Product description: GNSS module with pressure sensor, 6-axis IMU and magnetometer - NEO-M9N, BMP280, BMI270, BMM150 - for M5Stack Core - M5Stack M135
The GPS module with the NEO-M9N-00B system with a 92-channel GNSS receiver enables the reception of signals from GPS , GLONASS , Beidou and Galileo with an accuracy of 1.5 m . It simultaneously receives signals from as many as four GNSS sources, which provides highly precise measurements. The module is also equipped with a pressure sensor , a 6-axis IMU position sensor and an efficient 3-axis magnetometer, which combined allow for the collection of comprehensive data on position, orientation, altitude and other geographical information. The board is an extension to the M5Stack Core series development module.
The manufacturer has also prepared a detailed user guide , which makes it much easier to start working with the module and allows you to use all the functionalities it offers.
GNSS module with pressure sensor, 6-axis IMU and magnetometer - NEO-M9N, BMP280, BMI270, BMM150 - for M5Stack Core - M5Stack M135.
GNSS module with pressure sensor, 6-axis IMU and magnetometer.
Special features of the module
- It integrates a number of functionalities - GPS, six-axis position sensor, magnetometer and barometric sensor.
- It receives signals from GPS, GLONASS, Beidou and Galileo with an accuracy of 1.5 m and processes up to 4 readings simultaneously.
- Supports NMEA, UBX and RTCM protocols via UART or I2C interfaces.
- It has an external antenna that allows for individual configuration to suit design requirements.
- Backup coin cell battery and EEPROM ensure data security in the event of power loss.
- It is used in projects related to precise positioning, as well as in agriculture, logistics and environmental protection.
Suggested use of the overlay
- Drones that determine position and navigate to a target
- Smart farming
- Broadly understood logistics
- Geodetic measurements and cartography
Set contents
- GNSS module - extension for M5Stack development modules - 1 piece
- External GPS / BD antenna - length 1 m - 1 piece
- Antenna adapter - 1 piece
- M2 x 4 mm mounting screws - 2 pieces
- 1.5 mm Allen key - 1 piece
- 4-pin connection cable - 20 cm - 1 piece
Elements included in the set.
The module can receive signals from GPS, GLONASS, Beidou and Galileo with an accuracy of up to 1.5 m.
Technical specifications of the board
- Module type: extension for M5Core development modules
- Built-in chips: NEO-M9N, BMP280, BMI270, BMM150
- GNSS module: NEO-M9N
- supported satellites: GPS / QZSS, GLONASS, Galileo, BeiDou
- accuracy: 1.5 m
- maximum altitude: 80,000 m
- maximum G: ≤4
- maximum speed: 500 m/s
- number of supported channels: 92
- dynamic heading accuracy: 0.3 degrees
- maximum update rate: 25 Hz
- 6-axis IMU sensor: BMI270
- Accelerometer range: ± 2 g / ± 4 g / ± 8 g / ± 16 g
- gyroscope range: ± 125 dps / ± 250 dps / ± 500 dps / ± 1000 dps / ± 2000 dps
- 3-axis magnetometer: BMM150
- measurement range: ± 1300 uT (X, Y axis), ± 2500 uT (Z axis)
- measurement resolution: 0.3 uT
- Pressure sensor: BMP280
- measurement range: from 300 hPa to 1100 hPa
- accuracy: up to ± 0.12 hPa
- Communication interface: I2C bus
- I2C addresses: BMI270 - 0x69, BMM150 - 0x10, BMM280 - 0x76
- Module dimensions: 54 x 54 x 13.1 mm
- Weight: 14.4 g
