Pololu - by-pass voltage regulator 33.0V, 4.1Ω, 10W
Pololu - by-pass voltage regulator 33.0V, 4.1Ω, 10W
Pololu - by-pass voltage regulator 33.0V, 4.1Ω, 10W
Pololu - by-pass voltage regulator 33.0V, 4.1Ω, 10W
Pololu - by-pass voltage regulator 33.0V, 4.1Ω, 10W - zdjęcie 1
Pololu - by-pass voltage regulator 33.0V, 4.1Ω, 10W - zdjęcie 2
Pololu - by-pass voltage regulator 33.0V, 4.1Ω, 10W - zdjęcie 3
Pololu - by-pass voltage regulator 33.0V, 4.1Ω, 10W - zdjęcie 4

Shunt Voltage Regulator: 33,0V, 4,1Ω, 15W - Pololu 3777

Index: PLL-13479 EAN: 5904422341817

The shunt regulator can protect the power supplies from voltage spikes generated by the motor controllers connected to them. This version has a fixed value of 33.0 V, a shunt resistance of 4.1 Ω and 32 SMT shunt resistors located on one side of the PCB. An external potentiometer can be used to set the voltage.

€5.28
€4.29 tax excl.
Waiting time approx. 4-6 weeks
Only on request
30-day returns
PayPal payment
Manufacturer: Pololu

Product description: By-pass voltage regulator 33.0 V, 4.1 Ω, 15 W - Pololu 3777

The shunt regulator canprotectpower suppliesfrom voltage spikes generated bymotor controllersconnected to them. This version has a fixed value of33.0 V, a shunt resistance of4.1 Ωand32SMT shunt resistorslocated on one side of the PCB. An externalpotentiometercan be used toset the voltage.

The regulator should be installed in parallel with thepower supplyfor proper operation. The supply voltage should be lower than the regulator voltage and the regulator should draw only resting current less than 0.5 mA. Any voltage pulses above the setting will cause the regulator to draw significantly more current, dissipating energy and limiting the range of voltage variation.

Shunt voltage regulator 33.0 V, 4.1 Ω, 15 W - Pololu 3777.

Wiring diagram of a shunt regulator between the power supply and the motor controller.

Wiring diagram of the regulator

A simplified schematic of a shunt regulator is shown next. The circuit monitors the voltage and controls theMOSFET, which allows current to flow through the shunt resistance, which sets the maximum current the device can absorb.

Simplified schematic of a shunt regulator.

All Pololu shunt regulators differ only in voltage value and resistance. The available versions can be found in the table below:

Voltage
13,2 V 26,4 V 33,0 V Fine adjustment LV Fine adjustment of HV
Power: 3 W
-
-
32,8 Ω
-
-
9 W
1,33 Ω
4,00 Ω
4,00 Ω
-
-
15 W
1,50 Ω
2,80 Ω
4,10 Ω
1,50 Ω
4,10 Ω

On the left is the bottom appearance of the 3 W and 9 W regulator, while on the right is the 13 V, 1.50Ω, 15 Wregulator.

Note!

The power is primarily intended to indicate the relative average power consumption for a maximum of a few seconds. The boards are designed to clip occasional, short pulses. Prolonged application of voltage above the set point will destroy the regulator almost immediately (in less than a second).

Adjusting the voltage set point

The shunt regulator is available in two adjustable versions with multi-turn potentiometers. All fixed voltage versions can also be adjusted by adding a potentiometer on the board.

The two adjustable versions differ only in the shunt resistance and the mapping optimization of the voltage setting potentiometer.

On the left are the leads for the fixed-voltage regulator, on the right are the leads for the adjustable-voltage regulator.

Schematics of the set voltage relative to the adjusted potentiometer:

LV curve on the left: 1.50Ω, 15 W; HV curve on the right: 4.10 Ω, 15 W.

Diagrams of the adjusted voltage against the adjusted potentiometer

The HV curve was obtained using a 200 kΩ potentiometer with a 33.0 V plate, using a 200 kΩ potentiometer with low voltage constant value plates will disturb the mapping by looking like an LV curve. (100 kΩ or lower value potentiometers can be used at the expense of higher resting current, since the full supply voltage is applied through this potentiometer.)

When setting the voltage with a potentiometer, or to check the exact voltage of any shunt regulator, connect a higher voltage with a current-limiting resistor of at least a few hundred Ω and measure the voltage on the regulator. (Without a current limiting resistor, the regulator would not work if set higher than the test supply voltage and would start to smoke if set below your supply voltage !) Typically, you should set the regulator about 10% above your supply voltage.

Voltage Regulator Specifications - Pololu 3777

  • Output voltage: 33,0 V
  • Shunt resistance: 4.1Ω
  • Power: 15 W
  • Maximum resting current: 0.5 mA
  • Dimensions: 28.5 x 20.3 x 7.6 mm
  • Weight: 3.0 g

Length 29 mm
Width 21 mm
Height 8 mm
Voltage to 33.0 V
Voltage from 33.0 V
Voltage output from 33.0 V
Output voltage to 33.0 V
Current 0.5 A
Stabilizer - Type2 shunt

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Products from the same category

Shunt Regulator: 26,4V, 2,8Ω, 15W - Pololu 3775

The shunt regulator can protect the power supplies from voltage spikes generated by the motor controllers connected to them. This version has a fixed value of 26.4 V, a shunt...
Index: PLL-13476
Index: PLL-13476
Waiting time approx. 4-6 weeks
Regular price €5.28 Price €5.28

Shunt Regulator: 33,0V, 32,8Ω, 3W - Pololu 3780

The shunt regulator can protect the power supplies from voltage spikes generated by the motor controllers connected to them. This version has a fixed value of 33.0 V, a shunt...
Index: PLL-13477
Index: PLL-13477
Waiting time approx. 4-6 weeks
Regular price €3.72 Price €3.72

Shunt Regulator: 33,0V, 4,0Ω, 9W - Pololu 3776

The shunt regulator can protect the power supplies from voltage spikes generated by the motor controllers connected to them. This version has a fixed value of 33.0 V, a shunt...
Index: PLL-13478
Index: PLL-13478
Waiting time approx. 4-6 weeks
Regular price €3.94 Price €3.94

Shunt Regulator Fine-Adjust LV, 1.50Ω, 15W - Pololu 3778

The shunt regulator can protect power supplies from voltage spikes generated by motor controllers connected to them. This version has precise voltage adjustment from 4 V to 18...
Index: PLL-13480
Index: PLL-13480
Waiting time approx. 4-6 weeks
Regular price €9.68 Price €9.68

Shunt Regulator Fine-Adjust HV, 4.10Ω, 15W - Pololu 3779

The shunt regulator can protect power supplies from voltage spikes generated by motor controllers connected to them. This version has precise voltage adjustment from 4 V to 35...
Index: PLL-13481
Index: PLL-13481
Waiting time approx. 4-6 weeks
Regular price €9.68 Price €9.68

Shunt Regulator: 13.2V, 1.33Ω, 9W - Pololu 3770

The shunt regulator can protect the power supplies from voltage spikes generated by the motor controllers connected to them. This version has a fixed value of 13.2 V, a shunt...
Index: PLL-13473
Index: PLL-13473
Waiting time approx. 4-6 weeks
Regular price €3.94 Price €3.94

Shunt Regulator: 13.2V, 1.5Ω, 15W - Pololu 3771

The shunt regulator can protect the power supplies from voltage spikes generated by the motor controllers connected to them. This version has a fixed value of 13.2 V, a shunt...
Index: PLL-13474
Index: PLL-13474
Waiting time approx. 4-6 weeks
Regular price €5.28 Price €5.28

Shunt Regulator: 26,4V, 4,0Ω, 9W - Pololu 3774

The shunt regulator can protect the power supplies from voltage spikes generated by the motor controllers connected to them. This version has a fixed value of 26.4 V, a shunt...
Index: PLL-13475
Index: PLL-13475
Waiting time approx. 4-6 weeks
Regular price €3.94 Price €3.94