• EOL

Snapmaker 3D Printer v2.0 3in1 model A150 - laser module, CNC, 3D printing in enclosure

Index: SNM-19369 EAN: 6971573448145
A set which includes Snapmaker A150 version 2.0 multifunction device and a chamber designed to increase safety while working with Snapmaker. The device is made entirely of metal, its assembly is quick and easy and the whole construction is very stable. The working area of Snapmaker A150 is 160 x 160 x 145 mm.
Snapmaker 3D Printer v2.0 3in1 model A150 - laser module, CNC, 3D printing in enclosure
€1,483.50
€1,206.10 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Snapmaker

Attention!

The product has been discontinued. Check other products in category.

Product description: 3D Printer Snapmaker v2.0 3 in 1 model A150 - laser module, CNC, 3D printing in enclosure

A set that includes the Snapmaker A150 version 2.0 multifunction device and a chamber designed to increase safety while working with Snapmaker. The device is made entirely of metal, assembly is quick and easy and the whole structure is very stable. The working area of Snapmaker A150 is 160 x 160 x 145 mm. It comes with modules for printing with 1.75 mm diameter filament, laser engraving and CNC sculpting.


Check out our YouTube channel for a tutorial on how to create a decorative lamp with the help of Snapmaker.

Snapmaker 2.0 3D printing module.

3D Printing - Snapmaker 2.0's flagship feature

Thanks to its sturdy design and the solutions used in the device, Snapmaker 2.0 allows for fast and precise printing. The device is good for both beginners and advanced users, if only because it has very intuitive software to operate the device in printer mode, which allows for numerous modifications. Thanks to heated workbench and direct type extruder we can use many printing materials. Finally, the problems with flexible filaments are over!

Improved printhead

The printhead has been redesigned with an improved cooling system, hot-end quick-change system, and improved quality of the extruder parts, which significantly improves the quality and consistency of the print.

Ulepszony system chłodzenia
Materiały obsługiwane przez SnapMakera

Variety of supported materials

The printer supports various types of materials such as PLA, ABS, PETG, TPU, PP, WoodFill and LayBrick. You can choose layer thicknesses from 0.05 to 0.3 mm.

Automatic levelling

The printer is equipped with a proximity sensor, so the table calibration is done automatically. You can switch to manual mode and calibrate the table yourself.

Automatyczne poziomowanie
Czujnik filamentu

Felt sensor

Precise sensor constantly monitors the state of the filament and in case of its lack stops the printing without damaging the printout. After refilling the material it is possible to resume printing.

Resume operation after power failure

SnapMaker 2.0 allows you to quickly resume printing after a power loss. To do this, simply press the "resume" button on the touch screen.

Wznowienie po utracie zasilania
Obudowana konstrukcja

Enclosure included

The use of housing allows you to maintain a constant temperature during printing, which greatly facilitates the work with filaments such as ABS without the risk of deformation of the print.

High quality not only on paper

Thanks to the combination of steel, aluminum and perfectly matched parts the repeatability of the machine is as low as0.005 mm, a result that allows you to perform even short series production. Snapmaker 2.0 will prove to you that nothing is impossible and it is a pleasure to work with.

Laser engraving and cutting

The laser module allows for extremely precise cutting and engraving. You can create interesting items made of wood, leather, fabric and acrylic. With the 1.6W laser, you can cut selected materials and bring more professionalism to your designs. The laser module has a camera so that you can afford to perfectly adjust the working area to the actual workpiece.

SnapMaker 2.0 Printer Laser Module

The 1600 mW module allows you to engrave and cut materials such as wood, leather and plastic.

Grawerowanie i cięcie laserowe
Wbudowana kamera

Built-in camera

The laser module has a built-in camera for Auto Focus and Camera Capture, making it easier to align the laser beam and achieve optimal engraving results.

Auto Focus

Engraving results are presented without the need to repeatedly test the focal point. The optimum parameters are selected automatically.

Auto Focus
SnapMaker Luban

Camera image capture

The camera automatically takes a picture of the material placed on the workbench and sends the image to Luban's SnapMaker software where you can apply and edit patterns, giving you an accurate preview of what the final result will look like.

Acrylic casing

The housing is made of material that protects against the harmful effects of the laser on your eyes. In addition, the set includes protective goggles OD6.

Obudowa urządzenia
Wentylator

Built-in fan

The built-in fan allows you to extract the fumes generated during the laser engraving process.

3-in-1 Software

Are you impressed with the capabilities of Snapmaker 2.0 ? If so, you need to know that the software allows you to control all of the Snapmaker 2.0 functions! The configuration panel is designed so that you have access to all functions. No more searching for separate software for your 3D printer, laser router, and CNC milling machine, everything is in one place.

Presentation of the software to control the device.

CNC module in operation.

CNC machining is just another advantage of Snapmaker 2.0

The CNCmodule allows precision machining of materials such as wood, acrylic, carbon fiber sheets, or even PCB laminate. Start making your own PCBs and create your own sculptures, see what you can use this feature for! The set includes a wooden table and a set of hooks that prevent the material from moving.

CNC carving

The new CNC carving module uses ER11 collets with better concentricity for more precise and consistent results. The collets are interchangeable with other sizes. The module is compatible with drill bits with diameters from 0,5 to 6,35 mm.

Rzeźbienine CNC
Moduł CNC

Working speed of the CNC module

The spindle can operate from 6000 to 12000 revolutions per minute as required.

CNC working platform

The carving platform made of MDF provides stability and accuracy while working.

Platforma robocza
Redukcja szumów

Reduction of noise while working

The included enclosure reduces operating noise by up to 10 dBA.

Snapmaker 2.0 modular design

Imagine that one design can replace several tools in the workshop. That is exactly what the Snapmaker 2.0 is! Its modular design allows you to fully customize the functionality to your needs. We are not dealing here with a series of machines, Snapmaker 2.0 is a powerful tool for people as creative as you.

The device is built with modules that make it easy to expand.

The process of assembling the device takes very little time.

Extremely easy to assemble!

Snapmaker 2.0 makes the process of assembly as easy as possible, the motors are built into the profiles and the plates for connecting the components are permanently attached to the linear systems, so it is safe to assemble and use the device. Unlike amateur counterparts that take hours to assemble, the Snapmaker 2.0 will only take a moment to assemble, with the added support of a paper and electronic manual.

Wi-Fi connectivity and touch screen

For maximum convenience in setting up Snapmaker 2.0 has been introduced Wi-Fi communication. In addition to uploading files to the device, you can also easily update them, on devices in the local network you can run the console that controls the device. The control module is equipped with Android and a fast processor, so controlling the device is very simple and fast.


Large touch screen makes it easy to work with the device.

SnapMaker 2.0

A large touch screen makes it easy to use the device.

The device is equipped with numerous procedures that will certainly help beginners to get started. The automatic work table leveling eliminates the problem of having to calibrate the platform every few prints. The function of returning to work after a loss of voltage provides an extraordinary security, we do not have to be afraid that during the accidental disconnection of the device from the power supply we will lose our work. Improved relative to the previous version of the device print cooling system allows us to create parts that will be partially in the air without the use of supports. Elastic pad increasing adhesion makes the printout stick to the table without any additional preparations. We also do not have to use tools to unstick the printout from the platform, just bend it and the printout will fall off. The camera built in the laser module is an invaluable help in determining the area on which the laser works, No more self-centering on a part with an unusual shape. Linear modules have been fully enclosed, thus avoiding the possibility of seizure of moving parts by getting chips or dust.

Are you afraid that you will not be able to handle the device? You do not have to worry about it! The manufacturer provides a manual that explains step by step how to assemble the device and how to configure it for specific functions, this is a huge advantage.

Increased work safety with the chamber designed for the A150

The casing, which elements are made of aircraft aluminum alloy, which is characterized by high strength and low weight, and acrylic with a coating that filters the laser radiation used by the engraving module. The use of the chamber significantly increases the safety of working with the device. One of the systems increasing work safety is the chamber door opening sensor, which almost immediately stops the device in case of its opening. The chamber has an additional lighting system based on LED diodes and a ventilation system allowing for effective removal of vapours produced during operation of the device. The entire structure is airtight, which minimizes the risk of printout damage due to shrinkage, warping or tearing off the printout from the working platform due to a stronger gust of air. The airtight chamber also protects the work with CNC module , stopping all the small chips.

Ściany boczne wykonano z akrylu filtrującego świtało lasera.

The side walls are made of acrylic which filters the laser light.

Snapmaker 2.0 Specifications

Basic information
Color display: 5" touchscreen
Frame material: aluminum alloy, steel
Communication: USB drive, USB cable, Wi-Fi
Supply voltage: 100 V to 240 V AC
Supported systems: Mac OS, Windows
Dimensions of assembled device 700 (L) x 660 (W) x 580 (H) mm
Working area for 3D printing: 160 (L) x 160 (W) x 145 (H) mm
Working area for laser: 160 (L) x 160 (W) mm
Workspace for CNC: 160 (L) x 160 (W) x 90 (H) mm
3D Printing
Nozzle diameter: 0.4 mm
Maximum temperature of the printing nozzle: 275°C
Maximum work platform temperature: 110°C
Layer resolution: 50 to 300 microns
Supported materials: PLA, ABS, PETG, TPU, PP, WoodFill, LayBrick
Filament diameter: 1.75 mm
Supported file formats in Snapmaker Luban: .stl, .obj
Laser engraving
Laser power: 1600 mW
Safety class: 3B
Supported materials: Wood, leather, plastic, fabric, paper, acrylic
Supported file formats in Snapmaker Luban: .svg, .png, .jpg, .jpeg, .bmp, .dxf
CNC Sculpting
Chuck diameter: 0.5 mm to 6.35 mm
Spindle speed: 6000 to 12000 RPM
Supported materials: wood, acrylic, PCB, carbon fiber sheets
Supported file formats in Snapmaker Luban: .svg, .png, .jpg, .jpeg, .bmp, .dxf, .step, .dwg

Kit includes:

  • Linear modules
  • Laser module (1600 mW with built-in camera)
  • 3D printing module
  • Controller (based on Cortex-M4 processor)
  • 5" Intelligent touch screen (operated by Android, based on Quad Core A7 1.1 GHz processor)
  • Power supply with power cables
  • Magnetic table for 3D printing with adhesive pad
  • Aluminium table for laser module
  • Wooden table for working with CNC module (module equipped with ER-11 holder)
  • Machine base with anti-slip feet
  • Base for working platform
  • Supports for linear modules
  • Mounting for touch screen
  • Cable set for connection of the modules, work table, linear modules and screen
  • Converters for cables
  • Fiber holder
  • Flash drive
  • Material mounts for working with CNC module
  • Set of tools (screwdriver with interchangeable tips, wrenches, pliers, tweezers, spatula)
  • Set of screws
  • Plates for leveling the working platform
  • Assembly and use instruction manual
  • Two pairs of protective goggles (for work with CNC and laser)
  • Two cutters
  • Spool of filament (1 kg of PLA)
  • Set of test materials
  • Material for cleaning
  • Snapmaker A150 compatible protective chamber

Mechanical Processing with Snapmaker 2.0 A150

The A150 is the smallest model in the Snapmaker 2.0 series of 3D printers. It is a great tool for creating small prototypes. By attaching the appropriate attachment, the Snapmaker 2.0 A150 printer can be turned into a miniature CNC machine tool. In this way, you can use it to produce metal objects, such as mechanical moving parts of machines, housing elements, as well as static structural elements.

Snapmaker 2.0 A150 - Laser engraving

The smallest of the Snapmaker 2.0 series, it is also an advanced machine that allows laser engraving on materials such as glass, wood and plastic. With this feature, we can make permanent markings on cases, reliefs, and create Christmas ornaments. Both in the case of using the functions of CNC machine tool, laser engraving and 3D printing, an important role is played by the enclosed housing, which effectively protects against metal filings produced by milling, laser light harmful to the eyes, and against harmful fumes of plastic 3D printing filaments.

3D - print surface 160x160x145 mm
3D - type of printout FFF/FDM
3D - accuracy of printing 0.1 mm
3D - hotend amount 1
Package width 50.5 cm
Package height 58 cm
Package depth 58 cm
Package weight 28.5 kg

Be the first to ask a question about this product!

Product reviews

Snapmaker 3D Printer v2.0 3in1 model A150 - laser module, CNC, 3D printing in enclosure

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Wojciech B. 26.10.2021 Confirmed purchase Translated review
For now, I am testing but I see many possibilities. I recommend it to everyone who wants to start playing with 3D printing or cutting or engraving.

Customers who bought this product also bought:

Products from the same category: