- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Li-Pol pack Redox 350 mAh 20C 3S 11.1 V
This lithium polymer battery pack from Redox has a capacity of 350 mAh and consists of three cells. The output voltage is 11.1 V, and the constant discharge current is 20 C (7 A). The outputs of the battery are wires terminated with a DEAN socket and an output for a balancer. Li-Pol batteries are often used in modeling and robotics.
Li-Pol Redox 350 mAh 20C 3S 11.1 V battery.
The Li-Pol Redox 350 mAh pack has a DEAN connector.Redox battery specification
- Battery type: lithium polymer
- Connectors: DEAN socket and balancer output
- DEAN cable length: 11 cm
- Maximum charging current: 1C (0.35 A)
- Voltage: 11,1 V
- Capacity: 350 mAh
- Constant discharge current: 7 A (20C)
- Battery dimensions: 40 x 20 x 20 mm
- Weight: 39 g
We also offer chargers adapted to battery pack connectors.
What charger to choose for Li-Pol batteries?
When using Li-Pol pack s you should pay special attention to proper charging of cells. It is important to maintain balanced cells, i.e. to evenly charge (to the same voltage level) each of the cells in relation to the others. There are many chargers for Li-Pol packs. We recommend the simplest compact chargers or advanced microprocessor based chargers available in our range. Storage of the packs is also an important issue. If the cells will not be used for a long time it is worth putting them into the Storage level (microprocessor chargers have a program that will automatically put the packs into this state). This mode will charge or discharge the pack to the level of 3.7 V per cell - which is the best voltage in the context of Li-Pol pack performance, as well as its life.
CAUTION!
Before use, be sure to read the LI-POL BATTERY USE AND WARRANTY TERMS!
