• EOL

Sharp GP2Y0D805Z0F - digital distance sensor 5cm with PCB base - Pololu 1132

Index: PLL-01622 EAN: 5904422330170

Digital distance sensor Sharp GP2Y0D805Z0F to detect objects at a distance of up to 5 cm. The system has soldered PCB stand, making it easier to use it.

Sharp GP2Y0D805Z0F - digital distance sensor 5cm with PCB base - Pololu 1132
€40.90
€33.25 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Pololu
Compatibility: Arduino Raspberry Pi

Attention!

The product has been discontinued. Check other products in category.

Specification

  • Supply voltage: 2.7 to 6.2 V
  • Average current consumption: 5 mA
  • Measuring range: from 0.5 to 5 cm
  • Output value: digital signal (low status when detecting an object, otherwise - high status)
  • Response time: 2,55 ms (maximally 3.77 ms)
  • Soldered PCB stand
  • Weight: 0.7 g

 

Description

The sensor can detect object in the range of up to 5 cm. The output is a digital signal. High status (logical one) indicates no object in the field of view of the sensor. Low status (logical zero) appears when the object is detected.

 

Schemat działania czujnika Sharp

A drawing depicting an operating method of a digital sensor Sharp.

 

PCB stand

The sensor has soldered PCB stand that facilitate the installation and use of the sensor. Board has the essential passive components for the sensor's operation and LED signaling the detection of the object. Using the stand, the sensor's maintenance is reduced to connecting three pins: power - VCC, ground - GND, and a logic output signal, marked with the OUT symbol. Board has goldpin pins that facilitate the connection of the sensor with the commissioning set (e.g.ArduinoorSTM32Discovery) viaconnecting cables.
 

The product is compatible with Arduino

For proper operation, it is sufficient to connect power supply of 5 V and the sensor output to any digital pin of Arduino. Reading is done through a standard functiondigitalRead(number_of_pin).

 

Alternative distance sensors

In our store, available are analog versions of sensors detecting the objects in the range of: 4-30cm10-80cm20-150cm and digital sensors, to detect objects in the field of view of up to: 5 cm10cm and 40cm.

 

Voltage to 2.7 V
Voltage from 6.2 V
Interface Digital I / O
Sensor - distance to 5 cm
Sensor - distance from 0.5 cm
Package width 8 cm
Package height 9.5 cm
Package depth 0.9 cm
Package weight 0.003 kg

Be the first to ask a question about this product!

Product reviews

Sharp GP2Y0D805Z0F - digital distance sensor 5cm with PCB base - Pololu 1132

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

Dymytry N. 13.04.2022 Confirmed purchase Translated review
Works well.

Customers who bought this product also bought:

Products from the same category: