Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI - zdjęcie 1
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI - zdjęcie 2
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI - zdjęcie 3
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI - zdjęcie 4

MyoWare Muscle Sensor - a sensor for measuring EMG muscle activity - SparkFun SEN-13723

Index: SPF-05978 EAN: 869249000109

The sensor allows to control devices via bioelectrical signals generated by human muscles (EMG). The output is an analog signal that can be read using any microcontroller with converter A/C, for example, Arduino. The sensor requires the use of biomedical electrodes.

PLN182.93
PLN182.93 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
Compatibility: Arduino

Description

Sensor of electromyography (EMG), which measures the activity of muscles and, in proportional way, changes this value to a voltage ranging from 0 V to Vs, where Vs is the power supply voltage from 3.1 V to 5 V. It allows you to control various devices without the need to use the buttons and switches.

 

 
The module allows connection of the biomedical electrodes directly, without the need of cables. The sensor has output the RAW EMG, power pins with protection against reverse polarity, LEDs and built-in switch.
 
 
The module can be connected with, i.a. medical electrodes or heart rate monitor. In our offer there are also pads designed for MyoWare Muscle Sensor.

 

Specification

  • Supply voltage: 3.1 V to 5 V
  • Protection from reverse polarity of the supply voltage
  • Two modes of output
    • EMG Envelope
    • Raw EMG
  • The possibility of expanding the possibilities via available caps
  • Indicating LEDs 
  • Built-in switch
  • Adjustable amplification
  • Dimensions: 52 x 21 mm

 

Same-day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day! 

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia, Spain, The United Kingdom

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Cyprus, Finland, Greece, Ireland, Malta, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR


Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

MiniUSB B - A cable Esperanza EB-132 - 1,8m

USB cable (type A) - miniUSB cable (type B) used to connect your computer to devices equipped with mini USB-B sockets. It is 180 cm long.
Index: KAB-01090
Index: KAB-01090
Unavailable
Regular price PLN3.98 Price PLN3.98

Pro Micro - 3.3V/8MHz - Atmega32u4 module - SparkFun DEV-12587

Module based on the Arduino Leonardo, is characterized by small size. It has the AVR Atmega32U4 microcontroller. It is equipped with 20 digital inputs/outputs, as well as...
Index: SPF-01592
Index: SPF-01592
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN62.52 Price PLN62.52

Arduino Pro Mini 328 module - 3.3 V/8 MHz - SparkFun DEV-11114

The module based on the Arduino Uno, is characterized by small size and low profile. It has an Atmega328 microcontroller with 32 KB Flash memory, 2 KB RAM, 14 digital I/o, 6 of...
Index: SPF-01596
Index: SPF-01596
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN39.84 Price PLN39.84

Arduino Pro 328 module - 3,3V/8 MHz - SparkFun DEV-10914

Module based on Arduino Uno with ATmega328 system, is characterized by small size and low profile. It has 32 KB of Flash memory, 2 KB of RAM 14 digital of I/os, 6 of which can...
Index: SPF-01679
Index: SPF-01679
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN61.71 Price PLN61.71

Customers who bought this product also bought:

Conductive thread 3-ply 0,25 mm Adafruit - reel 18m

Thin, strong and smooth conductive thread made of stainless steel 316L. The product allows for hand and machine sewing. The thread has a low resistance of about 0.8 Ω per inch,...
Index: ODS-03145
Index: ODS-03145
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN34.88 Price PLN34.88

Precision screwdriver set NZ6 - 8 pcs.

The set includes a set of 8 screwdrivers useful at home or in RTV and GSM service. Screwdrivers fit all screws used in electronic devices. They have magnetic bits made of...
Index: NSZ-05845
Index: NSZ-05845
Unavailable
Regular price PLN8.86 Price PLN8.86

Set of 140 wires for breadboards

A kit of 140 wires of different length, to connect the fields on the breadboards (test).
Index: KAB-00678
Index: KAB-00678
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN8.86 Price PLN8.86

Connecting cables female-female 20cm - 40pcs.

Set includes 40 PCs of multi-colored connection cables with a length of 20 cm ended from both sides with the female connector on goldpin.
Index: KAB-01021
Index: KAB-01021
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN4.84 Price PLN4.84

Power supply multi-range Voice Kraft 3V-12V / 1,2A

Universal power supply with adjustable output voltage in the range of 3V-12V , with continuous output current up to 1.2A (momentary up to 2A). It has a set of the most...
Index: ZAS-01365
Index: ZAS-01365
Unavailable
Regular price PLN29.19 Price PLN29.19

Set of goldpin raster 2,54mm - maxi

The set includes the popular goldpin connectors, 2.54 mm pitch: straight male 1x40 and 2x40 strap, male angled 1x40 and 2x40 strap, female 1x40 and 2x40 strap. In addition, the...
Index: KAB-01451
Index: KAB-01451
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN8.05 Price PLN8.05

Biomedical electrodes - 10pcs - SparkFun SEN-12969

10 pieces of biomedical sensors that can be used during EEG, ECG and EMG examination. The device are of single use, they have a layer of a latex gel.
Index: SPF-02604
Index: SPF-02604
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN30.81 Price PLN30.81

Cables for biomedical electrodes - SparkFun CAB-12970

Wires ended on the one side with three connectors for biomedical electrodes, on the other, with jack connector of a 3.5 mm.
Index: SPF-02605
Index: SPF-02605
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN23.17 Price PLN23.17

MyoWare Cable Shield - EMG sensor jack

MyoWare Muscle Sensor plate. It allows the main module to be used at a distance, without having to be attached to the person being examined. It has a 3.5 mm jack connector for...
Index: SPF-05979
Index: SPF-05979
Unavailable
Regular price PLN13.74 Price PLN13.74

MyoWare Power Shield - power supply module for EMG sensor - SparkFun DEV-13684

Board designed for MyoWare Muscle Sensor. It provides power to the main unit using two CR2032 batteries. The batteries are connected in parallel to increase the capacity at a...
Index: SPF-05980
Index: SPF-05980
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN18.29 Price PLN18.29

MyoWare Proto Shield - prototype module for EMG sensor - SparkFun BOB-13709

Board is designed for MyoWare Muscle Sensor. It allows you to create any circuit and connect it to the main module. It has 8 x 15 mounting holes with the pitch of 2.54 mm.
Index: SPF-05981
Index: SPF-05981
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN8.54 Price PLN8.54

Connecting cables - female socket - crocodile - 10 pieces

Set of 10 wires. On the one side, there is a standard female socket (for goldpin), on the other end there is the crocodile connector.
Index: KAB-01050
Index: KAB-01050
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN8.86 Price PLN8.86

Products from the same category

Heartbeat Detection Sensor - Iduino SE049

A sensor that allows you to measure the pulse with your finger using a phototransistor. A red LED lights up each time it detects a pulse. Powered by 5 V.
Index: OST-14276
Index: OST-14276
Available, 24h shipping!
(Check quantity)
Regular price PLN3.66 Price PLN3.66

Biomedical electrodes - 10pcs - SparkFun SEN-12969

10 pieces of biomedical sensors that can be used during EEG, ECG and EMG examination. The device are of single use, they have a layer of a latex gel.
Index: SPF-02604
Index: SPF-02604
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN30.81 Price PLN30.81

Cables for biomedical electrodes - SparkFun CAB-12970

Wires ended on the one side with three connectors for biomedical electrodes, on the other, with jack connector of a 3.5 mm.
Index: SPF-02605
Index: SPF-02605
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN23.17 Price PLN23.17

Disposable ECG Electrodes Pack (12 pcs)

Disposable EKG electrodes designed for heart examination and other biomedical measurements. The set consists of 12 self-adhesive sensors of breathable fabric...
Index: DFR-07922
Index: DFR-07922
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN14.55 Price PLN14.55

DFRobot Gravity - pH analog sensor/meter

Analog pH meter with analog output. It allows you to measure water quality. It has an accuracy of +/- 0.1 pH, which is sufficient in most cases. Equipped with LED, BNC...
Index: DFR-05874
Index: DFR-05874
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN103.66 Price PLN103.66

DFRobot Gravity - analogue EMG sensor, electromyograph -OYMotio.n

The EMG sensor was created through the cooperation of DFRobot and OYMotion. EMG - electromyograph, sensor of electric activity of muscles and peripheral nerves of human. This...
Index: DFR-10833
Index: DFR-10833
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN137.40 Price PLN137.40

Sensor for measuring heart activity - AD8232 - SparkFun SEN-12650

Module for measuring electrical activity of the human heart. The output is an analog signal which can be saved as EKG. The sensor is easy to operate, the manufacturer provides...
Index: SPF-02654
Index: SPF-02654
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN69.02 Price PLN69.02

Particle Sensor Breakout - MAX30101 - SparkFun SEN-16474

The sensor is based on a system MAX30101 and allows for the determination of the distance, pulse, smoke, and even blinking of an eye. It has 3 LEDs and a very responsive...
Index: SPF-08065
Index: SPF-08065
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN85.37 Price PLN85.37

Fermion - Pulse Oximeter and Heart Rate Monitor - MAX30102 - I2C - DFRobot SEN0344

Sensor module with integrated MAX30102 chip from DFRobot. This is an integrated pulse oximetry biosensor module that allows you to measure heart rate and monitor saturation,...
Index: DFR-19196
Index: DFR-19196
Available
(Check quantity)
Regular price PLN40.57 Price PLN40.57

Heart rate monitor - SparkFun SEN-11574

Module for measuring the human heart rate, compatible with Arduino. It is working with the voltage from 3 V to 5 V, the output is the analog signal. The kit includes a probe...
Index: SPF-03063
Index: SPF-03063
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN105.28 Price PLN105.28

Grove - heart rate sensor with a clip on the ear

Set for monitoring the heart rate, contains an ear clip with a wire and receiver module. The results can be displayed on the monitor through a serial port. The supply voltage...
Index: SEE-04409
Index: SEE-04409
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN45.45 Price PLN45.45

DFRobot Gravity: Analog Heart Rate Monitor Sensor (ECG) For Arduino

Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog signal. The kit includes a probe,...
Index: DFR-07436
Index: DFR-07436
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN72.36 Price PLN72.36