Pump for fluids with a performance of 110 l/hour. The device is powered with voltage of 12 V. Equipped with connectors with a diameter of 7 mm.
Pump for fluids with a performance of 110 l/hour. It has a diameter of 7 mm. The engine used in the pump is supplied with the voltage of 12 V, consumes about 0.3 A of current.
| Package width | 8 cm |
| Package height | 3.5 cm |
| Package depth | 12 cm |
| Package weight | 0.104 kg |
| Karim
03/13/23 | Question: How much is the capacity of the pump (L/h) when powered by 6V? |
Answer: The pump works only with 12 volts, and then its output is 110 l/h. | |
| Karim
03/13/23 | Question: What is the smallest voltage needed to power the pump? |
Answer: The pump starts as low as 6 volts, but its output is much lower. | |
| Sławomir
03/06/23 | Question: Up to what maximum liquid temperature can this pump operate? |
Answer: The maximum liquid temperature at which the pump can operate is 60°C. | |
| Marcin
06/06/22 | Question: Request to match the cheapest power supply that can drive the pump. |
Answer: To power the pump will be enough power supply, for example, 12 / 1 A (the pump has a load of about 0.3 A ), unfortunately, such a power supply is currently unavailable from us. Can suggest possibly: https://botland.com.pl/zasilacze-dogniazdkowe/13908-zasilacz-impulsowy-huntkey-12v2a-wtyk-dc-5521mm-5904422352707.html | |
| Konrad
03/28/22 | Question: What material is the pump made of? |
Answer: Unfortunately, we have not been able to obtain detailed information from our supplier about the materials used for the pump housing. | |
| Karol
10/25/21 | Question: Hi, is it possible to control this pump ( Liquid pump 12V 110l/h - 7mm ) from raspberry pi 4? Greetings :) |
Answer: The pump can be controlled using a relay, for example: https://botland.com.pl/przekazniki-przekazniki-arduino/1997-modul-przekaznika-1-kanal-z-optoizolacja-styki-10a-250vac-cewka-5v-5904422302337.html | |
