- Reduced price
Description
Module with sensor MiCS5524 detecting the carbon monoxide, alcohol and volatile organic compounds. It is powered with the voltage of 5 V. It has an analog output and that makes it compatible with various miicrocontrollers, includingArduino.
Specification
- Power Supply: 5 V
- Analog output
- Sensitivity:
- CO: from 1 ppm to 1000 ppm
- Ammonia: from 1 ppm to 500 ppm
- Ethanol: from 10 ppm to 500 ppm
- Hydrogen: from 1 ppm to 1000 ppm
- Methane / propane / isobutan: from 1000 ppm
- The sensor detects only the value, it does not distinguish gases
- Pins: goldpin connectors, 2.54 mm pitch (for self-soldering)
- Board sizes: 20 x 12.7 mm
- Weight: 0.9 g
Specifications and other detailed information can be found in thedocumentation.
|
The product is compatible with Arduino The manufacturer providesa sample programforArduino. |
Recognition
The sensor detects only the concentration of gases in the air. It does not distinguish them, and therefore, it cannot be concluded which of the gases has been detected. The module is intended for educational and hobbystic purposes. There is no guarantee of proper operation in medical, protective or other similar applications. Before use, the sensor requires calibration.
Pins
The module has holes for goldpin connectors, 2.54 mm pitch - strap is included in the set for self-soldering.
| Pin | Description |
|---|---|
| 5V | The supply voltage of 5 V |
| GND | The ground of the system |
| A0 | Output signal - analog voltage. |
| En | Indicating the low status, causes a transition of the system into the low power consumption status. The system is enabled by default. |
Useful links |
