Description
The waterproof probe with digital temperature sensor DS18B20+, equipped with a communication interface 1-wire.
Leads are isolated wires:
- power VCC - red
- mass GND - black or green
- data 1-wire - white or yellow
|
The product is compatible with Arduino and Raspberry Pi User guide for Arduino is available at this address. The sensor can also be controlled using the Raspberry Pi, connecting it as described in this article. |
Specification
- Supply voltage: from 3.0 V to 5.5 V
- Measurement range: from -55 °C to 125 °C
- Accuracy: +/- 0,5 °C in range -10 °C to 85 °C
- Resolution: 9 to 12 bits
- Dimensions of probe:
- Diameter: 6 mm
- Length: 51 mm
- Cable length: 1 m
| This version does not work in parasitic power mode (using two wires). The sensor only works in normal mode. |
Useful links |
