Description
Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with a built-in class D amplifier with a power of 3 W. The device supports speakers with an impedance of 8 Ω, it works with sample rates from 44.1 kHz up to 192 kHz, it requires no external power source.
The device is intended forRaspberry Pi Zero but also works with larger versions.
Key features
- Output power is 3 W
- It works with speakers with an impedance of 4 to 8Ω, which should be connected to the screw connections of the type ARK.
- Board has special connectors for the GPIO of the Raspberry Pi, to connect it, you don't need any extra wires or adapters. It works with minicomputer in version 4B, 3B+, 3B, 2B, A+, B, Zero.
- It requires no external power source. It is powered directly with Rapsberry
- The device works withthe Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero.
- The weight of the boiard is 20 g, and dimensions are 65 x 30 x 10 mm.
Connection
HiFiBerry installation is very simple, you just need to insert a memory card into the card reader of the computer, then run the configuration program and select the appropriate board and the operating system. The app will automatically install the operating system with appropriate driver. After transfering the card to Raspberry Pi, HiFiberry board will already be properly configured.
Description of the installation for a finished operating system can be found at this address, the list of supported systems is available on the website of the manufacturer.
The configuration program of HiFiBerry is very simple and intuitive.
Video
Video facilitating the selection of a right version of the HiFiBerry.
|
Online, you can find the system Max2Play for HiFiBerry which allows you to create configuration multiroom, using several models of the Raspberry. More information on blog MalinowePi. |
Useful links |
