Filament PETG Carbon 1,75mm 1kg

Index: SPC-22495 EAN: 5903175652416
PET-G Carbon filament with an admixture of carbon fiber , which significantly increases the stiffness and hardness of the resulting prints compared to standard PETG. Thanks to the addition of carbon fiber, the models can get a matte surface , which will definitely increase the aesthetic value. 1 kg of material with a diameter of 1.75 mm is wound on the spool.
Filament PETG Carbon 1,75mm 1kg
€50.00
€40.65 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Spectrum

Product description: Filament PETG Carbon 1.75 mm 1 kg

PET-G Carbon filament with an admixture of carbon fiber , which significantly increases the stiffness and hardness of the resulting prints compared to standard PETG . It is resistant to stretching while maintaining low shrinkage. Thanks to the addition of carbon fiber, the models can get a matte surface , which will definitely increase the aesthetic value. PETG Carbon will be used in the creation of durable, rigid products , e.g. various types of handles and structural elements. 1 kg of material with a diameter of 1.75 mm is wound on the spool. The filament is vacuum packed with a moisture absorber.

Filament from Spectrum doped with carbon fiber.

The spool contains 1 kg of filament with a diameter of 1.75 mm.

PETG Carbon filament properties

  • High stiffness and hardness of finished models
  • High plasticizing temperature
  • High abrasion resistance
  • High compressive strength
  • Very good layer lamination
  • Matt finish of prints
  • Low shrinkage

Due to the presence of carbon fiber, the manufacturer recommends the use of nozzles with diameters greater than 0.4 mm. In addition, for long-term use of PETG Carbon, the best solution will be a stainless steel nozzle.

Suggested filament printing parameters

printing temperature From 230°C to 255°C
table temperature From 60°C to 80°C
Print speed From 30mm/s to 70mm/s
Print cooling recommended

Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.

Technical specification and physical properties of the filament

PARAMETER RANGE
Filament diameter 1.75mm
Filament dimensional tolerance +/- 0.03mm
Colour Carbon
printing temperature From 230°C to 255°C
table temperature From 60°C to 80°C
Print speed From 30mm/s to 70mm/s
Spool - material PETG Carbon
Density 1.32g /cm3
Thermal resistance HDT B - 72°C, VICAT - 80°C
Vacuum packing Yes
Desiccant Yes
Mass 1 kg

Colour black
Mass 1000 g
Filament - material PETG
Filament - diameter 1.75 mm
Package width 20.5 cm
Package height 21.5 cm
Package depth 7.5 cm
Package weight 1.4 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: