- zdjęcie 1
 - zdjęcie 2
 - zdjęcie 3

Current Sensor ACS723 - SparkFun SEN-13679

Index: SPF-12373 EAN: 5904422372484

Current sensor operating in the range from 10 mA to 5 A on the basis of Hall effect. The output is an analog voltage. The supply voltage is 5 V.

€9.39
€7.64 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: SparkFun
Compatibility: Arduino

Description

Current sensor operating in the range from 10 mA to 5 A on the basis of Hall effect. The output is an analog voltage. The supply voltage is 5 V.

SparkFun Current Sensor Breakout - ACS723

The module can measure direct current and alternating current in the range of up to 5 A, and its basic sensitivity is 400 mV / A. Default sampling rate is 20 kHz.

Pins

The module has the following pins:

SparkFun Current Sensor Breakout - ACS723 Low Current

Pin Description
VCC The supply voltage is 5 V.
VOUT

The output voltage is proportional to the current

IP+ and IP-.

GND The ground of the system.
IP + The input of the current sensor.
IP - The input of the current sensor.

Specification

  • Supply voltage: 5 V
  • Analog output
  • Current measurement: from 10 mA to 5 A
  • Sampling rate: 20 kHz (the possibility of setting to 80 kHz)
  • Chip: ACS723
  • Complete electrical isolation of the control signal, from the measured current
  • Basic sensitivity without amplification: 400 mV / A
  • Module dimensions: 24 x 15 mm

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

ESP32 Thing - Wi-Fi module and Bluetooth BLE - compatible with the Arduino IDE- SparkFun DEV-13907

The module provides communication with wi-fi and Bluetooth BLE, compatible with the Arduino IDE. It has ESP32 system with 520 KB of RAM and 4 MB of Flash memory, 28 GPIO pins,...
Index: SPF-07911
Index: SPF-07911
In stock, shipping 24 hours!
(Check quantity)
Regular price €28.38 Price €28.38

ACS711EX current sensor ACS711EX -15A to + 15A - Pololu 2452

Current sensor working in the range of +/-15 A based on the Hall effect. The output is an analog voltage. Supply voltage is from 3.0 V to 5.5 V.
Index: PLL-01690
Index: PLL-01690
Waiting for confirmation of delivery date
Regular price €4.38 Price €4.38

ACS714 current sensor -5A to + 5A - Pololu 1185

Current sensor working in the range of +/-5 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 4.5 V to 5.5 V.
Index: PLL-00523
Index: PLL-00523
In stock, shipping 24 hours!
(Check quantity)
Regular price €14.28 Price €14.28

Anti magnetic tweezer curved BK15

Stainless steel antimagnetic tweezers. Symbol: Baku BK15ESD.
Index: NSZ-00304
Index: NSZ-00304
Waiting for confirmation of delivery date
Regular price €1.65 Price €1.65

Solder sucker for tin ZD-190

A device for removing tin excess. It has a metal case with a diameter of 20 mm, the length of the device is 190 mm.
Index: LUT-01575
Index: LUT-01575
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.52 Price €1.52

ADXL345 3-axis I2C/SPI digital accelerator - module

Sensor for measuring acceleration in three axes in the range +/- 16 g. The module is powered with the voltage from 3 to 5 V, it has the voltage regulator and is communicating...
Index: MOD-01912
Index: MOD-01912
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.82 Price €2.82

GY-906 MLX90614ESF I2C digital infrared thermometer - pyrometer module

A sensor for temperature measurement that uses infrared radiation analysis. It communicates via the I2C bus. It works with a voltage of 3.0 V to 5.0 V.
Index: MOD-04594
Index: MOD-04594
Unavailable
Regular price €17.38 Price €17.38
  • EOL

Photo Interrupter Sensor, Speed Measuring - Waveshare 12225

Digital module with optical sensor, with a gap of 6 mm. The module has a built-in comparator, because of this, the output is a digital signal. Supply voltage is from 3.3 V to 5...
Index: WSR-08834
Index: WSR-08834
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.74 Price €3.74

Distance sensor, reflective 3,3V/5V - 30mm - Waveshare 9523

The reflective module with IR sensor equipped with digital and analog output. It works with a voltage from 3 V to 5.3 V. It enbales the detection of obstacles in the range from...
Index: WSR-04459
Index: WSR-04459
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.96 Price €3.96

Cellevia Li-Pol cell 1600mAh 1S 3,7V - connector 2,54mm

3.7 V lithium-polymer battery with a capacity of 1600 mAh and JST connector. Weight is 33 g and dimensions 50 x 34 x 9 mm. The cable terminated with a JST socket and free...
Index: AKU-03074
Index: AKU-03074
Available, 24h shipping!
(Check quantity)
Regular price €12.30 Price €12.30

Transistor N-MOSFET 2N7000 - 10pcs.

Unipolar transistor N-MOSFET THT, 60 V, 0.2 A. Price for 10 pieces.
Index: UCC-08318
Index: UCC-08318
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.74 Price €1.74

SparkFun Proto Shield Kit

A set of basic electronic elements along with a universal board which is suited to the connectors of Arduino. A kit for self-assembly.
Index: SPF-01768
Index: SPF-01768
Unavailable
Regular price €8.78 Price €8.78
  • EOL

Products from the same category

Hall sensor AH49E - Waveshare 9522

Module with Hall sensor with analog and digital output. It works with voltage from 2.3 V to 5.3 V. It provides the detection of a magnetic field.
Index: WSR-04494
Index: WSR-04494
Waiting for confirmation of delivery date
Regular price €3.52 Price €3.52

AC current sensor SCT 013-030 - up to 30A

The sensor measures the intensity of the current flowing in the cable without its opening. Measurement occurs through the insulation on a single wire, the output is the analog...
Index: MOD-04273
Index: MOD-04273
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.58 Price €6.58

ACS711EX current sensor ACS711EX -15A to + 15A - Pololu 2452

Current sensor working in the range of +/-15 A based on the Hall effect. The output is an analog voltage. Supply voltage is from 3.0 V to 5.5 V.
Index: PLL-01690
Index: PLL-01690
Waiting for confirmation of delivery date
Regular price €4.38 Price €4.38

Voltage divider 5V/25V for Arduino

A voltage divider is used, when the measured voltage has a larger value than the A/D converter's range. The device works in the range from 0 V to 25 V. The output voltage has a...
Index: MOD-08231
Index: MOD-08231
Waiting for confirmation of delivery date
Regular price €0.77 Price €0.77

ACS711EX current sensor -31A do +31A - Pololu 2453

Current sensor working in the range of +/- 31 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 3 V to 5.5 V.
Index: PLL-01689
Index: PLL-01689
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.73 Price €4.73

ACS714 current sensor -5A to + 5A - Pololu 1185

Current sensor working in the range of +/-5 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 4.5 V to 5.5 V.
Index: PLL-00523
Index: PLL-00523
In stock, shipping 24 hours!
(Check quantity)
Regular price €14.28 Price €14.28

ACS709 current sensor -75A do +75A - Pololu 2199

Current sensor operating in the range of +/- 75 A, based on the Hall effect. The output is analog voltage. Supply voltage from 3.0 V to 5.5 V.
Index: PLL-00526
Index: PLL-00526
Available, shipping 24h!
(Check quantity)
Regular price €18.68 Price €18.68

Module with Hall sensor, magnetic field

Module with Hall sensor, analog magnetic switch. It allows for the detection of the magnetic field. The module has no soldered passive elements. It works with voltage of 5 V.
Index: OST-14290
Index: OST-14290
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.01 Price €1.01

DFRobot Gravity: Analog AC Current Sensor SCT 013-020 - to 20A

The sensor measures the intensity of the current flowing in a pipeline without its opening. Measurement occurs through the insulation on a single wire, and the output is the...
Index: DFR-06932
Index: DFR-06932
Delivery scheduled for 2022-02-03
Regular price €19.78 Price €19.78

ACS714 current sensor -30A to + 30A - Pololu 1187

Current sensor operating in the range of +/- 30 A, based on the Hall effect. The output is analog voltage. Supply voltage from 4.5 V to 5.5 V.
Index: PLL-00524
Index: PLL-00524
Available, shipping 24h!
(Check quantity)
Regular price €13.18 Price €13.18

iNode Energy Meter - energy consumption monitor - phototransistor

iNode Energy Meter with a photoresistor is a wireless power consumption monitor with built-in memory. Designed mainly for home automation. Thanks to the power consumption...
Index: INO-09929
Index: INO-09929
Delivery scheduled for 2022-02-02
Regular price €23.98 Price €23.98

Module with Hall sensor - Iduino SE014

The module with the Hall sensor, the detection range of the magnetic field is regulated with the potentiometer. It has a built-in digital and analog connector. Powered with the...
Index: OST-14293
Index: OST-14293
Delivery scheduled for 2022-02-04
Regular price €1.45 Price €1.45