



Wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.
Wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.
The cable allows you to connect two servos to one input of the controller. Both servos are controlled by the same signal.
Raster | 2.54 mm |
Cable - type | to servos |
Cable length | 0.3 m |
Lead | 3 |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia, The United Kingdom
Finland, Greece, Ireland, Liechtenstein, Serbia, Spain, Switzerland, Sweden
No customer reviews for the moment.
Servo TowerPro SG-90 - micro - 180 degrees
Servo type micro. Speed: 0.1 sec/60 ° . Torque: 1.8 kg*cm Dimensions: 22 x 12 x 27 mm. Weight: 9 g.Servo Hitec HS-325HB - standard
A strong servo is a standard full carbon clincher wheelset, carbon modes increased strength.. Speed: 0.15 s/60 ° . Torque: 3.7 kg*cm. Dimensions: 40 x 20 x 37 mm....Customers who bought this product also bought:
Cable for analog distance sensors Sharp - men's tip - Pololu 1799
Cable with plug for analog distance Sharp sensors with a male end. Length: 30cm.Cable for analog distance sensors Sharp - female end - Pololu 1798
Cable with plug for analog distance Sharp sensors with a female tip. Length: 30 cmBattery storage case for 2 packs AA (R6) with cover and switch
Basket with cover and switch for two AA batteries (large fingers).Slide switch ESP1010 - straight
Slide switch, straight to print with the size of 10 x 2.5 x 6.5 mm. Pins pitch: 2.54 mm.AVR microcontroller - ATmega32A-PU - DIP
Popular microcontroller AVR from ATmel in a case DIP40.Micro Maestro USB 6-channel servo driver - Pololu 1350
6-channel servo controller with support for digital and analog signals. The user has at his or her disposal, the control of the servos through: the PC app (USB), serial...Servo TowerPro SG-5010 - standard
Servo of standard type, double bearing. Speed: 0.16 s /60 ° . Torque: 6.5 kg. Dimensions: 40 x 20 x 41 mm. Weight: 48 g.Servo TowerPro MG-995 - standard
Strong standard servo. Speed: 0.13 sec /60 ° . Torque: 15 kg*cm Dimensions: 41 x 20 x 38 mm. Weight: 55,2 gRandomCategoryProducts
Splitter Wire for Servos Y - 30 cm twisted (JR)
Twisted wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.Splitter Wire for Servos Y - 60 cm twisted (JR)
Twisted wire splitter for servos with length of 60 cm. The wire allows you to connect two servos to one input of the controller.Extension cord for servings 30cm twisted
Extension cable with the length of 30 cm ended with the standard plug for the servos. It has twisted cables.Splitter Wire for Servos Y - 60 cm (JR)
Wire splitter for servos with length of 60 cm. The wire allows you to connect two servos to one input of the controller.Extension cord for servos 15cm twisted
Extension cable with the length of 15 cm ended with the standard plug for the servos. It has twisted cables.Extension cord for servos 45cm twisted
Extension cable with the length of 45 cm ended with the standard plug for the servos. It has twisted cables.Extension cord for servos 90 cm - twisted
Extension cable with the length of 90 cm ended with the standard plug for the servos. It has twisted cables.Grove - servo splitter - 20cm - 5pcs
A set of five Grove cables to connect e.g. Base Shield v2 to servers, actuators, sensors or devices with a Grove connector. Each one is 20 cm long and consists of a 4-pin Grove...Extension cord for servos 60 cm - twisted
Extension cable with the length of 60 cm ended with the standard plug for the servos. It has twisted cables.JST Battery to Servo Power Adaptor - Kitronik 4176
An adapter that allows powering the servo from the battery or accumulator with JST plug. The cable length is 50 mm. The cable is terminated with a 3-pin plug and a 2-pin...