Rangefinder - TF02-Pro-W LiDAR sensor IP5X - 25m - RS485

Index: BEN-21537
The TF02-Pro-W LiDAR laser distance sensor is based on ToF technology. The distance detection range is 0.1m to 25m . The module is equipped with a wiper mounted on a servo located inside the sensor housing, which is used to clean its surface from all kinds of contamination. As a result, it can be used in a dusty environment. The sensor housing is made of PC / ABS, the protection class is IP5X , which ensures protection against water and dust. Benewake LiDAR TF02-Pro-W for communication uses the RS485 interface, Modbus protocol , it is powered with the voltage from 7 V to 30 V.
Rangefinder - TF02-Pro-W LiDAR sensor IP5X - 25m - RS485
€206.90
€168.21 tax excl.
Waiting time: 6-8 weeks
Only on request
PayPal payment
Manufacturer: Benewake

Product description: Lidar TF02-Pro-W IP5X laser distance sensor - 25m - UART / I2C

The TF02-Pro-W LiDAR laser distance sensor is based on ToF technology. The distance detection range is 0.1m to 25m . The module is equipped with a wiper mounted on a servo located inside the sensor housing, which is used to clean its surface from all kinds of contamination. As a result, it can be used in a dusty environment. The sensor housing is made of PC / ABS, the protection class is IP5X , which ensures protection against water and dust. Benewake LiDAR TF02-Pro-W for communication uses the RS485 interface, Modbus protocol , it is powered with the voltage from 7 V to 30 V. LiDAR TF02-Pro-W supports LoRaWAN, 4G, WiFi and other data transmission solutions. The sensor also supports battery power, so there is no need for additional wiring.

LiDAR sensor with wiper

The TF02-Pro-W module is equipped with a servo with a wiper.

TF02-Pro-W with automatic cleaning system

The Benewake LiDAR TF02-Pro-W module has a built-in servo, on which the wiper is placed. For 24 hours, the wiper carries out 6 operations to clean the sensor from dust and other contaminants. The wiper is also activated each time the module is connected to the power supply. Additionally, the user may control the sensor independently by sending appropriate commands to the sensor cleaning system and modifying the wiper movement time. While the wiper is moving, the sensor does not measure and send no data.

Specification of the LiDAR TF02-Pro-W motion sensor

  • Supply voltage: 7 V to 30 V
  • Current consumption: ≤ 200 mA / 12 V
  • Power consumption: ≤ 4.8 W
  • Peak current: 400mA / 12V
  • Logic voltage: 3.3 V
  • Photobiological Safety: Class1 (EN60825)
  • Measurement range:
    • for 90% reflectance: 0.1 to 25 m
    • for a reflectivity of 10%: from 0.1 to 12 m
    • for 90% reflectance and 100 k lux: 0.1 m to 25 m
    • for 10% reflectance and 100 k lux: 0.1 m to 12 m
  • Accuracy:
    • up to 6 m: ± 6 cm
    • from 6 m: 1%
  • Resolution: 1 cm
  • Repeatability: 1σ : <2 cm="" li="">
  • Operating frequency: 1 Hz to 1000 Hz (default 100 Hz)
  • Light beam length: 850 nm
  • Operating angle: 3 °
  • Protection degree: IP5X
  • Housing material: PC / ABS
  • Corrosion resistant
  • Resistant to contamination
  • Ambient light resistant up to 100 klux
  • Working temperature: -25 ° C to 60 ° C
  • Storage temperature: -30 ° C to 80 ° C
  • Communication: RS485, Modbus protocol
  • Cable length: 120 cm
  • Dimensions: 85 x 59 x 43 mm
  • Weight: 92 g
Lidar TF02-Pro-W IP5X laser distance sensor - 25m - UART / I2C

Laser distance sensor LiDAR TF02-Pro-W IP5X - 25m - UART / I2C.

Voltage to 7.0 V
Voltage from 30.0 V
Sensor - type distance
Sensor - distance to 2500 cm
Sensor - distance from 0.1 cm

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: