards.
GPS modules for programmable electronics
Our offer includes a number of small GPS / GLONASS modules. These are products that are perfect for use in small mobile robots, portable devices and all prototype systems. GPS geolocation is not only a tool for a car or a mobile phone. In the Botland store you will equip yourself with modules that you can install both in the robot and in another mobile, interesting DIY project!
For this purpose, use the presented PCB modules. A good example of such a module is the small 72-channel SparkFun ZOE-M8Q module, which is compatible - apart from the two above-mentioned systems - also with the European Galileo system and the Chinese BeiDou.
Our offer also includes a small Adafruit Ultimate GPS MTK3339 module with a built-in antenna, 22-channel GPS receiver and Flash memory. For applications from the wearable segment (wearable electronics), a tiny Adafruit FLORA receiver was created, also based on the MTK3339 chip, but built on a 30 mm circular printed circuit board with special, large pads that allow the plate to be sewn in clothes with conductive threads.
GPS shields for Raspberry Pi and Arduino
In addition to universal modules, in our store you will also find overlays prepared especially for the most popular platforms of embedded systems: Arduino and Raspberry Pi. Having in mind the users of the Arduino platform, we have prepared excellent DFRobot Shield DB-Io / LTE / GPRS / GPS modules. On a small board the size of Arduino Uno, the designers from DFRobot managed to place a GSM module with LTE and GPRS support, a GPS / GLONASS / BeiDou / Galileo receiver and an integrated BME280 environmental parameter sensor. The latter subassembly enables convenient and accurate measurement of the ambient temperature, atmospheric pressure and humidity.
Enthusiasts of Raspberry Pi programmable electronics can opt for the equally attractive Waveshare LTE GPS Hat. The module is fully compatible with the Raspberry Pi 3B + / 3B / 2B / Zero and offers GNSS, GSM and NB-IOT connectivity.
Choose the best quality at the best price now. Equip yourself or your DIY project with modern GPS geolocation modules!