Description
The device supports the control of fluid flow using a computer or microcontroller, including Raspberry Pi or Arduino. The device is powered with voltage of 12 V, max. pressure is 0.1 bar.
Specification
- Supply voltage: 12 V
- Current consumption: approx. 200 mA
- Terminal: 4 mm
- Maximum pressure: 0.04 MPa (0.4 bar)
- The temperature of the liquid: from 0°Cto 70°C
- Time of:
- opening: < 0.15 sec
- closing: < 0.3 sec
- Closed in the rest position