Product description: Filament Prusa PETG 1.75 mm 2 kg - Recycled
The filament from Prusa is used in FDM / FFF 3D printers. The product consists of 100% recycled PETG Prusament. There are no other additives or pigments in the mix, so each batch has a different color. Filament with a diameter of 1.75 mm and a net weight of 2 kg . PETG is a strong material characterized by high temperature resistance.
Filament Prusa PETG 1.75 mm 2 kg - Recycled - each spool has a different color.
Features of the Prusament PETG
- High temperature resistance
- Ease of printing
- Low shrinkage
- Increased strength and durability
- The recommended maximum drying temperature for Prusament PETG is 60 ° C for a minimum of 4 hours
- Tends to string
- It is not intended for printing small details
Suggested filament printing parameters
| Head temperature | From 240 ° C to 260 ° C |
| Table temperature | From 70 ° C to 90 ° C |
| Cooling the print | Recommended |
|
Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the Prusa filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.02 mm |
| Use | FDM / FFF 3D printing |
| Chemical name of the filament | Poly (ethylene terephthalate) copolymer |
| Material shrinkage | Short |
| Color | Each spool is different |
| Spool - material | PETG Recycled |
| Spool diameter | 200 mm |
| Spool width | 126 mm |
| Mounting hole diameter | 52 mm |
| Net product weight | 2 kg |
