Cyfrowa stacja 937D - 60W
Cyfrowa stacja 937D - 60W
Cyfrowa stacja 937D - 60W - zdjęcie 1
Cyfrowa stacja 937D - 60W - zdjęcie 2

Soldering station WEP 937D - 40W

Index: LUT-00658 EAN: 5907558240757

Grotto WEP soldering station 937D with power of 40W and adjustable temperature from 200 °C to 480 °C. It has a LED display which shows the set temperature of the soldering tip.

€26.26
€21.35 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
Manufacturer: WEP

Description: Soldering station WEP 937D - 40W

Grotto WEP soldering station 937D with power of 40W with a smoothly adjustable temperature in the range from 200 °C to 480 °C. It has a ceramic heating element and a digital temperature indicator in form of a LED display that shows the set temperature of the grotto.

Specification of soldering station WEP 937D - 40W

  • Power supply: from 220 V to 240 V
  • Power: 40 W
  • The case and the flask ESD SAFE
  • Adjustment of temperature in the range from 200 °C to 480 °C
  • It has a ceramic heating element
  • Dimensions of soldering station: 110 x 90 x 130 mm
  • Digital LED display showing the set temperature of the soldering tip

 

Check out our offer of additional tips!

Included

  • Soldering station 937D WEP
  • Mount for putting down the flask along with cleaning sponge
  • The soldering flask with mounted tip T-I
  • Power cable

 

First run

  • After delivery of equipment, it should not be immediately started.
  • Equipment must remain about 12 hours at room temperature before switching on.
  • All applications for damages caused by the premature commissioning of the equipment, will be denied.
  • You must completely remove the screw/screws from the bottom of the station if the source of air supply is compressor. These screws are marked in red (1 or 3 screws depending on model).

Our range of accessories for soldering:

 

Voltage to 220 V AC
Voltage from 240 V AC
Voltage nominal 230 V AC
Nominal power 40 W
Temperature 200 - 480 °C
Solder - Fan no
Solder - real temperature reading no
Solder - Hotair no
Solder - Type A/C digital

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

Solder wick for tin 2 mm

Solder wick for removing tin excess. Width 2 mm, length 1.5 m.
Index: NSZ-00172
Index: NSZ-00172
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.91 Price €0.91
  • Free shipping

Tip cleaner for soldering tools with stand

Soldering tips cleaner made from brass chips.
Index: LUT-00613
Index: LUT-00613
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.86 Price €4.86
  • Free shipping

Solder sucker for tin OD-25

A device for removing tin excess. It has a Teflon tip, metal case with 20 mm in diameter. Length of the device is 228 mm.
Index: LUT-00630
Index: LUT-00630
Unavailable
Regular price €4.63 Price €4.63
  • Free shipping

Sponge for cleaning soldering tips - round - 5pcs.

Round sponge for cleaning the soldering iron blade with a diameter of about 50 mm.
Index: LUT-00638
Index: LUT-00638
Available, 24h shipping!
(Check quantity)
Regular price €1.84 Price €1.84
  • Free shipping

Customers who bought this product also bought:

Smoke and flammable MQ-2 gas sensor - semiconductor

Smoke and flammable gases detector with analogue output.
Index: PLL-00548
Index: PLL-00548
Czas oczekiwania ok. 10-30 dni
Regular price €1.37 Price €1.37
  • Free shipping

Alcohol sensor MQ-3 - semiconductor

Alcohol sensor with analog output. It measures the content of alcohol, for example, in the exhaled air.
Index: DNG-00061
Index: DNG-00061
Czas oczekiwania: ok. 10-30 dni
Regular price €1.98 Price €1.98
  • Free shipping

MQ-4 methane sensor - semiconductor

Sensor of methane with analogue output.
Index: PLL-00240
Index: PLL-00240
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.12 Price €3.58
  • Free shipping
  • Reduced price
  • On sale

LPG, isobutane, propane MQ-6 sensor - semiconductor - Pololu 1481

Smoke and combustible gases detector with analogue output.
Index: PLL-00549
Index: PLL-00549
Czas oczekiwania ok. 10-21 dni
Regular price €5.09 Price €5.09
  • Free shipping

MQ-7 carbon monoxide sensor - semiconductor

Carbon monoxide sensor with analog output.
Index: DNG-00239
Index: DNG-00239
Czas oczekiwania ok. 10-30 dni
Regular price €1.84 Price €1.84
  • Free shipping

Carbon monoxide and flammable gases MQ-9 sensor - semiconductor - Pololu 1483

Sensor of carbon monoxide and combustible gases with analogue output.
Index: PLL-00550
Index: PLL-00550
Czas oczekiwania ok. 10-21 dni
Regular price €7.65 Price €7.65
  • Free shipping

Stand for MQ - gas sensor - Pololu 1479

Stand that allows mounting of sensors from MQ series.
Index: PLL-00238
Index: PLL-00238
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.15 Price €1.15
  • Free shipping

CNY70 reflective optocoupler sensor

Reflective optocoupler used, for example, to distinguish the edges or for line detection. Case dimensions - 7 x 7 x 6 mm,through hole installation.
Index: UCC-00052
Index: UCC-00052
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.69 Price €0.69
  • Free shipping

Li-Pol Dualsky 2200mAh 20C 2S 7.4V

A powerful Dualsky lithium-polymer battery. Discharge current: continuous 20 C (44 A), instantaneous 30 C (66 A). Dimensions 100 x 34.5 x 16 mm. Weight: 119 g.
Index: AKU-00563
Index: AKU-00563
Unavailable
Regular price €14.40 Price €14.40
  • Free shipping

Li-Pol charger with balancer REDOX Beta Combo + power supply

Loader/unloader with built-in cell balance. Supports LiPo, LiIon and LiFe, NiCd, NiMH and Pb cells and packages. It also comes with a power supply, allowing direct...
Index: AKC-00557
Index: AKC-00557
Unavailable
Regular price €30.00 Price €30.00
  • Free shipping

GPIO module for Intel Edison

The module allows you to output GPIO pins from Intel Edison's computing platform to holes suitable for soldering the popular 2.54 mm goldpin connector - raster.
Index: SPF-00891
Index: SPF-00891
Unavailable
Regular price €13.72 Price €13.72
  • Free shipping

Solder sucker for tin OD-25

A device for removing tin excess. It has a Teflon tip, metal case with 20 mm in diameter. Length of the device is 228 mm.
Index: LUT-00630
Index: LUT-00630
Unavailable
Regular price €4.63 Price €4.63
  • Free shipping

Products from the same category

Soldering station ZD98 - 48W

Soldering station with soldering iron. It has the ability to adjust the temperature in the range from 150 °C to 450 °C. The total power of 48 watts.
Index: LUT-08719
Index: LUT-08719
In stock, shipping 24 hours!
(Check quantity)
Regular price €12.79 Price €12.79
  • Free shipping

Soldering fume absorber AKS-153 23W

The device removes fumes generating during soldering. It has two replaceable carbon filters. The absorption efficiency reaches 1 m3/min. Absorber is powered by mains voltage...
Index: LUT-05844
Index: LUT-05844
Czas oczekiwania: ok. 10-30 dni
Regular price €39.30 Price €39.30
  • Free shipping

Soldering station WEP 853D soldering iron, hotair with fan + power supply 15V/1A

The station has three main functions: hot air station and tip-based soldering iron, power supply 15V/1A, and RF signal tester. Temperature adjustment is available in the range...
Index: LUT-00908
Index: LUT-00908
In stock, shipping 24 hours!
(Check quantity)
Regular price €93.00 Price €93.00
  • Free shipping

Soldering station 995D

WEP 995D soldering station with hot air iron and tip-based soldering iron with a capacity of 75 W. The device is equipped with a PID microcontroller unit,  LCD display,...
Index: LUT-06363
Index: LUT-06363
In stock, shipping 24 hours!
(Check quantity)
Regular price €110.21 Price €110.21
  • Free shipping

Soldering station 2in1 hotair and grotto Zhaoxin 898D with a fan in flask

Grotto soldering iron with a heating power of 60 W and hotair in one. The total capacity of station - 760 W. The device has an adjustable temperature, standby mode and two LED...
Index: LUT-06274
Index: LUT-06274
In stock, shipping 24 hours!
(Check quantity)
Regular price €72.09 Price €72.09
  • Free shipping

Soldering station WEP 938D+ remembers settings 75W - two irons

Tip-based soldering station WEP 938D+ with a continuously adjustable temperature range from 100 °C to 480 °C.  The device is capable of connecting two soldering irons . It...
Index: LUT-08058
Index: LUT-08058
In stock, shipping 24 hours!
(Check quantity)
Regular price €77.91 Price €77.91
  • Free shipping

Soldering station hotair and tip-based WEP 992D with fan in iron - 700W

WEP 992D soldering station with hot air iron and tip-based soldering iron with a capacity of 75 W, used for soldering and desoldering of electronic components. The device is...
Index: LUT-06545
Index: LUT-06545
In stock, shipping 24 hours!
(Check quantity)
Regular price €101.14 Price €101.14
  • Free shipping

WEP 992D - Soldering station 2in1 hotair and soldering iron

Tip-based soldering iron and hot air iron in one. The total capacity of the station is 700 watts. The device has a PID controller, large and easy to read LCD display,...
Index: LUT-12653
Index: LUT-12653
In stock, shipping 24 hours!
(Check quantity)
Regular price €133.72 Price €133.72
  • Free shipping

Soldering station ZD-916 - 60W

Reliable and durable soldering and desoldering station made from high quality cells with capacity of 60 W. The device has a smooth regulation of the temperature. It allows for...
Index: LUT-08722
Index: LUT-08722
Czas oczekiwania: ok. 10-30 dni
Regular price €67.21 Price €67.21
  • Free shipping

Soldering Station WEP 936 NewDesign - 45W

Soldering station WEP 936 45 Wadjustable temperature range from 200 °C to 480 °C.
Index: LUT-03166
Index: LUT-03166
In stock, shipping 24 hours!
(Check quantity)
Regular price €24.53 Price €24.53
  • Free shipping

Soldering station Elwik RT-24 80W

Grotto soldering station Elwik RT-24 with a total power of 80 watts with adjustable temperature from 100 °C to 420 °C. The device allows for the grotto to be grounded. The kit...
Index: LUT-07409
Index: LUT-07409
In stock, shipping 24 hours!
(Check quantity)
Regular price €76.51 Price €76.51
  • Free shipping

TS100 mobile soldering station - 65W

Electric mini soldering iron model TS100 , powered from 12 V to 24 V through a 5.5 / 2.5 mm DC socket port. Temperature can be adjusted between 100°C and 400°C . The...
Index: DNG-17748
Index: DNG-17748
Waiting time about 10-30 days
Regular price €68.60 Price €68.60
  • Free shipping