Product description: Fermion - 3-axis accelerometer - I2C H3LIS200DL - DFRobot SEN0408
Fermion series module withH3LIS200DL 3-axis accelerometer , manufactured by DFRobot. It features very low power consumption (up to 10 µA), as well as high noise immunity. The module has a user-selectable broad scale ranging from ± 100 g to ± 200 g and is capable of measuring accelerations at frequencies from 0.5 Hz to 1 kHz. It communicates over an I2C interface and is powered by 3.3 V . The sensor is equipped with dedicated algorithms to detect motion.
Product compatible with Arduino
A detailed user guide is available on the manufacturer's website to help you get started with the module.
Fermion - 3-axis accelerometer - I2C H3LIS200DL - DFRobot SEN0408.
Module equipped with H3LIS200DL chip.
Technical specifications of the Fermion accelerometer:
- Operating voltage: 3,3 V
- Operating current:
- 10 µA minimum (low power mode)
- 0.3 mA to 0.4 mA (normal mode)
- Interface: I2C / SPI
- I2C address: 0x19 (default) / 0x18 (selectable)
- Measuring scale: ± 100g / ± 200g
- Frequency of measurement: 0.5 Hz to 1 KHz
- 8-bit data output
- Operating temperature: from -40°C to 85°C
- Shock resistance 10000 g
- Dimensions: 15 mm x 20 mm
Kit includes:
- 1 x Fermion - I2C H3LIS200DL 3-axis accelerometer
- 2 x 4-pin goldpin connector - 2.54 mm pitch
Pinout description
- VCC - power supply pin 3.3 V
- GND - system ground
- SCL - I2C interface clock line pin
- SDA - I2C data line pin
- INT2 - interrupt 2 pin
- INT1 - interrupt 1 pin
- CS - select SPI
- SDO - I2C address selection / SPI data line
Overview of the module functions
- Large selectable measuring scale range: from ± 100 g to ± 200 g
- Two independent programmable interrupt outputs
- Intelligent sleep and wake-up function
- Rapid impact detection and recording
- Free fall detection
- Automotive collision test
Two 4-pin goldpin strips are included - 2.54mm raster.
Useful links |
