Real Time Clock Module - RV-1805 (Qwiic)
Real Time Clock Module - RV-1805 (Qwiic)
 - zdjęcie 1
Real Time Clock Module - RV-1805 (Qwiic) - zdjęcie 2
Real Time Clock Module - RV-1805 (Qwiic) - zdjęcie 3

Low Current Sensor ACS723 - SparkFun SEN-14544

Index: SPF-12374 EAN: 5903351249386

Current sensor operating in the range from 10 mA to 5 A on the basis of Hall effect. The output is an analog voltage. The supply voltage is 5 V. It has a built-in amplifier and potentiometer for adjusting the sensitivity.

€17.14
€13.93 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: SparkFun
Compatibility: Arduino

Description

Current sensor operating in the range from 10 mA to 5 A on the basis of Hall effect. The output is an analog voltage. The supply voltage is 5 V. It has a built-in amplifier and potentiometer for adjusting the sensitivity.

SparkFun Current Sensor Breakout - ACS723 Low Current

The module can measure direct current and alternating current in the range of up to 5 A, and its basic sensitivity is 400 mV / A. Default sampling rate is 20 kHz. Built-in amplifier is able to achieve 2.2 to 22 V / V.

Pins

The module has the following pins:

SparkFun Current Sensor Breakout - ACS723 Low Current

Pin Description
VCC The supply voltage of 5 V.
VOUT

The output voltage proportional to the current

IP+ and IP-.

GND The ground of the system.
IP + The input of the current sensor.
IP - The input of the current sensor.

Specification

  • Supply voltage: 5 V
  • Analog output
  • Current measurement: from 10 mA to 5 A
  • Sampling rate: 20 kHz (the possibility of setting to 80 kHz)
  • System: ACS723
  • Complete electrical isolation of the control signal, from the measured current
  • Basic sensitivity without amplification: 400 mV / A
  • Adjustable sensitivity, built-in amplifier: from 2.2 to 22 V / V
  • Module dimensions: 32 x 15 mm

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Connecting cables female-male 20cm - 40pcs

Set includes 40 PCs of multi-colored connecting cables with a length of 20 cm, on one side ended with a female  connector, on the other, with a male connector.
Index: KAB-01067
Index: KAB-01067
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.31 Price €1.31
  • On sale!

Connecting cables male-to-male 20cm - 40pcs

Set includes 40 PCs of multi-colored hook-up wires with a length of 20 cm ended, on both sides, with the male connector.
Index: KAB-01223
Index: KAB-01223
Waiting for confirmation of delivery date
Regular price €1.31 Price €1.31
  • EOL

Male-male connecting cables - 75 pieces

75 set of connecting cables for breadboard of different lengths and in different colors.
Index: KAB-01378
Index: KAB-01378
Waiting for confirmation of delivery date
Regular price €2.79 Price €2.79

Grove - IR transmitter 940nm

IR transmitter from Grove,  emitting light with a wavelength of 940 nm. It works with a supply voltage from 3.3 V to 5.0 V. Sensor provides a signal to a distance of 10...
Index: SEE-04418
Index: SEE-04418
Waiting for confirmation of delivery date
Regular price €1.87 Price €1.87

Arduino Mega 2560 Rev3 - module A000067

Popular module with microcontroller AVR ATmega2560 . It has 256 KB Flash memory, 8 KB RAM, 54 digital inputs/outputs, of which 15 can be used as PWM channels, 16 analog...
Index: ARD-01062
Index: ARD-01062
In stock, shipping 24 hours!
(Check quantity)
Regular price €34.98 Price €34.98

Akyga Li-Pol 1600mAh 1S 3,7V battery - JST-BEC connector + socket - 50x34x9mm

Akyga brand battery made in Li-Pol technology with a nominal voltage of 3.7 V and a capacity of 1600 mAh . The weight is 31 g and the dimensions are 50 x 34 x 9 mm. It...
Index: AKU-12212
Index: AKU-12212
Delivery scheduled for 2022-02-11
Regular price €5.39 Price €5.39

DFRobot Gravity: GPIO - Shield for Arduino

Shield for Arduino, which extends the capabillities of pins of the I/O. It has, i.a. led out each pin with a pair of power. It has 36 pins, including 14 digital pins, 6 analog...
Index: DFR-07444
Index: DFR-07444
Unavailable
Regular price €9.68 Price €9.68
  • EOL

Grove - Base Shield v2 - Shield for Arduino

Shield for Arduino, which extends the capabilities I/O pins. Designed for modules and sensors from the Grove series. It has 4-pin connectors, and all the outputs known from...
Index: SEE-04440
Index: SEE-04440
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.84 Price €4.84

Arduino USB Host Shield - USB - Shield for Arduino A000004

Shield for Arduino with USB Host MAX3421E controller and USB type A slot. It allows you to connect devices with USB output, such as keyboard or gamepad. It has led out all of...
Index: ARD-04792
Index: ARD-04792
Unavailable
Regular price €26.18 Price €26.18
  • EOL

Numato Lab - Digital and Analog IO Expander Shield for Arduino

Overlay for Arduino to expand I/O pins. It has Arduino UNO pin system and 28 additional digital pins with two MCP23017 controllers and 16 additional analog pins with NXP...
Index: MOD-12184
Index: MOD-12184
Unavailable
Regular price €19.58 Price €19.58
  • EOL

FT232H - USB converter for UART, SPI, I2C, GPIO - Adafruit 2264

Board allows you to communicate with the modules and sensors directly from the computer. It supports the most popular interfaces: UART, I2C, SPI, it also has some GPIO pins.
Index: ADA-03003
Index: ADA-03003
In stock, shipping 24 hours!
(Check quantity)
Regular price €17.58 Price €17.58

ATSAMD09 Seesaw I2C - Adafruit 3657

Seesaw ATSAMD09 is a universal framework transducer which expands the number of pins for microcontrollers or microcomputers with I2C interface. It extends the board with...
Index: ADA-10319
Index: ADA-10319
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.14 Price €6.14

Products from the same category

Hall sensor AH49E - Waveshare 9522

Module with Hall sensor with analog and digital output. It works with voltage from 2.3 V to 5.3 V. It provides the detection of a magnetic field.
Index: WSR-04494
Index: WSR-04494
Waiting for confirmation of delivery date
Regular price €3.52 Price €3.52

AC current sensor SCT 013-030 - up to 30A

The sensor measures the intensity of the current flowing in the cable without its opening. Measurement occurs through the insulation on a single wire, the output is the analog...
Index: MOD-04273
Index: MOD-04273
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.58 Price €6.58

ACS711EX current sensor ACS711EX -15A to + 15A - Pololu 2452

Current sensor working in the range of +/-15 A based on the Hall effect. The output is an analog voltage. Supply voltage is from 3.0 V to 5.5 V.
Index: PLL-01690
Index: PLL-01690
Waiting for confirmation of delivery date
Regular price €4.38 Price €4.38

Voltage divider 5V/25V for Arduino

A voltage divider is used, when the measured voltage has a larger value than the A/D converter's range. The device works in the range from 0 V to 25 V. The output voltage has a...
Index: MOD-08231
Index: MOD-08231
Waiting for confirmation of delivery date
Regular price €0.77 Price €0.77

ACS711EX current sensor -31A do +31A - Pololu 2453

Current sensor working in the range of +/- 31 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 3 V to 5.5 V.
Index: PLL-01689
Index: PLL-01689
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.73 Price €4.73

ACS714 current sensor -5A to + 5A - Pololu 1185

Current sensor working in the range of +/-5 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 4.5 V to 5.5 V.
Index: PLL-00523
Index: PLL-00523
In stock, shipping 24 hours!
(Check quantity)
Regular price €14.28 Price €14.28

ACS709 current sensor -75A do +75A - Pololu 2199

Current sensor operating in the range of +/- 75 A, based on the Hall effect. The output is analog voltage. Supply voltage from 3.0 V to 5.5 V.
Index: PLL-00526
Index: PLL-00526
Available, shipping 24h!
(Check quantity)
Regular price €18.68 Price €18.68

Module with Hall sensor, magnetic field

Module with Hall sensor, analog magnetic switch. It allows for the detection of the magnetic field. The module has no soldered passive elements. It works with voltage of 5 V.
Index: OST-14290
Index: OST-14290
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.01 Price €1.01

DFRobot Gravity: Analog AC Current Sensor SCT 013-020 - to 20A

The sensor measures the intensity of the current flowing in a pipeline without its opening. Measurement occurs through the insulation on a single wire, and the output is the...
Index: DFR-06932
Index: DFR-06932
Delivery scheduled for 2022-02-03
Regular price €19.78 Price €19.78

ACS714 current sensor -30A to + 30A - Pololu 1187

Current sensor operating in the range of +/- 30 A, based on the Hall effect. The output is analog voltage. Supply voltage from 4.5 V to 5.5 V.
Index: PLL-00524
Index: PLL-00524
Available, shipping 24h!
(Check quantity)
Regular price €13.18 Price €13.18

iNode Energy Meter - energy consumption monitor - phototransistor

iNode Energy Meter with a photoresistor is a wireless power consumption monitor with built-in memory. Designed mainly for home automation. Thanks to the power consumption...
Index: INO-09929
Index: INO-09929
Delivery scheduled for 2022-02-02
Regular price €23.98 Price €23.98

Module with Hall sensor - Iduino SE014

The module with the Hall sensor, the detection range of the magnetic field is regulated with the potentiometer. It has a built-in digital and analog connector. Powered with the...
Index: OST-14293
Index: OST-14293
Delivery scheduled for 2022-02-04
Regular price €1.45 Price €1.45