Grove - current sensor ASC725 - 10A

Index: SEE-14421 EAN: 5904422342494

Popular ASC725 current sensor based on Hall effect, equipped with Grove interface significantly facilitating the use of the sensor with Arduino and Raspberry Pi. Sensor needs 3.3V or 5V power supply to work and can measure current up to 10A at voltage up to 400V.

€11.72
€9.53 tax excl.
Available, 24 hours shipping!
Check quantity
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: Seeedstudio
Compatibility: Arduino Raspberry Pi

Product description: Grove - DC current sensor ACS725 - 10 A

Popular current sensor ASC725 based on Hall effect, widely used in industry, automotive systems, communication systems. It is an economical solution and quite precise at the same time. Typical applications for it include load management and overload protection. This model was made by Seeed Studio and is equipped with standard Grove interface which makes it easy to use sensor with Arduino and Raspberry Pi by Grove Base Hat. Connecting the current to the measurement is done with a simple screw terminal. The sensor requires a 3.3 V or 5 V supply to operate and can measure current up to 10 A at voltages up to 400 V.

Design of the Grove ACS725 DC Sensor - 10A

Opis elementów czujnika prądu Grove

1 SIG: analog output, sends current value to MCU
2 NC: not connected
3 VCC:5 V or 3.3 V for this module
4 GND: connection of module to ground
5 measurement current connection (minus)
6 measurement current connection (plus)

Specification for Grove ACS725 DC Sensor - 10 A

  • Supply voltage: 3.3 V / 5 V
  • Operating voltage: <400 v="" li="">
  • Current sensing range: 0 A to 10 A
  • Basic sensitivity: 264 mV/A
  • Output interface: Analog
  • Input interface: screw terminal
  • Ambient temperature during operation: -40°C to 150°C
  • Storage temperature: from -65°C to 165°C

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Mono 2.5W Class D Audio Amplifier - PAM8302 - Adafruit 2130

The module with class D audio amplifier. It is characterized by low power losses. It allows to connect a 4-8 ohm speaker of 2.5 W power. It has a built-in potentiometer for...
Index: ADA-06381
Index: ADA-06381
Available, 24 hours shipping!
Check quantity
Regular price €5.19 Price €5.19

Module 8 relays with optoisolation - 10A / 250VAC contacts - 5V coil

The module has eight SRD-12 relay with a coil powered with a voltage of 12 V along with optical isolation of the input and mounting holes. The system allows you to control...
Index: GRL-10915
Index: GRL-10915
Delivery scheduled for 2022-06-03
Regular price €8.18 Price €8.18

ACS714 current sensor -30A to + 30A - Pololu 1187

Current sensor operating in the range of +/- 30 A, based on the Hall effect. The output is analog voltage. Supply voltage from 4.5 V to 5.5 V.
Index: PLL-00524
Index: PLL-00524
Waiting for confirmation of delivery date
Regular price €13.00 Price €13.00

ESP32 WiFi + BT 4.2 - platform with module ESP-WROOM-32 compatible with ESP32-DevKit

Tile ESP32-DevKitC with a built-in module ESP-WROOM-32. The module has leads in the form of goldpins, pitch 2.54 mm. The system from the family ESP32 for communication in a...
Index: MOD-08893
Index: MOD-08893
In stock, shipping 24 hours!
Check quantity
Regular price €13.00 Price €13.00

Grove ESP8285 V2 - WiFi UART module

Grove Wi-Fi module based on a ESP8285 system with built-in TCP/IP and support AT commands. It supports the most popular protection, such as WEP, WPA/WPA2, TKIP, AES and WAPI....
Index: SEE-13241
Index: SEE-13241
In stock, shipping 24 hours!
Check quantity
Regular price €13.87 Price €13.87

I2C converter for HD44780 LCD display

The I2C converter for the popular display with controller HD44780 for example, 2x16 characters. Thanks to this system, two data lines and supply 5 Volts and groundare enough...
Index: LCD-02352
Index: LCD-02352
Goods pending acceptance - available within a few days
Regular price €2.15 Price €2.15

Anti-magnetic curved tweezers TS-15 - 110mm

Anti-magnetic tweezers made of stainless steel. It has acid resistant properties. Symbol: TS-15, length: 110 mm.
Index: NSZ-08775
Index: NSZ-08775
Waiting for confirmation of delivery date
Regular price €1.07 Price €1.07

Antimagnetic straight tweezers TS-14 - 115mm

Anti-magnetic tweezers made of stainless steel. It has acid resistant properties. Identification: TS-14, length: 115 mm.
Index: NSZ-08774
Index: NSZ-08774
Available, 24 hours shipping!
Check quantity
Regular price €1.07 Price €1.07

Solder wick for tin 1.5 mm

Solder wick for removing tin excess. Width 1,5 mm, length 1.5 m.
Index: LUT-09263
Index: LUT-09263
Delivery scheduled for 2022-06-20
Regular price €1.28 Price €1.28

DFRobot Gravity: Analog 20A Current Sensor

Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.
Index: DFR-08367
Index: DFR-08367
In stock, shipping 24 hours!
Check quantity
Regular price €10.39 Price €10.39

Female socket 2x20 raster 2,54mm for Raspberry Pi

40 -pin female connector strip used in Raspberry Pi model 4B/3B+/3B/2B/Zero. Raster 2.54 mm.
Index: UCC-05578
Index: UCC-05578
In stock, shipping 24 hours!
Check quantity
Regular price €0.86 Price €0.86

Socket 1x4pin - 2,54mm - 10pcs.

4-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm.
Index: UCC-08503
Index: UCC-08503
Waiting for confirmation of delivery date
Regular price €0.41 Price €0.41

Products from the same category

Grove - voltage divider 5V/43V

A voltage divider is used, when the measured voltage has a larger value than the AC converter range. The device operates in two ranges, selectable with a switch: from 0.3 V to...
Index: SEE-04428
Index: SEE-04428
Waiting for confirmation of delivery date
Regular price €6.51 Price €6.51

Grove - current sensor ACS70331 - 2,5A

Popular current sensor ASC70331 using magneto-resistance, equipped with  the Grove interface that facilitates greatly the use of the sensor in cooperation with Arduino and...
Index: SEE-14422
Index: SEE-14422
Waiting for confirmation of delivery date
Regular price €8.01 Price €8.01

Grove - Hall sensor / magnetic field

Module from the Grove series based on sensor A1101. It is powered by a supply voltage of 3.8 V to 24 V It provides the detection of a magnetic field. The kit also includes a...
Index: SEE-11315
Index: SEE-11315
In stock, shipping 24 hours!
Check quantity
Regular price €1.93 Price €1.93

Grove - current sensor ACS70331 - 5A

Grove's high-precision DC/AC ± 5 A sensor can measure both DC and AC up to 5 A based on the ACS70331. It is based on giant magnetoresistive technology (GMR). The sensor...
Index: SEE-14340
Index: SEE-14340
Waiting for confirmation of delivery date
Regular price €4.75 Price €4.75

Grove - AC current sensor TA12-200

The sensor measures the intensity of the current flowing in the pipeline without its opening. Measurement occurs through the insulation on the one wire, output is the current...
Index: SEE-11306
Index: SEE-11306
In stock, shipping 24 hours!
Check quantity
Regular price €9.11 Price €9.11

Grove - LTC2941 - Coulomb Counter 3.3V/5V

A module designed for reading the level of rechargeable single-chamber Li-Pol batteries, from 3.3 V to 5 V in real-time.
Index: SEE-13514
Index: SEE-13514
In stock, shipping 24 hours!
Check quantity
Regular price €12.13 Price €12.13